2020 BMW M340I

53 complaints on file, page 1 of 3.

1. Filed Sep 13, 2026Failure Sep 13, 2026san jose, CAEngine

   I am reporting a safety concern involving BMW vehicles equipped with the B58 Technical Update (B58TU) engine, commonly found in model years 2019–2021. These vehicles utilize a variable-displacement engine oil pump containing an internal thermoplastic adjusting component responsible for regulating oil pressure. Field failures are increasingly being reported in which this internal component fractures, resulting in sudden loss or instability of engine oil pressure. The failure frequently occurs during cold-start operation in low ambient temperatures. When the component fails, oil pressure regulation becomes erratic or is lost entirely. In many cases, drivers receive little or no actionable warning prior to engine damage or vehicle disablement. Reported precursor symptoms include inability to electronically measure engine oil level, abnormal oil pressure behavior, or sudden drivetrain malfunction warnings. Failures may rapidly progress to engine shutdown or severe mechanical damage caused by oil starvation. Loss of lubrication can cause the vehicle to become disabled without warning while driving or shortly after startup. This creates a safety hazard, particularly when vehicles become immobilized in active traffic or during winter conditions the cold is when they fail the most, where occupants may be exposed to freezing temperatures while awaiting assistance. Replacement of the oil pump requires extensive disassembly of the vehicle and repairs commonly exceed $6,000–$8,000 for just the pump, assuming the motor is unharmed. Owners are currently unable to determine whether their vehicles contain the original thermoplastic oil pump design or a later revised version utilizing metal internal components, as VIN-based parts information now identifies updated components in the car even when no replacement has occurred and the old components are actually in the car. Also, BMW has actively removed the plastic part number out of all dealer networks as well.

   NHTSA complaint 11763922
2. Filed Sep 1, 2026Failure Jun 11, 2025Bronx, NYEngine

   Oil pump for the 2020 model is made with plastic internals. The passage that controls the flow of oil into your engine is made of plastic. The car didn’t even have 40,000 miles and the plastic broke causing the passage to be in a very close to shut position not allowing enough oil to enter the engine in higher rpm. The mechanic told me this is the biggest thing he is starting to see and he works for BMW Service center of Mamaroneck. He’s seen over 150+ B58TU (engine model) of the year 2020 with broken plastic in the oil pump. For the 2021 model year and up to 2026 they have updated the oil pump to metal internals and metal passageways solving the issue but are not helping us 2020 owners and aren’t taking any responsibility blaming it on owners. The repair cost over 3,000 dollars. I understand if it’s something they can’t figure out but they saw it was their own negligence on using better parts and they switch from plastic to metal oil pumps after they saw an increase of over 2,000+ 2020 bmws with the b58tu in it have this issue. There were no warnings, no lights on the dash, no check engine and no codes on the car or when read with a diagnostic scanner. I even included the difference between the 2020 oil pump (plastic) to the 2021 and up oil pump (metal) which was bought from BMW Parts in Mamaroneck. This is an oem part that they updated on their newer cars and won’t take responsibility for their negligence on their 2020 model.

   NHTSA complaint 11761189
3. Filed Aug 13, 2026Failure Aug 13, 2026South Lebanon, OHEngine

   I am reporting a premature oil pump failure on my 2020 BMW M340i xDrive with 42 thousand miles. The vehicle has been well maintained and has not experienced any oil pressure warning lights. However, the electronic engine oil level measurement repeatedly fails to complete once the engine is fully warmed up. I have also received stored BMW fault code 21B2C7 relating to engine oil pressure plausibility/excessive oil pressure. The fault currently shows as inactive, but it was not present previously. I have monitored engine oil pressure using diagnostic software. Pressure is generally around 38–42 psi at hot idle, approximately 44–48 psi during cruising, and can rise into the 60–78 psi range during acceleration. Although these readings are generally stable, the combination of the stored pressure plausibility fault and repeated inability to measure the engine oil level is concerning. I have also noticed a whining/humming noise from the front of the engine at low RPM, particularly during stop-and-go driving and while decelerating in first and second gear. There are numerous owner reports involving premature oil pump failures on BMW vehicles equipped with this generation of the B58 engine. The original oil pump used on earlier vehicles reportedly contains plastic internal components that can deteriorate over time and heat exposure. BMW later revised the oil pump design. BMW Korea has also reportedly begun providing repairs for certain B58 oil pump failures outside the normal warranty period while the issue is being investigated in that market. An engine oil pump is a critical lubrication component and is not a normal maintenance or wear item. Failure of the pump could result in insufficient or excessive oil pressure, loss of lubrication, severe engine damage, engine seizure, or loss of power while driving. I am submitting this complaint so NHTSA is aware of the potential pattern of premature oil pump failures affecting 2020 BMW M340i vehicles and

