AutoStatsIQ
Data through Oct 2026
Model year

2017 Hino Conventional Models

Body and fuel not decoded. Owner complaints on file from no date to no date.

Recalls (0)Complaints (0)Investigations (0)Bulletins (87)
Recall campaigns covering this model year0No recall campaign lists this model year
Owner complaints0Not enough peers on file
Severity indexNoneCrash, fire, injury or death per 100
First 24 months0Complaints in its first two years
Complaints over time

Complaints about the 2017 Hino Conventional Models by year filed

Owner complaints about this model year, by the year they were filed with NHTSA.

No campaigns match these filters.Reset filters
Source: NHTSA ODI complaints file. The lighter column runs through October.
Components

Complaints by component

Owner complaints by component. Hover or focus a bar for the crash, fire, injury or death count.

No campaigns match these filters.Reset filters
Source: NHTSA ODI complaints file. A complaint can name more than one component; it is counted under the first.
Recalls

No recall campaign lists the 2017 Hino Conventional Models

Check a specific vehicle by VIN on NHTSA's site: a campaign may cover only part of a model year's production.

Source: NHTSA ODI recalls file.
Look up a VIN at NHTSA
Owner complaints

What owners reported about the 2017 Hino Conventional Models

The full text of every complaint filed with NHTSA about this model year, newest first. Complaints are filed by owners and are not verified by NHTSA; NHTSA removes personal details before publishing.

0 complaints on file.

    Source: NHTSA ODI complaints file.
    Investigations

    NHTSA has not opened an investigation on this model year

    Source: NHTSA ODI investigations file.
    All investigations
    Service bulletins

    87 manufacturer communications cover this model year

    Technical service bulletins and other notices the manufacturer sent to dealers. A bulletin is not a recall; the 60 most recent are listed.

