McNeilus Truck and Manufacturing has filed 24 recall campaigns with NHTSA since 2015, covering 18k vehicles or units by the manufacturer's own estimates.
Filed under the name "McNeilus Truck & Manufacturing, Inc.".
McNeilus Truck and Manufacturing recall campaigns by report date, 2015 to 2026. 2026 runs through October.
McNeilus Truck and Manufacturing campaigns by primary component, 2016 to 2026.
Share of campaigns remedied by a software update, McNeilus Truck and Manufacturing against all manufacturers, by year.
McNeilus Truck and Manufacturing campaigns covering each model year, last fifteen model years. A campaign counts once for each year it covers.
The ten most recent campaigns, by report date.
| Campaign | Filed | Subject | Component | Vehicles | Remedy |
|---|---|---|---|---|---|
| 25V-800 | Nov 19, 2025 | Software error may cause the grabber fingers to move without input from the operator | Equipment | 160 | Software update |
| 25V-755 | Nov 3, 2025 | Side and rear reflex reflectors and rear clearance lights may be missing | Lighting | 70 | Repair or modification |
| 25V-754 | Nov 3, 2025 | Intermediate side reflex reflectors may be missing | Lighting | 115 | Repair or modification |
| 24V-914 | Dec 6, 2024 | Manual cylinder valves may develop stress corrosion cracks in the bottom plugged port, causing a leak | Fuel system | 15 | Part replacement |
| 24V-766 | Oct 15, 2024 | License plate light was installed in the wrong location and may not fully illuminate the license plate | Lighting | 431 | Repair or modification |
| 24V-632 | Aug 22, 2024 | Side loader arm may not be properly secured, resulting in unexpected movement while driving | Equipment | 4,300 | Software update |
| 22V-716 | Sep 23, 2022 | Ejector welds may fail, causing pressure and force to be placed on the hydraulic cylinder, which can cause it to penetrate through the side of the… | Equipment | 1,140 | Repair or modification |
| 22V-377 | May 26, 2022 | Labels that provide instructions to the operator on the proper operation of the mixer's functions were not installed | Equipment | 792 | Repair or modification |
| 22V-376 | May 26, 2022 | Insufficient clearance between the tire and fender hardware could allow the tire to contact the fender hardware, possibly resulting in fender or… | Structure | 8 | Part replacement |
| 20V-758 | Dec 8, 2020 | These mixer trucks do not have the position at which the pusher axles should be operated listed on the information plate | Suspension | 7 | Not stated |
Vehicles or units affected, millions, any year.