Model year

2015 Hino Conventional Models

Body and fuel not decoded. Owner complaints on file from no date to no date.

Recall campaigns covering this model year0No recall campaign lists this model year
Owner complaints0Not enough peers on file
Severity indexNoneCrash, fire, injury or death per 100
First 24 months0Complaints in its first two years
Complaints over time

Complaints about the 2015 Hino Conventional Models by year filed

Owner complaints about this model year, by the year they were filed with NHTSA.

No campaigns match these filters.Reset filters
Source: NHTSA ODI complaints file. The lighter column runs through October.
Components

Complaints by component

Owner complaints by component. Hover or focus a bar for the crash, fire, injury or death count.

No campaigns match these filters.Reset filters
Source: NHTSA ODI complaints file. A complaint can name more than one component; it is counted under the first.
Recalls

No recall campaign lists the 2015 Hino Conventional Models

Check a specific vehicle by VIN on NHTSA's site: a campaign may cover only part of a model year's production.

Source: NHTSA ODI recalls file.
Owner complaints

What owners reported about the 2015 Hino Conventional Models

The full text of every complaint filed with NHTSA about this model year, newest first. Complaints are filed by owners and are not verified by NHTSA; NHTSA removes personal details before publishing.

0 complaints on file.

    Source: NHTSA ODI complaints file.
    Investigations

    NHTSA has not opened an investigation on this model year

    Source: NHTSA ODI investigations file.
    Service bulletins

    124 manufacturer communications cover this model year

    Technical service bulletins and other notices the manufacturer sent to dealers. A bulletin is not a recall; the 60 most recent are listed.

