AutoStatsIQ
Data through Oct 2026
Model year

2012 Hino Conventional Models

Body and fuel not decoded. Owner complaints on file from no date to no date.

Recalls (0)Complaints (0)Investigations (0)Bulletins (126)
Recall campaigns covering this model year0No recall campaign lists this model year
Owner complaints0Not enough peers on file
Severity indexNoneCrash, fire, injury or death per 100
First 24 months0Complaints in its first two years
Complaints over time

Complaints about the 2012 Hino Conventional Models by year filed

Owner complaints about this model year, by the year they were filed with NHTSA.

No campaigns match these filters.Reset filters
Source: NHTSA ODI complaints file. The lighter column runs through October.
Components

Complaints by component

Owner complaints by component. Hover or focus a bar for the crash, fire, injury or death count.

No campaigns match these filters.Reset filters
Source: NHTSA ODI complaints file. A complaint can name more than one component; it is counted under the first.
Recalls

No recall campaign lists the 2012 Hino Conventional Models

Check a specific vehicle by VIN on NHTSA's site: a campaign may cover only part of a model year's production.

Source: NHTSA ODI recalls file.
Look up a VIN at NHTSA
Owner complaints

What owners reported about the 2012 Hino Conventional Models

The full text of every complaint filed with NHTSA about this model year, newest first. Complaints are filed by owners and are not verified by NHTSA; NHTSA removes personal details before publishing.

0 complaints on file.

    Source: NHTSA ODI complaints file.
    Investigations

    NHTSA has not opened an investigation on this model year

    Source: NHTSA ODI investigations file.
    All investigations
    Service bulletins

    126 manufacturer communications cover this model year

    Technical service bulletins and other notices the manufacturer sent to dealers. A bulletin is not a recall; the 60 most recent are listed.

