Model year

2017 BMW R Nine T

Body and fuel not decoded. Owner complaints on file from no date to no date.

Recall campaigns covering this model year13,368 vehicles or units across those campaigns
Owner complaints0Not enough peers on file
Severity indexNoneCrash, fire, injury or death per 100
First 24 months0Complaints in its first two years
Complaints over time

Complaints about the 2017 BMW R Nine T by year filed

Owner complaints about this model year, by the year they were filed with NHTSA.

No campaigns match these filters.Reset filters
Source: NHTSA ODI complaints file. The lighter column runs through October.
Components

Complaints by component

Owner complaints by component. Hover or focus a bar for the crash, fire, injury or death count.

No campaigns match these filters.Reset filters
Source: NHTSA ODI complaints file. A complaint can name more than one component; it is counted under the first.
Recalls

One recall campaign covers the 2017 BMW R Nine T

Check a specific vehicle by VIN on NHTSA's site: a campaign may cover only part of a model year's production.

Recall campaigns for the 2017 BMW R Nine T
CampaignFiledSubjectComponentVehiclesRemedy
17V-502Aug 14, 2017Bolts that connect the right-side swingarm pivot pin to the frame may loosenStructure3,368Repair or modification
Source: NHTSA ODI recalls file.
Owner complaints

What owners reported about the 2017 BMW R Nine T

The full text of every complaint filed with NHTSA about this model year, newest first. Complaints are filed by owners and are not verified by NHTSA; NHTSA removes personal details before publishing.

0 complaints on file.

    Source: NHTSA ODI complaints file.
    Investigations

    NHTSA has not opened an investigation on this model year

    Source: NHTSA ODI investigations file.
    Service bulletins

    85 manufacturer communications cover this model year

    Technical service bulletins and other notices the manufacturer sent to dealers. A bulletin is not a recall; the 60 most recent are listed.