   NHTSA complaint 11756783
4. Filed Jul 31, 2026Failure Mar 1, 2026El Paso, TXEngine

   Component Involved:Engine Mechanical / Variable-Displacement Engine Oil Pump (Part #11418635032 / Updated #11419895359) Description of Safety Hazard / Defect:The early-generation B58TU engine features a variable-displacement oil pump equipped with an internal thermoplastic (plastic) adjusting ring. Due to continuous thermal cycling and mechanical stress, this plastic ring is prone to cracking and shattering without warning.When this internal component disintegrates, it causes an immediate loss of oil pressure to critical engine components. This creates a severe safety hazard, as the vehicle can experience a sudden loss of motive power or complete engine seizure while travelling at highway speeds, placing the occupants and surrounding traffic at immediate risk of a collision.Furthermore, a known software bug or sensor interference tied to this specific mechanical failure prevents the iDrive system from successfully completing an electronic oil level measurement, thereby masking the impending failure from the driver until catastrophic engine failure occurs.Relevance of International Actions:In May 2026, BMW Korea officially acknowledged this identical component design flaw by launching a proactive, free preventative repair campaign for B58TU engines manufactured between January 2019 and June 2021. BMW is actively replacing the defective plastic-ring oil pumps with an updated, all-metal version in that market.North American consumers are driving vehicles equipped with the exact same defective part, manufactured during the same window, and facing the same catastrophic safety risks. I am requesting that the agency open a formal defect investigation into BMW North America to mandate a safety recall or an extended component warranty program.

   NHTSA complaint 11754090
5. Filed Jul 14, 2026Failure Jul 14, 2026Deridder, LAEngine

   Safety Hazard: Oil Pump Failure Leading to Sudden Engine Stall (BMW B58TU engines) Description of Defect: The oil pump module in the 2020 BMW M340i (G20) and many other models between 2019-2020 contains internal plastic components that are prone to thermal degradation and premature failure. These plastic parts can crack or disintegrate, causing a sudden loss of oil pressure. BMW corrected this in later models with metal parts but failed to issue a recall or the older models containing plastic parts. Safety Risk: A failure of the oil pump leads to insufficient lubrication of critical engine components, which can result in a sudden and complete engine seizure while the vehicle is in motion. This causes an immediate loss of propulsion and power steering assist, significantly increasing the risk of a high-speed collision or being stranded in dangerous traffic conditions. Additional Note: This is a known mechanical defect where a critical engine component (oil pump) relies on non-durable plastic materials, creating an unreasonable safety risk for drivers and passengers due to potential catastrophic engine failure without prior warning.

   NHTSA complaint 11750244
6. Filed Jul 6, 2026Failure May 23, 2026Glendale, AZEngine