    • 167-T2601-1 Dec 1, 2025 · Service Bulletin/Repair Instructions
      2011 – Current model year Hino Conventional and 2013 – 2020 model year Hino COE trucks equipped with reprogrammable control modules supported by the Hino Repro Server When reprograming a control module that is supported by the Hino Reprogramming server s…
    • 167-T2406-2 May 15, 2024 · Service Bulletin/Repair Instructions
      This article will provide dealership technicians with information on how to open a tech assist case and discuss what is required when opening a Tech Assist Case.
    • 167-T2406-1 May 17, 2024 · Service Bulletin/Repair Instructions
      After connecting to a truck using DX3, it may be necessary to review or create a DX Diagnostic Report for review.
    • 167-T2304-1 Apr 21, 2023 · Service Bulletin/Repair Instructions
      The purpose of this procedure is to provide instructions in how to properly record Nox Sensors using DX3
    • 167-W2301-3 Jan 18, 2023 · Service Bulletin/Repair Instructions
      CONVENTIONAL DIESEL PARTICULATE FILTER (DPF) – AASW0
    • 167-W2301-1 Jan 18, 2023 · Service Bulletin/Repair Instructions
      CONVENTIONAL NITROGEN OXIDE (NOX) SENSOR – AAPD0
    • 167-T2301-7 Jan 19, 2023 · Service Bulletin/Repair Instructions
      RECOVERING THE DOSER CONTROL UNIT (DCU) AFTER A FAILED PROGRAMMING EVENT – DCU BLANK. TT-23-011
    • 167-B2212-2 Dec 22, 2022 · Service Bulletin/Repair Instructions
      2011MY-2021MY CONVENTIONAL EXTERIOR MIRROR STAY. The subject vehicle may experience an exterior mirror stay that is loose or drifts slightly from its position. An enhanced mirror stay, mirror stay mount, related fasteners and revised torque specifi…
    • 167-T2211-6 Nov 22, 2022 · Service Bulletin/Repair Instructions
      The purpose of this procedure is to provide instructions in how to properly record NOx sensors using DX3.
    • 167-T2211-5 Nov 22, 2022 · Service Bulletin/Repair Instructions
      The purpose of this procedure is to provide instructions in performing an injection quantity test on 2011 and newer Conventional or COE series trucks with DX3.
    • 167-T2211-3 Nov 10, 2022 · Service Bulletin/Repair Instructions
      The purpose of this procedure is to provide instructions in performing DCU programming on 2011 and newer Conventional or COE series trucks.
    • 167-T2211-2 Nov 22, 2022 · Service Bulletin/Repair Instructions
      The purpose of this procedure is to provide instructions in how to perform a manual regen recording on Hino Trucks equipped with a 5th or 7th exhaust fuel injector with DX3.
    • 167-B2206-1 Jun 8, 2022 · Service Bulletin/Repair Instructions
      CONVENTIONAL CAB STRUCTURE FRONT MOUNT REPAIR
    • 167-W2205-3 May 4, 2022 · Service Bulletin/Repair Instructions
      CONVENTIONAL AFTER TURBO CATALYST (ATC) – AAPA0. WP-22-010
    • 167-T2203-1 Mar 3, 2022 · Service Bulletin/Repair Instructions
      DIESEL NITROGEN OXIDE (NOX) SENSOR PART NUMBER CHANGE TECH TIP TT-22-004
    • 167-B2112-1 Dec 16, 2021 · Service Bulletin/Repair Instructions
      SB-21-002 CONVENTIONAL FUEL SENDER LEAK. Certain vehicles may exhibit fuel residue accumulation around the fuel level sensor or cover plate in certain conditions, including if the vehicle is equipped with dual fuel tanks. Updated fuel level sensor bo…
    • PA-2016-062 Jul 1, 2016 · Service Bulletin/Repair Instructions
      Revive slip cover set for National Seating Cush-N-Aire & 2000 Series Seats. Contains both back & seat cushion covers. Made specifically to fit National Seats with 18? to 21? wide backs & 18? to 23? wide cushions.
    • PA-2016-022 Feb 22, 2016 · Service Bulletin/Repair Instructions
      BOSTROM - LTSS (LIGHT TRUCK SUSPENSION SEAT) DESIGNED TO FIT THE HINO 155 & 195 COE ? Proven to reduce vibration to the occupant compared to the conventional static seat = LESS FATIGUE ? The suspension system can easily be adjusted to the weight of the dr…
    • PA-2016-002 Jan 19, 2016 · Service Bulletin/Repair Instructions
      Hino Trucks floor mats. Black durable rubber floor mats with the red Hino Trucks emblem. Easy to shake out the dirt and debris or clean it with soapy water.
    • Hino Conventiona Oct 12, 2016 · Service Bulletin/Repair Instructions
      Hino reference guide for Conventional, MY2015-2017
    • Hino COE MY2012+ Dec 1, 2016 · Service Bulletin/Repair Instructions
      Hino COE Quick Reference Guide
    • Floor Mats Flyer Dec 1, 2016 · Service Bulletin/Repair Instructions
      Floor mats sale for Hino Conventional (MY 2005-2017) & COE (My 2012-2017)
    • TT-14-033 Dec 5, 2014 · Service Bulletin/Repair Instructions
      When replacing an engine block with service part no., 11401E0380 there is potential that 2 rear oil passage plugs may be missing in the rear of the replacement engine block. In the event your replacement engine block does not have these 2 oil passage plugs,…
    • TT-14-031 Feb 23, 2016 · Service Bulletin/Repair Instructions