    • MC330224 Mar 18, 2024 · Service Bulletin/Repair Instructions
      After close inspection of the manufacturing process, there is a weld seam at the hollow shaft and crown wheel connection in the rear drive that is not to specification in a few rear drives. Depending on riding habit, this can lead to slipping and loss of pr…
    • B611305 Jan 11, 2024 · Service Bulletin/Repair Instructions
      The electrical system of BMW vehicles has been subject to an ongoing development process over the last few years. This has led to increased demands being placed on the battery. This document covers important information for the dealer on how to handle âdisc…
    • MC000222 Nov 8, 2022 · Service Bulletin/Repair Instructions
      BMW Motorrad is aware of a number of cases in which the screw connections of the Paralever link and/or the rear brake caliper have loosened in customer vehicles while driving.
    • SISIB011317 Jun 1, 2017 · Service Bulletin/Repair Instructions
      Shipping specific non-deployed vehicle safety devices to lighting resources, LLC
    • SIM010917 Jun 1, 2017 · Service Bulletin/Repair Instructions
      Shipping specific non-deployed vehicle safety devices to lighting resources, llc. This service Information bulletin provides information on shipping "specific" noin-deployed vehicle safety devices that are classified as Dangerous Goods (DG) to Lighting reso…
    • B3106170621 Jun 22, 2017 · Service Bulletin/Repair Instructions
      Please return all part(s) to your facing Regional Distribution Center (RDC). Submit for return using a YR26 damage claim with order reason BM2. A valid BMW delivery and delivery item number must be entered, and TEC73 must appear in the text of your TEC claim.
    • MC000521 Sep 20, 2021 · Service Bulletin/Repair Instructions
      One of the following situations can occur when connecting to BN2000 motorcycles: 1. The installed control units cannot be found when reading out with ISTA. 2. Control units initially communicate after connecting to the vehicle, but communication later stops.
    • MC610821 Jul 13, 2021 · Service Bulletin/Repair Instructions
      When diagnosing fault codes (0x3A13D7, 0x3A13D9), technicians erroneously condemn the electronic throttle grip, which analyses show is rarely the culprit.
    • MC110521 May 5, 2021 · Service Bulletin/Repair Instructions
      During quality analysis, an issue was identified with a small group of sixteen (16) motorcycles that mayaffect crankshaft bearing wear.
    • MC60214068 Nov 26, 2014 · Service Bulletin/Repair Instructions
      One or more of the 12 bolts on the R nine T silencer are missing, see accompanying picture.
    • MC59823415 Sep 10, 2014 · Service Bulletin/Repair Instructions
      Oil leak immediately after replacing cylinder head cover seal set.
    • MC3600118 Apr 1, 2019 · Service Bulletin/Repair Instructions
      During the course of quality analysis, it was determined by BMW Motorrad that in the production period from February 2018 to end of June 2018, cross-spoked wheels with reduced spoke tension have been produced.
    • MC62694734 Jun 1, 2016 · Service Bulletin/Repair Instructions
      Counterbalance shaft seal leaking. Faulty seal contact surface of the balance weight.
    • B001016 Jan 1, 2017 · Service Bulletin/Repair Instructions
      ?Technical Service NEW VEHICLE DELIVERY TO CENTER: VEHICLE WILL NOT START WHILE IN TRANSPORT MODE
    • B661917 Sep 1, 2018 · Service Bulletin/Repair Instructions
      ?SERVICE ACTION: CHECK AND REPLACE LANE CHANGE WARNING SENSOR. The Lane Change Warning sensor may have been produced with faulty components. This may lead to a failure of the Lane Change Warning system (SWW). Lane Change Warning sensor hardware defect.
    • B111117 Sep 1, 2018 · Service Bulletin/Repair Instructions
      ?ENGINE LEAK DIAGNOSIS ON TURBOCHARGED V8 ENGINES. When diagnosing an engine oil leak or a coolant leak on turbocharged V8 engines it is necessary to use a borescope to identify if the source of the leak is from under the turbochargers. Engine oil or coola…
    • B720417 Oct 1, 2018 · Service Bulletin/Repair Instructions
      FALSE WARNINGS THAT THE FRONT PASSENGER SEAT IS OCCUPIED WITHOUT THE SEAT BELT BUCKLED. Acoustic and visual warnings indicate that the front passenger seat is occupied and the seat belt is not fastened, when the seat is actually unoccupied. If the situation…