   I am submitting this complaint regarding a potential safety defect involving the engine lubrication system on my 2020 BMW M340i with the B58 engine. The vehicle was purchased used from a single owner with low mileage and comprehensive maintenance records, with no indication of prior engine or lubrication issues. While traveling at highway speed, the vehicle suddenly displayed a low oil pressure warning and simultaneously entered a protective shutdown strategy, resulting in a significant loss of engine power. This forced me to rapidly slow down and merge across multiple lanes of traffic to reach the shoulder, creating a dangerous situation with a substantial risk of a rear-end or multi-vehicle collision. There were no warning lights, fault messages, drivability concerns, or other symptoms before this incident. According to the authorized BMW dealership that inspected the vehicle, the engine experienced an oil pump failure that caused a loss of oil pressure, resulting in internal engine damage. The dealership found metal shavings in the engine oil and recommended complete engine replacement rather than repairing the oil pump due to the extent of the damage. The vehicle and failed components are available for inspection upon request. Based on the dealership's diagnostic findings, there were no stored oil pressure fault codes prior to the failure; the only oil pressure warning occurred at the time the engine lost power. I am concerned that this indicates the vehicle did not provide meaningful advance warning before a catastrophic failure occurred. I believe this may represent a defect in the oil pump assembly that warrants investigation. I have seen many reports from other owners discussing failures involving the B58 oil pump assembly, including concerns about an internal plastic component that many owners proactively replace with an aftermarket metal component to reduce the risk of failure. This failure posed an incredible safety risk to me and others on the road.

   NHTSA complaint 11748524
7. Filed May 12, 2026Failure May 8, 2026Tujunga, CAEngine

   Engine oil pump is failing. Early production 2019-2020 model years are made of plastic which can crack and break resulting in engine failure while driving. This is a well documented issue regarding the BMW B58 Engine (2nd Generation) They have since updated the engine oil pump part to a durable metal pump on newer models leaving the older ones with the bad part with no resolution. The vehicle no longer measures the oil level and is a symptom of the pump starting to fail. There is no telling when it may go out and it will be too late at that point as it results in complete engine failure/seizure while driving without proper pressure and lubrication. The local BMW Dealer says they are unable to help as BMW does not have a recall or technical service bulletin addressing this issue leaving owners with this plastic oil pump to pay out of pocket when this part fails destroying the motor. This is a critical safety hazard as the motor may shut off or malfunction at any given time while driving. The vehicle may produce a warning light or malfunction codes via the OBD, but at that point may be too late as the damage has already occurred. My independent bmw mechanic has also stated he sees many cars within this model year timeframe facing this issue as they age outside of the warranty period quoting $5K+ to ensure safety and fix this issue properly with the updated metal part. This is ridiculous as these cars by now are outside of the factory warranty period of 4 years and 50,000 miles. My vehicle does not measure the oil anymore even after a oil change leaving a big question mark of whether there is the proper amount of oil to lubricate the engine or not. I have attached pictures of the plastic oil pump showing cracks and breaks as well as the updated fully metal oil pump. There is no peace of mind when driving this vehicle due to this issue.

   NHTSA complaint 11737366
8. Filed Apr 14, 2026Failure Sep 1, 2023Gaithersburg, MDPower train, Wheels

   Component: Front differential / xDrive drivetrain system. Vehicle is available for inspection upon request. Description: My 2020 BMW M340i xDrive has exhibited a persistent whining noise from the front drivetrain since approximately 38,000 miles. The noise varies with speed and load and appears to originate from the front differential. A BMW dealership inspected the vehicle and acknowledged the noise but declined repair under warranty. This condition is consistent with premature wear of internal differential components such as gears or bearings, or improper lubrication. Differentials should not produce whining noises at this mileage, indicating a potential defect. Safety Risk: The front differential is critical to torque distribution in the all wheel drive system. Progressive failure could result in drivetrain binding, uneven torque delivery, or loss of AWD functionality. In a worst case scenario, partial or full differential seizure could occur, leading to sudden resistance, instability, or loss of control. These risks are heightened at highway speeds or in low traction conditions such as rain or snow. The vehicle provides no warning lights or messages despite the abnormal condition, meaning failure could occur without advance notice. Inspection: Issue confirmed by BMW dealership. No repair or corrective action performed. Warnings/Symptoms: No warning lights or system messages. Only symptom is a persistent whining noise from the front drivetrain. Additional Information: I am aware of similar complaints from other BMW xDrive owners reporting drivetrain whining, grinding, and vibration, suggesting a broader pattern of premature differential wear.