    • 167-T2601-1 Dec 1, 2025 · Service Bulletin/Repair Instructions
      2011 – Current model year Hino Conventional and 2013 – 2020 model year Hino COE trucks equipped with reprogrammable control modules supported by the Hino Repro Server When reprograming a control module that is supported by the Hino Reprogramming server s…
    • 167-T2406-2 May 15, 2024 · Service Bulletin/Repair Instructions
      This article will provide dealership technicians with information on how to open a tech assist case and discuss what is required when opening a Tech Assist Case.
    • 167-T2406-1 May 17, 2024 · Service Bulletin/Repair Instructions
      After connecting to a truck using DX3, it may be necessary to review or create a DX Diagnostic Report for review.
    • 167-T2304-1 Apr 21, 2023 · Service Bulletin/Repair Instructions
      The purpose of this procedure is to provide instructions in how to properly record Nox Sensors using DX3
    • 167-W2301-3 Jan 18, 2023 · Service Bulletin/Repair Instructions
      CONVENTIONAL DIESEL PARTICULATE FILTER (DPF) – AASW0
    • 167-W2301-1 Jan 18, 2023 · Service Bulletin/Repair Instructions
      CONVENTIONAL NITROGEN OXIDE (NOX) SENSOR – AAPD0
    • 167-T2301-7 Jan 19, 2023 · Service Bulletin/Repair Instructions
      RECOVERING THE DOSER CONTROL UNIT (DCU) AFTER A FAILED PROGRAMMING EVENT – DCU BLANK. TT-23-011
    • 167-B2212-2 Dec 22, 2022 · Service Bulletin/Repair Instructions
      2011MY-2021MY CONVENTIONAL EXTERIOR MIRROR STAY. The subject vehicle may experience an exterior mirror stay that is loose or drifts slightly from its position. An enhanced mirror stay, mirror stay mount, related fasteners and revised torque specifi…
    • 167-T2211-6 Nov 22, 2022 · Service Bulletin/Repair Instructions
      The purpose of this procedure is to provide instructions in how to properly record NOx sensors using DX3.
    • 167-T2211-5 Nov 22, 2022 · Service Bulletin/Repair Instructions
      The purpose of this procedure is to provide instructions in performing an injection quantity test on 2011 and newer Conventional or COE series trucks with DX3.
    • 167-T2211-3 Nov 10, 2022 · Service Bulletin/Repair Instructions
      The purpose of this procedure is to provide instructions in performing DCU programming on 2011 and newer Conventional or COE series trucks.
    • 167-T2211-2 Nov 22, 2022 · Service Bulletin/Repair Instructions
      The purpose of this procedure is to provide instructions in how to perform a manual regen recording on Hino Trucks equipped with a 5th or 7th exhaust fuel injector with DX3.
    • 167-R2211-1 Nov 2, 2022 · Service Bulletin/Repair Instructions
      Certain 2017 ~ 2020 model year Hino Conventional vehicles were manufactured with a modified jumper harness between the Transmission Control Module (TCM) and vehicle chassis. The modified jumper harness may allow for potential water intrusion of the …
    • 167-P2211-1 Nov 15, 2022 · Service Bulletin/Repair Instructions
      This parts alert is to inform our dealers that when ordering part number 16400E0E62 passenger side radiator support, it will come with an extra bracket as shown below. When replacing the radiator support brackets, the new passenger side support can be…
    • 167-B2206-1 Jun 8, 2022 · Service Bulletin/Repair Instructions
      CONVENTIONAL CAB STRUCTURE FRONT MOUNT REPAIR
    • 167-W2205-3 May 4, 2022 · Service Bulletin/Repair Instructions
      CONVENTIONAL AFTER TURBO CATALYST (ATC) – AAPA0. WP-22-010
    • 167-W2205-1 May 4, 2022 · Service Bulletin/Repair Instructions
      CONVENTIONAL PARTICULATE SENSOR (PM) SENSOR – AAP60. WP-22-008
    • 167-B2112-1 Dec 16, 2021 · Service Bulletin/Repair Instructions
      SB-21-002 CONVENTIONAL FUEL SENDER LEAK. Certain vehicles may exhibit fuel residue accumulation around the fuel level sensor or cover plate in certain conditions, including if the vehicle is equipped with dual fuel tanks. Updated fuel level sensor bo…
    • PA-2016-062 Jul 1, 2016 · Service Bulletin/Repair Instructions
      Revive slip cover set for National Seating Cush-N-Aire & 2000 Series Seats. Contains both back & seat cushion covers. Made specifically to fit National Seats with 18? to 21? wide backs & 18? to 23? wide cushions.
    • PA-2016-022 Feb 22, 2016 · Service Bulletin/Repair Instructions
      BOSTROM - LTSS (LIGHT TRUCK SUSPENSION SEAT) DESIGNED TO FIT THE HINO 155 & 195 COE ? Proven to reduce vibration to the occupant compared to the conventional static seat = LESS FATIGUE ? The suspension system can easily be adjusted to the weight of the dr…