      The tech tip below is to reset the speedometer after a tire size change or rear end gear change.
    • TT-14-030 Oct 16, 2014 · Service Bulletin/Repair Instructions
      The following procedure is for resetting the engine hour meter display showing total running time, driving time, and idling time of the vehicle in minutes and seconds. Total shows the time from engine start to engine stop. Drive or Idle shows the time of to…
    • TT-14-027 Aug 29, 2014 · Service Bulletin/Repair Instructions
      When replacing an audio unit for a CD player issue, the CD may not eject properly from the unit. DO NOT disassemble the audio unit to remove the CD. This will void any applicable warranty coverage for this repair. If the customer wishes to have the CD retur…
    • TT-14-026 Oct 31, 2014 · Service Bulletin/Repair Instructions
      When diagnosing a concern with the SCR system, the technician may notice crystallized DEF (diesel exhaust fluid) on the tip of the DEF injector. Crystallized DEF on the tip of the injector is a normal occurrence and does not indicate that the injector nozzl…
    • TT-14-023 Aug 6, 2014 · Service Bulletin/Repair Instructions
      Some 2013MY-2017MY COE units may illuminate the ABS light and store DTC C1425 after the aftermarket LED tail lamps are installed. In addition, the turn signals may flash quicker than normal and the cruise control will be disabled.
    • TT-14-020 Jul 30, 2014 · Service Bulletin/Repair Instructions
      The following information applies to the installation of a customer supplied and commercially available electric trailer brake controller for all 2012MY-2017 MY Hino trucks. This application only applies to brake controllers which operate using a 12-volt in…
    • TT-14-019 Jul 30, 2014 · Service Bulletin/Repair Instructions
      The following information applies to the installation of a customer supplied and commercially available electric trailer brake controller for all 2008MY-2015MY Hino trucks. This application only applies to brake controllers which operate using a 12-volt inp…
    • TT-14-017 Jun 27, 2014 · Service Bulletin/Repair Instructions
      Bendix® Air Dryer Service
    • TT-14-013 Oct 28, 2015 · Service Bulletin/Repair Instructions
      Some customer?s may request to enable to Idle Shutdown to save on fuel costs and Idling time. The procedure below will detail how to enable the Idle Shutdown timer.
    • SB-14-029 Dec 3, 2014 · Service Bulletin/Repair Instructions
      CORRECTION OF WORKSHOP MANUAL FOR 2011 - 2015 MY (REVISION OF TROUBLESHOOTING PROCEDURE FOR THE DTC P2201 & P2214)
    • SB-14-028 Dec 2, 2014 · Service Bulletin/Repair Instructions
      The following is to inform you of the above caption. This service data should be attached to the relevant pages of the workshop manuals for maintenance and to use for servicing.
    • SB-14-020 Sep 22, 2014 · Service Bulletin/Repair Instructions
      When replacing a broken hood grille, an enhanced replacement hood grille is available. This procedure should be used when installing this enhanced grille to make certain that the hood grille is correctly installed.
    • SB-14-012 Jul 15, 2014 · Service Bulletin/Repair Instructions
      A subject vehicle may exhibit an illuminated check engine lamp with DTC (Diagnostic Trouble Code) P0421 (Catalyst efficiency below threshold). The engine ECU may falsely detect an issue with the ATC (After Turbo Catalyst) with the current ECU software. If D…
    • SB-14-011 Jul 10, 2014 · Service Bulletin/Repair Instructions
      When viewing one of the subject vehicles from the front, while it is parked on level ground, the cab may appear to be leaning to the driver?s side. In the event that the cab is leaning to the driver?s side, a work procedure has been released to improve the …
    • SB-14-006 Mar 19, 2015 · Service Bulletin/Repair Instructions
      A subject vehicle may exhibit an illuminated Malfunction Indicator Lamp (MIL) on and a code P1604 stored in the Transmission Control Module.
    • SB-14-005 Jun 19, 2014 · Service Bulletin/Repair Instructions
      The following procedure is for programming the keyless entry remote control(s) for trucks that are equipped with keyless entry system.
    • SA-14-026 Nov 4, 2014 · Service Bulletin/Repair Instructions
      The broken hood grille procedure (SB-14-020) has been revised to reuse the grille nuts (SZ17906009) if possible. There is a limited quantity of the nuts available and it has been confirmed that the nuts are reusable. The revised procedure has been posted on…
    • SA-14-024 Oct 7, 2014 · Service Bulletin/Repair Instructions
      The DTC?s P2080 and P2084 and a MIL on, may be found on 15MY Conventional models. These diagnostic codes may be set due to a software detection anomaly that can occur under certain conditions. An ECU software update to address this condition has been released.
    • SA-14-021 Sep 23, 2020 · Service Bulletin/Repair Instructions