    • B170418 Oct 1, 2018 · Service Bulletin/Repair Instructions
      DELIVERY STOP. LOW TEMPERATURE COOLANT SYSTEM.A Delivery Stop has been issued (effective October 16, 2018) on Model Year 2019 BMW 5 and 7 Series vehicles that have been produced from September 13-14, 2018. There is a possibility that the affected vehicles d…
    • MC2300117 May 1, 2017 · Service Bulletin/Repair Instructions
      Customer complains about an operating failure on the left or right multifunction switch.
    • B620717 May 1, 2017 · Service Bulletin/Repair Instructions
      INSTRUMENT CLUSTER REMAINS DARK & DOES NOT START UP. The instrument cluster display remains dark when the vehicle is started. Software in the instrument cluster incorrectly initiates the protection mode causing the cluster display to remain dark.
    • B512117 May 1, 2017 · Service Bulletin/Repair Instructions
      "RATTLE IN THE ""REPLACEMENT"" DOOR ASSEMBLY. Rattle or vibration noises from door while driving on uneven surface after door replacement. Note: This issue only occurs in replacement door assemblies - this not a vehicle production issue CAUSE The replacem…
    • MC59686312 Sep 1, 2014 · Service Bulletin/Repair Instructions
      Speedometer display incorrect. Speddometer displays faster than actual speed.
    • MC57213601 Jan 1, 2014 · Service Bulletin/Repair Instructions
      Pillion seat cover - snap-lock coupling may become damaged. Cause is burr in the opening in the brace of the storage cover.
    • MC62133778 Dec 1, 2015 · Service Bulletin/Repair Instructions
      Map data should be stored on a 64 GB SD card. In GARMIN Express the note appears that a maximum of 32 GB is possible.
    • MC61461571 Jun 1, 2015 · Service Bulletin/Repair Instructions
      Mist forms in the headlight. This is due to condensation and goes away again.
    • MC61348081 Jun 1, 2015 · Service Bulletin/Repair Instructions
      The ignition remains on, even though the ignition swithc has been turned off. The relatively high power requirement of the ABS contro,l unit can cause the contacts to bond.
    • B661416 Jul 1, 2016 · Service Bulletin/Repair Instructions
      "PARKING ASSISTANT" OPERATION IS JERKY. After programming with ISTA/P versions 3.59.0 and/or 3.59.1, vehicle operation is jerky when using the Parking Assistant. SAS (Optional Equipment System) control module software.
    • B661016 Jul 1, 2016 · Service Bulletin/Repair Instructions
      GARAGE DOOR OPENER CANNOT BE PROGRAMMED. The vehicle's rear view mirror integrated universal remote control is incompatible with some garage door (or fence) opener devices installed at the driver's residence and/or business. If the garage door opener was ma…
    • B652016 Jul 1, 2016 · Service Bulletin/Repair Instructions
      CID Split Screen Always Changes Back to Compass Display. After starting the vehicle, the Control Display (CID) right side (split screen) display does not stay on the last selection made by the driver. Within 30 seconds of starting the right side of the disp…
    • B270116 Jul 1, 2016 · Service Bulletin/Repair Instructions
      SERVICE ACTION: REPLACE THE DUST BOOT ON THE TRANSFER CASE. The dust boot (gaiter) for the front drive shaft at the transfer case may allow debris to enter the joint for the front driveshaft at the transfer case. The material of the dust boot may tear.
    • B121316 Jul 1, 2016 · Service Bulletin/Repair Instructions
      N63R Map Thermostat Faults This Service Information bulletin supersedes SI 12 13 16 dated May 2016. The Service Engine Soon light is on with one or more of the following fault codes: 1D2009 - characteristic map thermostat: clamped closed 10921B - characteri…
    • B841016 Oct 1, 2016 · Service Bulletin/Repair Instructions
      ROLLER SUNBLIND NOT ABLE TO BE CONTROLLED WITH BMW TOUCH COMMAND. BMW Touch Command operation of one of the side window roller sunblind's by itself is not possible without prior operation from the control button in that door panel. All other functions of th…
    • B652016 Oct 1, 2016 · Service Bulletin/Repair Instructions
      CID Split Screen Always Changes Back to Compass Display. This Service Information bulletin Replaces SI B65 20 16 dated June 2016. After starting the vehicle, the Control Display (CID) right side (split screen) display does not stay on the last selection mad…