    • PA-2016-002 Jan 19, 2016 · Service Bulletin/Repair Instructions
      Hino Trucks floor mats. Black durable rubber floor mats with the red Hino Trucks emblem. Easy to shake out the dirt and debris or clean it with soapy water.
    • Hino Conventiona Oct 12, 2016 · Service Bulletin/Repair Instructions
      Hino reference guide for Conventional, MY2015-2017
    • Hino COE MY2012+ Dec 1, 2016 · Service Bulletin/Repair Instructions
      Hino COE Quick Reference Guide
    • Floor Mats Flyer Dec 1, 2016 · Service Bulletin/Repair Instructions
      Floor mats sale for Hino Conventional (MY 2005-2017) & COE (My 2012-2017)
    • TT-14-031 Feb 23, 2016 · Service Bulletin/Repair Instructions
      The tech tip below is to reset the speedometer after a tire size change or rear end gear change.
    • TT-14-023 Aug 6, 2014 · Service Bulletin/Repair Instructions
      Some 2013MY-2017MY COE units may illuminate the ABS light and store DTC C1425 after the aftermarket LED tail lamps are installed. In addition, the turn signals may flash quicker than normal and the cruise control will be disabled.
    • TT-14-020 Jul 30, 2014 · Service Bulletin/Repair Instructions
      The following information applies to the installation of a customer supplied and commercially available electric trailer brake controller for all 2012MY-2017 MY Hino trucks. This application only applies to brake controllers which operate using a 12-volt in…
    • TT-16-012 Oct 11, 2016 · Service Bulletin/Repair Instructions
      General - 2017 and earlier Conventional Trucks. The majority of alternators replaced for a battery or charging system concern are found to be free of defect. This Tech tip oulines the proper steps to diagnose a customer concern of a charging system issue
    • TT-16-011 Sep 20, 2016 · Service Bulletin/Repair Instructions
      Suspension - Leveling valve driveline vibration - 2017 and earlier Conventional Trucks equipped with a Hendrickson air suspension system. The vehicle may exhibit an intermittent driveline noise or vibration. The driver may report the condition to be more no…
    • TT-16-007 May 24, 2016 · Service Bulletin/Repair Instructions
      Hino Conventional Trucks 2013-17 model year COE Truck. The vehicle may exhibit a MIL lamp illuminated with DTC's P20DE, P2DF, P0087, or P016F, present in the engine ECU due to fuel system contamination. Fuel contalmination can be defined as the presence of …
    • SB-16-034 Nov 17, 2016 · Service Bulletin/Repair Instructions
      COE Hydroboost Reservoir fluid overflow or aeration - Trucks with hydraulic assist brake system. A subject vehicle may exhibit one or more of the following conditions: foaming/aeration of the hydraulic fluid in the hydroboost reservoir tank accompanied by n…
    • SB-16-019 Aug 2, 2016 · Service Bulletin/Repair Instructions
      Engine - Conventional Trucks (238, 258, 268, or 338) An enkhanced fuel cut valve is available to address a potential sticking condition that results in excess residual pressure in the dosing injector (7th injector) supply pipe. A sticking fuel cut valve may…
    • SB-16-009 Apr 11, 2016 · Service Bulletin/Repair Instructions
      2017 Conventional Trucks Correction of Workshop Manual for HINO Convention of the Electrical Wiring Diagram. (Service Manual Update)
    • SB-16-005 Mar 4, 2016 · Service Bulletin/Repair Instructions
      Correction of Workshop Manual for HINO600 Series Addition of Deta iled Explanation of the Fuel Pipe Installation.(Service Manual Update)
    • SB-16-001 Jan 8, 2016 · Service Bulletin/Repair Instructions
      Correction of Workshop Manual for Hino COE correction of Clearance between the front leasf spring bracket pin and bushing - 155, 195, 155h, 195h. Correction of clearance betweeen the front leaff spring bracket pin and leaf spring bushing.
    • SA-16-026 Oct 5, 2016 · Service Bulletin/Repair Instructions
      If a 2013 - 17 COE model 195h is encountered with a will not move in any gear condition and any combination of DTC'S P0706, P0756, P0761, P1604, please perform the following for engineering review.
    • SA-16-014 Jul 6, 2016 · Service Bulletin/Repair Instructions
      PM SENSOR RECALL SOFTWARE DELETE - The following service alert is to advise about the emissions recall AA2M0 or AA2N0 that were released 05/26/16. If they were performed at your dealership. The software (PMRepro.zip) that was downleaded to your laptop need…
    • SA-16-011 Jun 20, 2016 · Service Bulletin/Repair Instructions
      A software issue with the recently released recalls AA2M0 and AA2N0 has been discovered. The recall has been suspended pending further investigation. All VIN's have been turned off in the DCS system.
