Terex Advance Mixer has filed 12 recall campaigns with NHTSA since 2016, covering 1,890 vehicles or units by the manufacturer's own estimates.
Filed under the name "Terex Advance Mixer, Inc.".
Terex Advance Mixer recall campaigns by report date, 2016 to 2026. 2026 runs through October.
Terex Advance Mixer campaigns by primary component, 2016 to 2026.
Share of campaigns remedied by a software update, Terex Advance Mixer against all manufacturers, by year.
Terex Advance Mixer campaigns covering each model year, last fifteen model years. A campaign counts once for each year it covers.
The ten most recent campaigns, by report date.
| Campaign | Filed | Subject | Component | Vehicles | Remedy |
|---|---|---|---|---|---|
| 25V-084 | Feb 13, 2025 | Front axle may have an incorrect thrust bearing installed | Powertrain | 29 | Part replacement |
| 24V-252 | Apr 4, 2024 | Bearing journals may not be fully seated in the steering knuckle assemblies, preventing the proper installation of the wheel end hub assemblies | Steering | 12 | Part replacement |
| 24V-002 | Jan 4, 2024 | Bolts connecting the drum to the drum drive plate may loosen, resulting in the drum separating from vehicle | Equipment | 128 | Part replacement |
| 23V-150 | Mar 8, 2023 | Improper installation or tightening of the steering shaft may cause it to come loose from the steering column and result in a loss of steering control | Steering | 271 | Repair or modification |
| 23V-148 | Mar 7, 2023 | Front-drive steer axle fasteners may not have been tightened sufficiently and could come loose, resulting in a complete separation of the axle… | Steering | 20 | Repair or modification |
| 22V-574 | Aug 4, 2022 | Engine control module (ECM) may experience an internal short-circuit, which can result in an unexpected engine shut down | Engine and cooling | 22 | Part replacement |
| 21V-981 | Dec 16, 2021 | Fuel tubes between the fuel rail and the injectors for cylinders four, five, and six may fatigue and crack, which can result in a high pressure… | Fuel system | 1,016 | Part replacement |
| 21V-456 | Jun 17, 2021 | Shaft key for the chute swing motor was not installed properly, which could result in unintentional chute movement | Equipment | 188 | Inspection |
| 20V-023 | Jan 17, 2020 | Axle output shafts were incorrectly heat treated, possibly causing them to fracture | Powertrain | 34 | Part replacement |
| 19V-152 | Mar 1, 2019 | Drive pins, a component with the axle sub-assembly, may have been cracked during assembly, possibly resulting in the pins fully fracturing | Brakes | 98 | Part replacement |
Vehicles or units affected, millions, any year.