    • B340916 Oct 1, 2016 · Service Bulletin/Repair Instructions
      "POWER LOSS: CCM 350. Vehicle seems to have no power. CCM 350: ""It is possible to continue to drive. All-wheel drive system."" displayed One of the following fault memory entries may be stored: DSC_G11: o D36500 - Message fault (xDrive actuator information…
    • B340116 Oct 1, 2016 · Service Bulletin/Repair Instructions
      "DYNAMIC STABILITY CONTROL (DSC) WARNING LAMP, LIGHTS UP This Service Information bulletin supersedes SI 34 01 16 dated February 2016. Various ""DSC warning lamps lights up in the instrument cluster, including the display: ""Suspension control system failed…
    • B320916 Oct 1, 2016 · Service Bulletin/Repair Instructions
      GROANING/CRACKING NOISE DURING STEERING. A significant cracking noise/groaning noise coming from the area of the steering shaft/steering column while steering. Steering shaft double cross joint.
    • B320516 Oct 1, 2016 · Service Bulletin/Repair Instructions
      Erroneous Electric Power Steering (EPS) Fault This Service Information bulletin supersedes SI 32 05 16 dated April 2016. INFORMATION This is an erroneous fault! After a terminal status change, the fault disappears until the next diagnostic session. Do not r…
    • B122416 Oct 1, 2016 · Service Bulletin/Repair Instructions
      "SERVICE ACTION: REWORKING THE PHEV SCREW CONNECTION OF THE COOLANT LINE ON ELECTRICAL MACHINE ELECTRONICS. The screw connection of the coolant lines to the electrical machine electronics (EME) may not have been properly tightened. AFFECTED VEHICLES Vehicle…
    • B840416 Sep 1, 2016 · Service Bulletin/Repair Instructions
      SOS MALFUNCTION DISPLAYED. An SOS malfunction is seen in the Kombi. When pressing the E-Call/SOS button in the overhead console, nothing happens. Fault code B7F33C (internal ECU error) is stored in the Telematics control unit (ATM/TCB2). There are 2 known c…
    • B661916 Sep 1, 2016 · Service Bulletin/Repair Instructions
      TRAFFIC JAM ASSISTANT BECOMES INOPERATIVE DURING USE. The Traffic Jam Assistant becomes inoperative while driving. Vibration actuator causes inadvertent contact between steering wheel trim and steering wheel, changing capacitance of steering wheel beyond ac…
    • B370116 Sep 1, 2016 · Service Bulletin/Repair Instructions
      VDP PROGRAMMING ABORTS. The system may abort while programming the Vertical Dynamic Platform (VDP) control unit. VDP control unit software
    • B612516 Dec 1, 2016 · Service Bulletin/Repair Instructions
      "DELIVERY STOP: PROGRAM CONTROL UNIT FOR OBD FAULT. There may be a software error in the DME (Digital Motor Electronics) and/or BDC (Body Domain Controller) which sets an OBD (On Board Diagnostic) fault entry and trigger the CEL (Check Engine Light) to be i…
    • B612416 Dec 1, 2016 · Service Bulletin/Repair Instructions
      "SME FAULT CODE 21F21F. The fault code (FC) ""21F21F - High-voltage system: Monitoring of insulation resistance deactivated due to fault of the safety box"" is stored in the battery management electronics (SME). The fault does not set any CCM's, is not perc…
    • B122716 Nov 1, 2016 · Service Bulletin/Repair Instructions
      "DIAGNOSING NON FUNCTIONING ""eDRIVE"". The customer complains that the vehicle will not go into ""eDrive"", and in some cases ""eDrive"" is greyed-out in the control display (CID) and is not selectable. Also, there are no pertinent electric drivetrain faul…
    • B661117 Sep 1, 2017 · Service Bulletin/Repair Instructions
      ACC (ACTIVE CRUISE CONTROL): CANNOT DELETE FAULT CODE 022126. ACC fault code 022126 does not delete from ACC control unit fault code memory. May occur in combination with under-voltage fault codes: * BDC 0x80402F - Battery deeply discharged * BE6: 0x801405 …
    • B650414 Sep 1, 2017 · Service Bulletin/Repair Instructions
      "AIRBAG WARNING LIGHT: ACSM FC 930A60 OR 930A1C SEAT OCCUPANCY DETECTION. According to the customer, the airbag warning light was on, but it may not be on when the vehicle arrives in the workshop. 1. ACSM fault code ""930A60 - Seat occupancy detection, fron…
    • B620717 Sep 1, 2017 · Service Bulletin/Repair Instructions