    • SB-16-012 Jun 28, 2016 · Service Bulletin/Repair Instructions
      Conventional Trucks (238, 258, 268, or 338) In the event that a subject vehicle exhibits a (MIL) malfunction indicator lamp and a P0300 (All injector Misfire) is stored in the engine ECU, enhanced ECU software is available to correct this concern/
    • SB-16-015 Jul 14, 2016 · Service Bulletin/Repair Instructions
      Conventional Trucks (238, 258, 268, or 338) If DTC (Diagnostic Trouble Code) P0611: Fuel Injector Driver Charge Circuit - circuit Low has set in the engine ECU (Electronic Control Unit) and the workshop manual diagnostic procedure has led to ECU replacement.
    • TT-15-020 Jul 7, 2015 · Service Bulletin/Repair Instructions
      Year 2011-17 Injection quantity test. Supersedes TT-13-003 dated 06/21/2013
    • TT-15-012 Apr 8, 2015 · Service Bulletin/Repair Instructions
      2005 through current model year trucks equipped with an Aisin transmission. When rekplacing an Ais in transmission, the below transmission return form is required to be filled out. Include this form with the warranty returned part.
    • PA-2011-31 Jan 22, 2016 · Service Bulletin/Repair Instructions
      Hino Trucks offers three Clarion radio options available for purchase which are detailed below.
    • SB-05-006 Sep 28, 2005 · Service Bulletin/Repair Instructions
      This document is to inform of the following information regarding the replacement and installation of the Aisin 450-43 LE Automatic Transmissions.
    • SB 05-004 Sep 28, 2005 · Service Bulletin/Repair Instructions
      This document is to inform of the procedure to calibrate the Pulse Adjust Module when needed (ex. tire size change, rear carrier ratio change) .
    • 167-R1909-01 Sep 10, 2019 · Service Bulletin/Repair Instructions
      CONVENTIONAL DCU AND ECU SOFTWARE ENHANCEMENT
    • 167-T1908-03 Aug 6, 2019 · Service Bulletin/Repair Instructions
      The following tech tip is to assist in replacing the engine fuel filter.
    • 167-T1908-01 Aug 1, 2019 · Service Bulletin/Repair Instructions
      The following tech tip is for fixing hard steering or power steering pump noise on a Hino Conventional truck.
    • 167-B1905-02 May 8, 2019 · Service Bulletin/Repair Instructions
      SB-19-003 AIR TANK CRACK
    • 167-B1904-02 Apr 10, 2019 · Service Bulletin/Repair Instructions
      SB-19-012 EXHAUST VALVE INSPECTION WORKSHOP MANUAL CORRECTION
    • 167-b1903-02 Mar 22, 2019 · Service Bulletin/Repair Instructions
      SB-19-009 P204B DTC WORKSHOP MANUAL CORRECTION. Workshop manual correction of Diagnostic Trouble Code (DTC) P204B.
    • 167-B1903-01 Mar 22, 2019 · Service Bulletin/Repair Instructions
      SB-19-008 P24FE DTC WORKSHOP MANUAL CORRECTION. Workshop manual correction of Diagnostic Trouble Code (DTC) P24FE.
    • 167-B1812-05 Dec 18, 2018 · Service Bulletin/Repair Instructions
      SB-18-036 COE DTCP24FE WORKSHOP MANUAL CORRECTION
    • 167-B1812-04 Dec 18, 2018 · Service Bulletin/Repair Instructions
      SB-18-035 CONVENTIONAL DTCP24FE WORKSHOP MANUAL CORRECTION
    • 167-B1812-03 Dec 18, 2018 · Service Bulletin/Repair Instructions
      SB-18-034 CONVENTIONAL UNIFICATION OF PART NUMBER WORKSHOP MANUAL CORRECTION
    • 167-B1811-01 Nov 1, 2018 · Service Bulletin/Repair Instructions
      SB-18-030 Air Spring Shield
    • 167-B1808-02 Aug 31, 2018 · Service Bulletin/Repair Instructions
      SA-18-018 HINO XL SERIES PARTS AND SERVICE SUPPORT
    • 167-B1802-02 Jan 4, 2018 · Service Bulletin/Repair Instructions
      A subject vehicle may experience a reoccurring complaint where excessive diesel fuel residue develops around the fuel level sender and/or auxiliary hole plug on factory installed single or dual fuel tank configurations. An enhanced gasket, bolts and updated…
    • 167-B1802-01 Jan 3, 2018 · Service Bulletin/Repair Instructions
      The subject vehicle may experience low power and/or an uncommanded stop lamp illumination. An enhanced brake pedal return sping is available to maintain the brake pedal static position. This procedure provides direction for installation of the brake pedal…
    • 167-T1701-12 Oct 31, 2017 · Service Bulletin/Repair Instructions
      TT-17-017 The P0500 typically sets due to a short or sensor concern. Since the speed is sent to the meter then to the ECU, suspect a concern between the meter and engine ECU. If so, unplug the radio and see if the concern changes. A speed wire was added to …
    Source: NHTSA manufacturer communications files.
    About service bulletins