Charles Machine Works has filed 10 recall campaigns with NHTSA since 2015, covering 3,691 vehicles or units by the manufacturer's own estimates.
Filed under 2 names, including "Charles Machine Works Inc", "Charles Machine Works, Inc.".
Charles Machine Works recall campaigns by report date, 2015 to 2026. 2026 runs through October.
Charles Machine Works campaigns by primary component, 2016 to 2026.
Share of campaigns remedied by a software update, Charles Machine Works against all manufacturers, by year.
Charles Machine Works campaigns covering each model year, last fifteen model years. A campaign counts once for each year it covers.
The ten most recent campaigns, by report date.
| Campaign | Filed | Subject | Component | Vehicles | Remedy |
|---|---|---|---|---|---|
| 22V-576 | Aug 4, 2022 | Vehicle certification label does not have the correct Gross Axle Weight Rating (GAWR) listed | Equipment | 1,087 | Part replacement |
| 21V-177 | Mar 15, 2021 | Trailers may be missing side reflex reflectors near the front of the trailer | Lighting | 456 | Inspection |
| 19V-490 | Jun 25, 2019 | Lock nuts that attach the hitch to the trailer may be insufficient to clamp the load after the hitch height has been adjusted | Trailer hitches | 290 | Not stated |
| 19V-487 | Jun 21, 2019 | Brake wire terminals may have been improperly crimped, which can result in the trailer brakes failing to apply when commanded | Brakes | 796 | Part replacement |
| 19V-154 | Mar 1, 2019 | Axle bearings may not have been greased | Suspension | 59 | Repair or modification |
| 18V-727 | Oct 18, 2018 | Jib boom on these vehicles can become loose from the latching pin mechanism, allowing the boom to swing outside the trailer while being towed | Structure | 96 | Part replacement |
| 16V-541 | Jul 19, 2016 | Affected trailers may have an incorrect wiring harness that could result in the brakes not applying in the event that the trailer separates from… | Electrical system | 79 | Not stated |
| 15V-435 | Jul 8, 2015 | Affected trailers may have an incorrect wiring harness that would result in the brakes not applying should the trailer breakway from the tow vehicle | Electrical system | 69 | Not stated |
| 15V-159 | Mar 20, 2015 | Affected trailers may have been manufactured with axles that have incorrect wheel bearings | Suspension | 169 | Part replacement |
| 15V-158 | Mar 18, 2015 | Wheel hubs of the affected trailers may have incorrect bearing pre-loads which can cause the trailer wheels to lock up | Suspension | 590 | Part replacement |
Vehicles or units affected, millions, any year.