    • 167-T2601-1 Dec 1, 2025 · Service Bulletin/Repair Instructions
      2011 – Current model year Hino Conventional and 2013 – 2020 model year Hino COE trucks equipped with reprogrammable control modules supported by the Hino Repro Server When reprograming a control module that is supported by the Hino Reprogramming server s…
    • 167-T2406-2 May 15, 2024 · Service Bulletin/Repair Instructions
      This article will provide dealership technicians with information on how to open a tech assist case and discuss what is required when opening a Tech Assist Case.
    • 167-T2406-1 May 17, 2024 · Service Bulletin/Repair Instructions
      After connecting to a truck using DX3, it may be necessary to review or create a DX Diagnostic Report for review.
    • 167-T2304-1 Apr 21, 2023 · Service Bulletin/Repair Instructions
      The purpose of this procedure is to provide instructions in how to properly record Nox Sensors using DX3
    • 167-W2301-3 Jan 18, 2023 · Service Bulletin/Repair Instructions
      CONVENTIONAL DIESEL PARTICULATE FILTER (DPF) – AASW0
    • 167-W2301-1 Jan 18, 2023 · Service Bulletin/Repair Instructions
      CONVENTIONAL NITROGEN OXIDE (NOX) SENSOR – AAPD0
    • 167-T2301-4 Jan 17, 2023 · Service Bulletin/Repair Instructions
      DX3 BURNER CONTROL UNIT (BCU) PROGRAMMING. TT-23-008
    • 167-B2212-2 Dec 22, 2022 · Service Bulletin/Repair Instructions
      2011MY-2021MY CONVENTIONAL EXTERIOR MIRROR STAY. The subject vehicle may experience an exterior mirror stay that is loose or drifts slightly from its position. An enhanced mirror stay, mirror stay mount, related fasteners and revised torque specifi…
    • 167-T2211-6 Nov 22, 2022 · Service Bulletin/Repair Instructions
      The purpose of this procedure is to provide instructions in how to properly record NOx sensors using DX3.
    • 167-T2211-5 Nov 22, 2022 · Service Bulletin/Repair Instructions
      The purpose of this procedure is to provide instructions in performing an injection quantity test on 2011 and newer Conventional or COE series trucks with DX3.
    • 167-T2211-3 Nov 10, 2022 · Service Bulletin/Repair Instructions
      The purpose of this procedure is to provide instructions in performing DCU programming on 2011 and newer Conventional or COE series trucks.
    • 167-T2211-1 Nov 22, 2022 · Service Bulletin/Repair Instructions
      The purpose of this procedure is to provide instructions in how to perform a burner regen recording on Conventional trucks equipped with a burner style exhaust system with DX3.
    • 167-B2206-1 Jun 8, 2022 · Service Bulletin/Repair Instructions
      CONVENTIONAL CAB STRUCTURE FRONT MOUNT REPAIR
    • 167-T2203-1 Mar 3, 2022 · Service Bulletin/Repair Instructions
      DIESEL NITROGEN OXIDE (NOX) SENSOR PART NUMBER CHANGE TECH TIP TT-22-004
    • 167-B2112-1 Dec 16, 2021 · Service Bulletin/Repair Instructions
      SB-21-002 CONVENTIONAL FUEL SENDER LEAK. Certain vehicles may exhibit fuel residue accumulation around the fuel level sensor or cover plate in certain conditions, including if the vehicle is equipped with dual fuel tanks. Updated fuel level sensor bo…
    • 167-E2105-1 Mar 24, 2021 · Service Bulletin/Repair Instructions
      Deterioration of the fuel regulator piston seals due to high concentrations of biofuels or poor fuels may cause fuel to leak from the burner atomizer in the after treatment system.
    • 167-E2103 Mar 24, 2021 · Service Bulletin/Repair Instructions
      WARRANTY ENHANCEMENT PROGRAM CONVENTIONAL BURNER ATOMIZER. Deterioration of the fuel regulator piston seals due to high concentrations of biofuels or poor fuels may cause fuel to leak from the burner atomizer in the after treatment system.
    • PA-2016-062 Jul 1, 2016 · Service Bulletin/Repair Instructions
      Revive slip cover set for National Seating Cush-N-Aire & 2000 Series Seats. Contains both back & seat cushion covers. Made specifically to fit National Seats with 18? to 21? wide backs & 18? to 23? wide cushions.
    • PA-2016-022 Feb 22, 2016 · Service Bulletin/Repair Instructions
      BOSTROM - LTSS (LIGHT TRUCK SUSPENSION SEAT) DESIGNED TO FIT THE HINO 155 & 195 COE ? Proven to reduce vibration to the occupant compared to the conventional static seat = LESS FATIGUE ? The suspension system can easily be adjusted to the weight of the dr…
    • PA-2016-002 Jan 19, 2016 · Service Bulletin/Repair Instructions
      Hino Trucks floor mats. Black durable rubber floor mats with the red Hino Trucks emblem. Easy to shake out the dirt and debris or clean it with soapy water.
    • Hino Conventiona Oct 12, 2016 · Service Bulletin/Repair Instructions
      Hino reference guide for Conventional, MY2011-2014
    • Hino COE MY2012+ Dec 1, 2016 · Service Bulletin/Repair Instructions
      Hino COE Quick Reference Guide
    • Floor Mats Flyer Dec 1, 2016 · Service Bulletin/Repair Instructions
      Floor mats sale for Hino Conventional (MY 2005-2017) & COE (My 2012-2017)
    • TT-14-033 Dec 5, 2014 · Service Bulletin/Repair Instructions