   NHTSA complaint 11731034
9. Filed Apr 10, 2026Failure Feb 10, 2026Tracy, CAEngine

   Safety Hazard: Oil Pump Failure Leading to Sudden Engine Stall (BMW B58TU engines) Description of Defect: The oil pump module in the 2020 BMW M340i (G20) contains internal plastic components that are prone to thermal degradation and premature failure. These plastic parts can crack or disintegrate, causing a sudden loss of oil pressure. Increasing wear on internal engine components and even leading to irreversible engine damage. Safety Risk: A failure of the oil pump leads to insufficient lubrication of critical engine components, which can result in a sudden and complete engine seizure while the vehicle is in motion. This causes an immediate loss of propulsion and power steering assist, significantly increasing the risk of a high-speed collision or being stranded in dangerous traffic conditions. Additional Note: This is a known mechanical defect where a critical engine component (oil pump) relies on non-durable plastic materials, creating an unreasonable safety risk for drivers and passengers due to potential catastrophic engine failure without prior warning. BMW is aware of this defect as they chose to update the design in future models, switching from the brittle plastic to more metal components in the updated design. This shows clearly that this design is compromised and was a risk to continue implementing.

   NHTSA complaint 11730475
10. Filed Mar 27, 2026Failure Mar 27, 2026Senoia, GAEngine

    Oil pump failure

    NHTSA complaint 11727567
11. Filed Mar 27, 2026Failure May 14, 2025Fresno, CAEngine

    I’ve been doing research for this particular issue on the 2020 bmw m340i (B58 engine). There is a plastic housing on the oil pump that seems to completely collapse due to consistent heat cycles (starting the vehicle). As far as I know that common symptoms include not being able to read oil levels and this is what commonly shows a faulty or unreliable oil pump that could potential cause a oil leak into engine where it gets hot and cause a fire. This is extremely dangerous and only the vehicles made from 2019-2020 have this plastic part that should be recalled from factory.

    NHTSA complaint 11727385
12. Filed Mar 23, 2026Failure Dec 19, 2025Liverpool, NYEngine

    Engine failed suddenly while driving on a highway. While driving at highway speed, warning lights and messages appeared indicating oil pressure is low and to turn off the engine immediately. The vehicle was towed to the shop where it was discovered that the oil pump, which was made out of plastic, had suffered a catastrophic failure. Was told if the engine continued running any longer it would have seized which could pose a very serious safety issue when at highway speeds. The vehicle had 55,000 miles at time of failure. Repairs totaled nearly $6,000 including towing and rental with a month of lost vehicle use. The failed oil pump was retained.

    NHTSA complaint 11726317
13. Filed Mar 18, 2026Failure Mar 18, 2026New York, NYEngine

    I am reporting a safety concern involving BMW vehicles equipped with the B58 Technical Update (B58TU) engine, commonly found in model years 2019–2021. These vehicles utilize a variable-displacement engine oil pump containing an internal thermoplastic adjusting component responsible for regulating oil pressure. Field failures are increasingly being reported in which this internal component fractures, resulting in sudden loss or instability of engine oil pressure. The failure frequently occurs during cold-start operation in low ambient temperatures. When the component fails, oil pressure regulation becomes erratic or is lost entirely. In many cases, drivers receive little or no actionable warning prior to engine damage or vehicle disablement. Reported precursor symptoms include inability to electronically measure engine oil level, abnormal oil pressure behavior, or sudden drivetrain malfunction warnings. Failures may rapidly progress to engine shutdown or severe mechanical damage caused by oil starvation. Loss of lubrication can cause the vehicle to become disabled without warning while driving or shortly after startup. This creates a safety hazard, particularly when vehicles become immobilized in active traffic or during winter conditions the cold is when they fail the most, where occupants may be exposed to freezing temperatures while awaiting assistance. Replacement of the oil pump requires extensive disassembly of the vehicle and repairs commonly exceed $6,000–$8,000 for just the pump, assuming the motor is unharmed. Owners are currently unable to determine whether their vehicles contain the original thermoplastic oil pump design or a later revised version utilizing metal internal components, as VIN-based parts information now identifies updated components in the car even when no replacement has occurred and the old components are actually in the car. Also, BMW has actively removed the plastic part number out of all dealer networks as well.

