Iowa Mold Tooling has filed 7 recall campaigns with NHTSA since 2016, covering 2,541 vehicles or units by the manufacturer's own estimates.
Filed under the name "Iowa Mold Tooling Co., Inc.".
Iowa Mold Tooling recall campaigns by report date, 2016 to 2026. 2026 runs through October.
Iowa Mold Tooling campaigns by primary component, 2016 to 2026.
Share of campaigns remedied by a software update, Iowa Mold Tooling against all manufacturers, by year.
Iowa Mold Tooling campaigns covering each model year, last fifteen model years. A campaign counts once for each year it covers.
The ten most recent campaigns, by report date.
| Campaign | Filed | Subject | Component | Vehicles | Remedy |
|---|---|---|---|---|---|
| 23E-042 | May 31, 2023 | Stabilizer beams may have welds that crack over time and break under load | Equipment | 13 | Part replacement |
| 22E-067 | Aug 15, 2022 | Welds on the stabilizer beams may crack over time, or break under load | Equipment | 31 | Part replacement |
| 18E-105 | Nov 16, 2018 | These wireless transmitters have a diode that can fail, possibly causing the crane to move in an unintended manner | Electrical system | 20 | Part replacement |
| 17E-067 | Nov 13, 2017 | These cranes have incorrect stabilizer arm locking pins that may not engage properly allowing the stabilizer arm to extend from the side of the… | Equipment | 19 | Part replacement |
| 17V-515 | Aug 18, 2017 | These vehicles are equipped with a front jump start plug kit installed under the hood at the chassis battery | Electrical system | 38 | Part replacement |
| 16E-012 | Feb 17, 2016 | Affected cranes have a valve bank cover that may crack and fall from the crane while the crane is being transported | Equipment | 1,598 | Part replacement |
| 16V-088 | Feb 16, 2016 | Affected vehicles are fitted with IMT Series III cranes, models 6000, 7500, 8600, 9500, 10000, 12000, and 14000, which have a valve bank cover… | Equipment | 822 | Part replacement |
Vehicles or units affected, millions, any year.