      When replacing an engine block with service part no., 11401E0380 there is potential that 2 rear oil passage plugs may be missing in the rear of the replacement engine block. In the event your replacement engine block does not have these 2 oil passage plugs,…
    • TT-14-032 Oct 31, 2014 · Service Bulletin/Repair Instructions
      During diagnosis of the exhaust aftertreatment system, the technician may find that the combustion chamber igniter plugs are covered in soot or appear to be excessively worn. If the igniters are dirty or have some wear, this alone does not justify replaceme…
    • TT-14-031 Feb 23, 2016 · Service Bulletin/Repair Instructions
      The tech tip below is to reset the speedometer after a tire size change or rear end gear change.
    • TT-14-030 Oct 16, 2014 · Service Bulletin/Repair Instructions
      The following procedure is for resetting the engine hour meter display showing total running time, driving time, and idling time of the vehicle in minutes and seconds. Total shows the time from engine start to engine stop. Drive or Idle shows the time of to…
    • TT-14-027 Aug 29, 2014 · Service Bulletin/Repair Instructions
      When replacing an audio unit for a CD player issue, the CD may not eject properly from the unit. DO NOT disassemble the audio unit to remove the CD. This will void any applicable warranty coverage for this repair. If the customer wishes to have the CD retur…
    • TT-14-026 Oct 31, 2014 · Service Bulletin/Repair Instructions
      When diagnosing a concern with the SCR system, the technician may notice crystallized DEF (diesel exhaust fluid) on the tip of the DEF injector. Crystallized DEF on the tip of the injector is a normal occurrence and does not indicate that the injector nozzl…
    • TT-14-020 Jul 30, 2014 · Service Bulletin/Repair Instructions
      The following information applies to the installation of a customer supplied and commercially available electric trailer brake controller for all 2012MY-2017 MY Hino trucks. This application only applies to brake controllers which operate using a 12-volt in…
    • TT-14-019 Jul 30, 2014 · Service Bulletin/Repair Instructions
      The following information applies to the installation of a customer supplied and commercially available electric trailer brake controller for all 2008MY-2015MY Hino trucks. This application only applies to brake controllers which operate using a 12-volt inp…
    • TT-14-017 Jun 27, 2014 · Service Bulletin/Repair Instructions
      Bendix® Air Dryer Service
    • TT-14-016 Jun 27, 2014 · Service Bulletin/Repair Instructions
      Exhaust Combustion Chamber with Loose Insulation
    • TT-14-015 Jun 27, 2014 · Service Bulletin/Repair Instructions
      DEF PUMP BACKFLOW CONNECTOR CHANGE
    • TT-14-013 Oct 28, 2015 · Service Bulletin/Repair Instructions
      Some customer?s may request to enable to Idle Shutdown to save on fuel costs and Idling time. The procedure below will detail how to enable the Idle Shutdown timer.
    • TT-14-011 Aug 13, 2014 · Service Bulletin/Repair Instructions
      The Burner Control Module (BCU) judges DTC?s P2441 (CAV Stuck), P2300 (Ignition Coil Failure) and P060C (BCU Temp Sensor Failure) on burner start up, if one of the fault conditions is met the BCU can go into a temporary stop mode. If this mode is entered, a…
    • TT-14-004 May 4, 2014 · Service Bulletin/Repair Instructions
      Exhaust Control Valve Adjustment Procedure
    • SB-15-014 Jan 30, 2015 · Service Bulletin/Repair Instructions
      CORRECTION OF WORKSHOP MANUAL FOR 2011MY-2014MY (ADDITION AND CORRECTION OF BURNER SYSTEM)
    • SB-14-029 Dec 3, 2014 · Service Bulletin/Repair Instructions
      CORRECTION OF WORKSHOP MANUAL FOR 2011 - 2015 MY (REVISION OF TROUBLESHOOTING PROCEDURE FOR THE DTC P2201 & P2214)
    • SB-14-028 Dec 2, 2014 · Service Bulletin/Repair Instructions
      The following is to inform you of the above caption. This service data should be attached to the relevant pages of the workshop manuals for maintenance and to use for servicing.
    • SB-14-020 Sep 22, 2014 · Service Bulletin/Repair Instructions
      When replacing a broken hood grille, an enhanced replacement hood grille is available. This procedure should be used when installing this enhanced grille to make certain that the hood grille is correctly installed.
    • SB-14-016 Sep 8, 2014 · Service Bulletin/Repair Instructions
      In the event that one of the subject vehicles is driven while the ABS warning lamp is illuminated, operation of the torque converter clutch will be suspended. Driving the vehicle with an ABS warning lamp illuminated can lead to overheating of the transmissi…
    • SB-14-014 Jul 25, 2014 · Service Bulletin/Repair Instructions
      Subject vehicles may exhibit a concern where manual regeneration does not complete within one hour of depressing the manual regeneration button. In these cases, there will be no indicators showing why manual regeneration will not complete. Check the burner …
    • SB-14-013 Jul 23, 2014 · Service Bulletin/Repair Instructions
