Manufacturer profile

Hickory Springs Manufacturing

Hickory Springs Manufacturing has filed 10 recall campaigns with NHTSA since 2015, covering 72k vehicles or units by the manufacturer's own estimates.

Campaigns filed in 2026 to date0No campaigns in 2025
Vehicles affected02026 to date
Campaigns on file102015 to 2019
Do-not-drive or park-outside0Campaigns with an advisory

Filed under the name "Hickory Springs Manufacturing Company".

Campaigns per year

Hickory Springs Manufacturing has averaged 0 campaigns a year since 2021, below its 2017 peak of 3

Hickory Springs Manufacturing recall campaigns by report date, 2015 to 2026. 2026 runs through October.

01232015201620173201820192020202120222023202420252026
Source: NHTSA ODI recalls file. The lighter column is a partial year.
Components

Seats are Hickory Springs Manufacturing's most recalled component since 2016

Hickory Springs Manufacturing campaigns by primary component, 2016 to 2026.

Seats
4
Seat belts
2
Equipment
1
Airbags
1
Source: NHTSA ODI. Each campaign counted once.
Remedy type

Hickory Springs Manufacturing uses software fixes less than the industry: 0% of its 2018 campaigns

Share of campaigns remedied by a software update, Hickory Springs Manufacturing against all manufacturers, by year.

Hickory Springs ManufacturingAll manufacturers
010%20%30%2016201820202022202420260%18%
Source: NHTSA ODI remedy descriptions, classified by rule (see Methodology).
Model years covered

Campaigns by model year covered

Hickory Springs Manufacturing campaigns covering each model year, last fifteen model years. A campaign counts once for each year it covers.

No campaigns match these filters.Reset filters
Source: NHTSA ODI recalls file.
Latest campaigns

The latest Hickory Springs Manufacturing filings

The ten most recent campaigns, by report date.

Latest Hickory Springs Manufacturing campaigns
CampaignFiledSubjectComponentVehiclesRemedy
19E-010Feb 8, 2019In a hard braking situation or vehicle crash event, the barrier may not properly restrain an unbelted seat occupantSeats6,786Repair or modification
18E-098Oct 30, 2018Bolts that secure the rear of the seat pedestal to the floor may fracture, allowing the pedestal to detach from the bus floorSeats100Repair or modification
18E-083Aug 15, 2018These seats may be missing a warning label on the lower restraint strapEquipment5,906Repair or modification
18E-056Jul 17, 2018Foam in the knee impact area of the lower seat back may not absorb enough impact in the event of a crashSeats31,990Not stated
17E-045Aug 8, 2017These seats were manufactured with integral D-Ring mounting studs that may have inadequate padding between the occupant and the D-ring mounting studSeats6,052Not stated
17E-026May 15, 2017Outside edge seam of the seat cover may not open up as designed, possibly affecting the deployment of the seat-mounted air bags in the event of a…Airbags29Part replacement
17E-019Mar 21, 2017These seats may have a loose or missing D-ring mounting nut, allowing the shoulder belt D-ring to detach in a crashSeat belts1,549Repair or modification
16E-089Dec 5, 2016Affected seats are equipped with Atwood slide tracks that may not properly engage, allowing the seats to move in the event of a crashSeat belts50Part replacement
15E-032May 1, 2015Affected seats may not meet the flammability requirements of Federal Motor Vehicle Safety Standard (FMVSS) No. 302, "Flammability of Interior…Seats1,780Part replacement
15E-013Feb 25, 2015Rivets joining the 2nd, 3rd, and 4th steps may shear and fail when weight is placed upon the stepsEquipment17,469Not stated
Source: NHTSA ODI.
Largest campaigns

Hickory Springs Manufacturing's five largest campaigns on file

Vehicles or units affected, millions, any year.

  1. 2018 Foam in the knee impact area of the lower…0.03M
  2. 2015 Rivets joining the 2nd, 3rd, and 4th steps…0.02M
  3. 2019 In a hard braking situation or vehicle…0.01M
  4. 2017 These seats were manufactured with integral…0.01M
  5. 2018 These seats may be missing a warning label…0.01M
Source: NHTSA ODI.