      INSTRUMENT CLUSTER REMAINS DARK & DOES NOT START UP This Service Information bulletin replaces SI B62 07 17 dated May 2017 What's New: Changed affected production dates & options Procedure wording Changed I-level of software. G12 (7 Series) G30 (5 Series…
    • B340517 Sep 1, 2017 · Service Bulletin/Repair Instructions
      TICKING NOISE WHILE CORNERING WITHOUT THE BRAKES APPLIED. Ticking noise coming from front wheel while cornering without brakes applied; noticeable at low speeds. Vehicle must be moving. Microscopic slippage of contact surface interface between inner brake d…
    • B240516 Sep 1, 2017 · Service Bulletin/Repair Instructions
      """TRANSMISSION OVERHEAT WARNING"" MESSAGE IS DISPLAYED. Check Control Message ""Transmission overheating warning"" is displayed. One or more of the following fault codes are stored in the transmission control unit (EGS): * 4209A1 - Temperature sensors: Hot…
    • B514516 Dec 1, 2016 · Service Bulletin/Repair Instructions
      SUNROOF NOISE WHILE DRIVING. Rattling noise from the vicinity of the overhead control center while driving, especially on rough roads. CAUSE Cowl-retaining rivet interfering with slide/tilt sunroof motor. Replace motor, if necessary.
    • B512216 Dec 1, 2016 · Service Bulletin/Repair Instructions
      SUNROOF REOPENS WHEN CLOSING FROM TILT POSITION This Service Information bulletin supersedes SI B51 22 16 dated August 2016.. Sunroof reopens when initiating automatic close from tilt position (momentary push) even though track is free of obstruction. Sunro…
    • B160516 Dec 1, 2016 · Service Bulletin/Repair Instructions
      G12 PHEV - FUEL LINE RATTLE NOISE. Customer reports rattling or humming noise coming from the rear area of the vehicle at engine speed range between 1,200-1,500 rpm. Interference between the fuel line quick connector and the side wall of a fuel tank.
    • B840214 Jun 1, 2017 · Service Bulletin/Repair Instructions
      ConnectedDrive/BMW Assist System Diagnosis Information This Service Information bulletin replaces SI B84 02 14 dated July 2014 What's New: Model - Removed models which no longer support BMW Assist functionality and added new models. Procedure - Add step r…
    • B620817 Jun 1, 2017 · Service Bulletin/Repair Instructions
      INSTRUMENT CLUSTER CANNOT BE PROGRAMMED. When programming the vehicle the instrument cluster fails to program. Missing software for instrument cluster.
    • B612817 Jun 1, 2017 · Service Bulletin/Repair Instructions
      "SME FAULT CODE 21F04B. One or several of the following check control messages (CCM) may be displayed: ""Engine fault! Power loss"" (CCM-ID: 29) ""Powertrain malfunction!"" (CCM-ID: 633) ""Hybrid system malfunctioning!"" (CCM-ID: 585) Note: The fault code 2…
    • B340517 Jun 1, 2017 · Service Bulletin/Repair Instructions
      TICKING NOISE WHILE CORNERING WITHOUT THE BRAKES APPLIED. Ticking noise coming from front wheel while cornering without brakes applied; noticeable at low speeds. Vehicle must be moving. Microscopic slippage of contact surface interface between inner brake d…
    • B621017 Aug 1, 2017 · Service Bulletin/Repair Instructions
      ERRONEOUS SERVICE INCLUSIVE CBS DISPLAY. After pre-delivery check or after instrument cluster exchange, BMW Service Inclusive is displayed although the vehicle does not feature the optional Service Inclusive coverage. Instrument Cluster display error
    • B613417 Aug 1, 2017 · Service Bulletin/Repair Instructions
      "SERVICE ACTION: PROGRAM CONTROL UNITS (GWS). After the engine start-up, gear (Drive or Reverse) cannot be selected. Message ""No drive position change possible"" is displayed in the CC display. Gear can be selected only after vehicle goes through the sleep…
    • B512717 Aug 1, 2017 · Service Bulletin/Repair Instructions
      REAR WINDOW ROLLER SUNBLIND DOES NOT DEPLOY. Rear roller sunblind will not deploy properly on one or both sides. Connection points to slider or roller are broken.
    • B170517 Aug 1, 2017 · Service Bulletin/Repair Instructions
      SERVICE ACTION: REPLACE THE MOUNT FOR THE TRANSMISSION OIL COOLER THERMOSTAT. There may be a rattling noise coming from the engine area at the transmission oil cooler thermostat or (on xDrive models only) the transmission oil cooler lines coming into contac…
    Source: NHTSA manufacturer communications files.