      DPR damage, "Burner misfire due to excessive soot on the burner igniter surface", and "DPR push out" may occur due to the increase in the amount of soot in exhaust gas as a result of engine component degradation. In order to reduce the soot in exhaust gas u…
    • SB-14-010 Jul 10, 2014 · Service Bulletin/Repair Instructions
      Vehicles equipped with a factory installed, side mounted round fuel tank may exhibit a clogged fuel tank breather from dirt and road debris. A clogged button style breather may cause serious engine damage. In the event that a clogged button style breather i…
    • SB-14-005 Jun 19, 2014 · Service Bulletin/Repair Instructions
      The following procedure is for programming the keyless entry remote control(s) for trucks that are equipped with keyless entry system.
    • SB-14-003 Mar 28, 2014 · Service Bulletin/Repair Instructions
      The following is to inform you of the revision of the inspection procedure for the DTC?s P0340 and P0341. You are kindly requested to attach this service data to the relevant pages of the workshop manuals for maintenance and to use for servicing.
    • SA-14-026 Nov 4, 2014 · Service Bulletin/Repair Instructions
      The broken hood grille procedure (SB-14-020) has been revised to reuse the grille nuts (SZ17906009) if possible. There is a limited quantity of the nuts available and it has been confirmed that the nuts are reusable. The revised procedure has been posted on…
    • AA0M0 Oct 19, 2015 · Service Bulletin/Repair Instructions
      1) DPR System (Diesel Particulate Regeneration) manual regeneration may not complete; this occurs when the BCU temporally detects sticking of the CAV (Combustion Air Valve). This mis-detection will cause regeneration to be suspended. In order to avoid this …
    • TT-16-007 May 24, 2016 · Service Bulletin/Repair Instructions
      Hino Conventional Trucks 2013-17 model year COE Truck. The vehicle may exhibit a MIL lamp illuminated with DTC's P20DE, P2DF, P0087, or P016F, present in the engine ECU due to fuel system contamination. Fuel contalmination can be defined as the presence of …
    • TT-16-005 Mar 17, 2016 · Service Bulletin/Repair Instructions
      General - Brake switch low power diagnosis. Conventionnal Trucks or 2013 - 16 (155, 195) COE trucks. The purpose of the tech tip is to provide information for a low power concern possibly relating to the brake switch. Hino Trucks are equipped with two brake…
    • A-15-013 May 12, 2015 · Service Bulletin/Repair Instructions
      Conventional Air Horn Installation.
    • A-15-008 Jan 22, 2014 · Service Bulletin/Repair Instructions
      Diesel Particulate Reduction (DPR) Burner Fuel Filter Heater. A subject vehicle may experience DPR system related issues in ex treme cold weather conditions. If a good fuel quality is being used and persistent fuel gelling has been confirmed to be the cause…
    • SB-16-015 Jul 14, 2016 · Service Bulletin/Repair Instructions
      Conventional Trucks (238, 258, 268, or 338) If DTC (Diagnostic Trouble Code) P0611: Fuel Injector Driver Charge Circuit - circuit Low has set in the engine ECU (Electronic Control Unit) and the workshop manual diagnostic procedure has led to ECU replacement.
    • SB-15-045 Nov 19, 2015 · Service Bulletin/Repair Instructions
      Hino Conventional Trucks (238, 258, 268 or 338) equipped with a snow plow specification stationary grille. Fiberglass repair methods have been made available to address hood cra ck concerns. In the event a subject vehicle experiences cra cking of the hood n…
    • TT-15-030 Oct 13, 2015 · Service Bulletin/Repair Instructions
      Conventional with burner system, For trucks equipped with the burner system, certain environmental and unit applications have been foiund to cause unreliable operation of the system. Collected technical data indicates that decreasing the maintenance interva…
    • TT-15-027 Sep 16, 2015 · Service Bulletin/Repair Instructions
      2011-16 Hino Conventional trucks equipped with an Allison Transmission. The information contained to be outlines scenarios that may not account for all configura tions and should be utilized as a general guideline to assist in the integration of interfaces …
    • TT-15-026 Aug 18, 2015 · Service Bulletin/Repair Instructions
      Turbocharger Diagnoslis when an exhaust restrictioin is present. Conventional Trucks equipped with a J08 engine.
    • TT-15-025 Sep 10, 2015 · Service Bulletin/Repair Instructions
      DEF PUMP DIAGNOSTIC TIPS - HINO Conventional Trucks equipped with a J08 engine and 2013MY - 2016MY Hino COE Trucks equipped with a J05 engine.
    • TT-15-023 Sep 10, 2015 · Service Bulletin/Repair Instructions
      Hino Conventional Models. The Long Life Coolant and Extended Long Life coolant in Hino Conventional models differ greatly in formula and should never be mixed with other brands of coolant. The differences and information on both formulas will be explained.
    Source: NHTSA manufacturer communications files.
    About service bulletins