      This service bulletin involves inspecting the DEF injector area for coolant leakage, nozzle connectors, shield, lines and side fuel tank (if equipped) for potential damage prior to signing off when receiving Hino trucks. The areas pictured below have been s…
    • TT-16-007 May 24, 2016 · Service Bulletin/Repair Instructions
      Hino Conventional Trucks 2013-17 model year COE Truck. The vehicle may exhibit a MIL lamp illuminated with DTC's P20DE, P2DF, P0087, or P016F, present in the engine ECU due to fuel system contamination. Fuel contalmination can be defined as the presence of …
    • TT-16-005 Mar 17, 2016 · Service Bulletin/Repair Instructions
      General - Brake switch low power diagnosis. Conventionnal Trucks or 2013 - 16 (155, 195) COE trucks. The purpose of the tech tip is to provide information for a low power concern possibly relating to the brake switch. Hino Trucks are equipped with two brake…
    • SB-16-031 Nov 8, 2016 · Service Bulletin/Repair Instructions
      Service Manual Update - Correction of Workshop Manual for HINO300 Series Revision of Troubleshooting Procedure for the DTC P20DF.
    • SB-16-001 Jan 8, 2016 · Service Bulletin/Repair Instructions
      Correction of Workshop Manual for Hino COE correction of Clearance between the front leasf spring bracket pin and bushing - 155, 195, 155h, 195h. Correction of clearance betweeen the front leaff spring bracket pin and leaf spring bushing.
    • SCB-001-16 Oct 11, 2016 · Service Bulletin/Repair Instructions
      AA3A0 - EGR VALVE REPROGRAMMING - P14BF
    • RCB-004-16 Jul 12, 2016 · Service Bulletin/Repair Instructions
      Emissions Recall - PM Sensor & Engine ECU Software Enhancement, verify requires the work to be performed by referencing the vehicle by VIN within the Hino Warranty System (DCS) AA2N0
    • A-15-013 May 12, 2015 · Service Bulletin/Repair Instructions
      Conventional Air Horn Installation.
    • SB-16-008 May 3, 2016 · Service Bulletin/Repair Instructions
      COE Trucks (155, 155h, 195, or 195h) If DTC (Diagnostic Trouble Code) P0611: Fuel Injector Driver Charge Circuit - Circuit Low has set in the engine ECU (Electronic Control Unit) and the workshop manual diagnostic procedure has led to ECU replacement, an en…
    • SB-16-015 Jul 14, 2016 · Service Bulletin/Repair Instructions
      Conventional Trucks (238, 258, 268, or 338) If DTC (Diagnostic Trouble Code) P0611: Fuel Injector Driver Charge Circuit - circuit Low has set in the engine ECU (Electronic Control Unit) and the workshop manual diagnostic procedure has led to ECU replacement.
    • TT-15-027 Sep 16, 2015 · Service Bulletin/Repair Instructions
      2011-16 Hino Conventional trucks equipped with an Allison Transmission. The information contained to be outlines scenarios that may not account for all configura tions and should be utilized as a general guideline to assist in the integration of interfaces …
    • TT-15-026 Aug 18, 2015 · Service Bulletin/Repair Instructions
      Turbocharger Diagnoslis when an exhaust restrictioin is present. Conventional Trucks equipped with a J08 engine.
    • TT-15-025 Sep 10, 2015 · Service Bulletin/Repair Instructions
      DEF PUMP DIAGNOSTIC TIPS - HINO Conventional Trucks equipped with a J08 engine and 2013MY - 2016MY Hino COE Trucks equipped with a J05 engine.
    • TT-15-023 Sep 10, 2015 · Service Bulletin/Repair Instructions
      Hino Conventional Models. The Long Life Coolant and Extended Long Life coolant in Hino Conventional models differ greatly in formula and should never be mixed with other brands of coolant. The differences and information on both formulas will be explained.
    • TT-15-020 Jul 7, 2015 · Service Bulletin/Repair Instructions
      Year 2011-17 Injection quantity test. Supersedes TT-13-003 dated 06/21/2013
    • TT-15-019 Jun 10, 2015 · Service Bulletin/Repair Instructions
      All Hino Trucks, The following tech tip is to assist in removing the oil pan gasket when the oil pan is removed. Also, the use of surface conditioning discs to clean the engine block may cause severe engine damage.
    • TT-15-016 Jun 22, 2015 · Service Bulletin/Repair Instructions
      Chassis Posture Measurement Guideline & Specifications. The purpose of this publication is to communicate the standard measuring positions on the Hino chassis. In some cases, the customer may report a visual chassis posture concern where the chassis appears…
    • TT-15-014 Apr 22, 2015 · Service Bulletin/Repair Instructions
      2012-2015 COE Transmission DTC P0974 - P0986, may be found on, There could also be a complaint of low power and erratic shifting. These diagnostic codes may be set due to low voltage between the transmission case and the battery post.
    • TT-15-012 Apr 8, 2015 · Service Bulletin/Repair Instructions
      2005 through current model year trucks equipped with an Aisin transmission. When rekplacing an Ais in transmission, the below transmission return form is required to be filled out. Include this form with the warranty returned part.
    Source: NHTSA manufacturer communications files.