Manufacturer profile

Lippert Components

Lippert Components has filed 15 recall campaigns with NHTSA since 2006, covering 672k vehicles or units by the manufacturer's own estimates.

Campaigns filed in 2026 to date0No campaigns in 2025
Vehicles affected02026 to date
Campaigns on file152006 to 2021
Do-not-drive or park-outside0Campaigns with an advisory

Filed under 2 names, including "Lippert Components, Inc.", "LIPPERT COMPONENTS, INC.".

Campaigns per year

Lippert Components has averaged 0 campaigns a year since 2021, below its 2015 peak of 2

Lippert Components recall campaigns by report date, 2006 to 2026. 2026 runs through October.

00.511.52200620082010201220142201620182020202220242026
Source: NHTSA ODI recalls file. The lighter column is a partial year.
Components

Equipment is Lippert Components's most recalled component since 2016

Lippert Components campaigns by primary component, 2016 to 2026.

Equipment
4
Visibility and wipers
1
Powertrain
1
Brakes
1
Electrical system
1
Source: NHTSA ODI. Each campaign counted once.
Remedy type

Software remedies against the industry

Share of campaigns remedied by a software update, Lippert Components against all manufacturers, by year.

Lippert ComponentsAll manufacturers
010%20%30%2016201820202022202420260%18%
Source: NHTSA ODI remedy descriptions, classified by rule (see Methodology).
Model years covered

Model year 2012 is covered by the most Lippert Components campaigns, 1

Lippert Components campaigns covering each model year, last fifteen model years. A campaign counts once for each year it covers.

00.250.50.75120121
Source: NHTSA ODI recalls file.
Latest campaigns

The latest Lippert Components filings

The ten most recent campaigns, by report date.

Latest Lippert Components campaigns
CampaignFiledSubjectComponentVehiclesRemedy
21E-047May 21, 2021Adhesive that bonds the vented portion of the window may failEquipment46,281Part replacement
20E-074Oct 6, 2020Bedlift motor may fail due to internal gear failure, causing the bed to extend from a stowed positionEquipment426Part replacement
20E-039Jun 15, 2020Adhesive bond between the glass and the metal hinge frame of the frameless crank out vent windows may fail which could then allow the glass to…Visibility and wipers10,242Part replacement
18E-050Jul 2, 2018Water may enter the awning control module wiring harness and cause the awnings to partially deploy unexpectedly while the recreational vehicle is…Equipment14,383Part replacement
18E-007Jan 30, 2018Driveshaft may be misaligned, possibly resulting in excessive vibration at highway speedsPowertrain28Part replacement
17E-074Dec 15, 2017These jacks are operated with a laminated plastic touch pad which can crack or separate allowing water to enter and cause the jack to…Equipment12,584Part replacement
16E-088Dec 1, 2016Flange nuts may be loose on the backing plate for the roadside brakeBrakes206Part replacement
16E-078Oct 18, 2016Use of LCI's Sway Command with these trucks that are equipped with the Integrated Trailer Brake Control Module (ITBCM) could cause reduced braking…Electrical system304Part replacement
15E-078Sep 24, 2015Bolt that attaches the fan gear assembly to the steps may fracture allowing the fan gear to disengage from the stepsEquipment47,340Part replacement
15E-029Apr 7, 2015Affected axle hubs have wheel mounting studs that may failSuspension9,154Part replacement
Source: NHTSA ODI.
Largest campaigns

Lippert Components's five largest campaigns on file

Vehicles or units affected, millions, any year.

  1. 2013 It may be possible to remove the key from…0.53M
  2. 2015 Bolt that attaches the fan gear assembly to…0.05M
  3. 2021 Adhesive that bonds the vented portion of…0.05M
  4. 2018 Water may enter the awning control module…0.01M
  5. 2017 These jacks are operated with a laminated…0.01M
Source: NHTSA ODI.