    NHTSA complaint 11725310
14. Filed Mar 17, 2026Failure Mar 17, 2026Germantown, TNEngine

    EXHIBITING SIGNS OF NOT BEING ABLE TO READ OIL LEVELS WHICH IS A POTENTIAL SIGN OF OIL PUMP FAILURE DUE TO PLASTIC INTERNAL COMPONENTS THAT HAS OCCURED IN 2020 MODELS.

    NHTSA complaint 11724900
15. Filed Mar 1, 2026Failure Mar 1, 2026Dallas, TXEngine

    I am reporting a safety concern involving BMW vehicles equipped with the B58 Technical Update (B58TU) engine, commonly found in model years 2019–2021. These vehicles utilize a variable-displacement engine oil pump containing an internal thermoplastic adjusting component responsible for regulating oil pressure. Field failures are increasingly being reported in which this internal component fractures, resulting in sudden loss or instability of engine oil pressure. The failure frequently occurs during cold-start operation in low ambient temperatures. When the component fails, oil pressure regulation becomes erratic or is lost entirely. In many cases, drivers receive little or no actionable warning prior to engine damage or vehicle disablement. Reported precursor symptoms include inability to electronically measure engine oil level, abnormal oil pressure behavior, or sudden drivetrain malfunction warnings. Failures may rapidly progress to engine shutdown or severe mechanical damage caused by oil starvation. Loss of lubrication can cause the vehicle to become disabled without warning while driving or shortly after startup. This creates a safety hazard, particularly when vehicles become immobilized in active traffic or during winter conditions the cold is when they fail the most, where occupants may be exposed to freezing temperatures while awaiting assistance. Replacement of the oil pump requires extensive disassembly of the vehicle and repairs commonly exceed $6,000–$8,000 for just the pump, assuming the motor is unharmed. Owners are currently unable to determine whether their vehicles contain the original thermoplastic oil pump design or a later revised version utilizing metal internal components, as VIN-based parts information now identifies updated components in the car even when no replacement has occurred and the old components are actually in the car. Also, BMW has actively removed the plastic part number out of all dealer networks as well.

    NHTSA complaint 11721301
16. Filed Feb 28, 2026Failure Feb 27, 2026West Fargo, NDEngine

    Oil pump is made of plastic causing it to fail after a certain time and can lead to a total engine loss if not swapped out with BMW’s updated oil pump. They are aware of the issue but neglecting to handle the problem.

    NHTSA complaint 11721171
17. Filed Feb 28, 2026Failure Mar 4, 2025Los Angeles, CAEngine, Unknown or other

    Oil pump in B58 BMW engines 2019-2022 has been a major safety concern that results in catastrophic failure while driving the vehicle. All because of BMW using a plastic component and quietly changed it, meanwhile hundreds of people had a major oil leak and engine seizures on hwy and $5k+ repairs.

    NHTSA complaint 11721135
18. Filed Feb 27, 2026Failure Feb 27, 2026Moore, SCEngine

    Oil Pump Failed its common issue on them but no recall

    NHTSA complaint 11721090
19. Filed Feb 15, 2026Failure Jan 1, 2026Buffalo, NYElectrical system, Engine

    The ignition start is not clean and delayed. There is already a recall 25V-644. There is "No remedy available" for this model per inquiry with local BMW dealer in Buffalo NY 14221 made 3 weeks ago. I am fearful of an electrical fire from overheating. I do smell an intermittent burning smell but it may in the outside environment rather than from under my hood.

    NHTSA complaint 11718142
20. Filed Jan 30, 2026Failure Dec 1, 202546,500 milesLos Angeles, CACrankcase (pcv)

    The contact owns a 2020 BMW M340I. The contact stated that after an oil change was performed by an independent mechanic, there was a large amount of gray smoke coming from the exhaust pipe while accelerating from a complete stop. There was no warning light illuminated during the failure. The vehicle was taken to various independent mechanics, and the failure was associated with the PCV (Positive Crankcase Ventilation) valve cover. The contact stated that there was a recall on other model vehicles for the failure; however, neither the VIN nor the model vehicle was included in the recall. The manufacturer was notified of the failure. The vehicle was not repaired. The failure mileage was approximately 46,500.

    NHTSA complaint 11714559