Campaigns per year
Isuzu Motors filed 4 campaigns in 2025, its most in 4 years
Isuzu Motors recall campaigns by report date, 2022 to 2026. 2026 runs through October.
Source: NHTSA ODI recalls file. The lighter column is a partial year.
Isuzu Motors has filed 11 recall campaigns with NHTSA since 2022, covering 68k vehicles or units by the manufacturer's own estimates.
Filed under the name "Isuzu Motors Limited".
Isuzu Motors recall campaigns by report date, 2022 to 2026. 2026 runs through October.
Isuzu Motors campaigns by primary component, 2022 to 2026.
Share of campaigns remedied by a software update, Isuzu Motors against all manufacturers, by year.
Isuzu Motors campaigns covering each model year, last fifteen model years. A campaign counts once for each year it covers.
The ten most recent campaigns, by report date.
| Campaign | Filed | Subject | Component | Vehicles | Remedy |
|---|---|---|---|---|---|
| 26V-210 | Apr 1, 2026 | Chassis and/or cab wire harnesses may chafe against metal components, leading to harness failure | Electrical system | 16,759 | Part replacement |
| 25V-719 | Oct 22, 2025 | Axle stabilizer bracket bolts may crack and break, allowing the bracket to detach from the vehicle | Suspension | 17,084 | Part replacement |
| 25V-630 | Sep 19, 2025 | Fuel heater may overheat, melting the casing and allowing fuel to leak into the electrical connector | Fuel system | 11,385 | Part replacement |
| 25V-319 | May 16, 2025 | Gap between the bus bar and connection terminal may cause the system to overheat and turn off the drive motor | Electrical system | 73 | Part replacement |
| 25V-217 | Apr 28, 2025 | Due to a mix of incompatible coolants, debris may build up in the cooling system, causing the cooling pump to fail | Engine and cooling | 73 | Part replacement |
| 24V-467 | Jun 21, 2024 | Tie rod assemblies may contain ball studs that have been incorrectly heat-treated, which can cause them to break, and possibly result in tie rod… | Steering | 38 | Part replacement |
| 24V-157 | Feb 28, 2024 | Mobileye camera cable may have been routed improperly, which can result in wiring damage and an overloaded electrical circuit | Electrical system | 2,891 | Part replacement |
| 23V-564 | Aug 10, 2023 | Chassis harness may have an incorrectly sized wire seal for the 2 externally mounted engine ignition coil pack fuse holders, which can allow water… | Electrical system | 19,479 | Part replacement |
| 23V-017 | Jan 23, 2023 | When the vehicles were modified to extend the frame to a 200-inch or 212-inch wheelbase, the ABS module and if equipped, optional ADAS Camera,… | Electrical system | 242 | Software update |
| 22V-508 | Jul 15, 2022 | Programming error in the ECM software calibration, resulted in the vehicles not having engine braking functionality | Engine and cooling | 11 | Software update |
Vehicles or units affected, millions, any year.