Filter on, saved
  • Manufacturer Zhaoqing Junhong (not used on this page)×
Major brands, 2015 onClear all
Model year

2025 Honda CRF1100

Motorcycle, gasoline, built in Japan. Owner complaints on file from Apr 14, 2026 to Aug 29, 2026.

Recall campaigns covering this model year313k vehicles or units across those campaigns
Owner complaints44.0 times the median 2025 motorcycle
Severity index0.02025 motorcycles average 11.5
First 24 months4Complaints in its first two years
Complaints over time

Complaints about the 2025 Honda CRF1100 by year filed

Owner complaints about this model year, by the year they were filed with NHTSA.

0123420264
Source: NHTSA ODI complaints file. The lighter column runs through October.
Components

75% of complaints about the 2025 Honda CRF1100 name brakes

Owner complaints by component. Hover or focus a bar for the crash, fire, injury or death count.

Brakes
3
Electrical system
1
Source: NHTSA ODI complaints file. A complaint can name more than one component; it is counted under the first.
Recalls

3 recall campaigns cover the 2025 Honda CRF1100

Check a specific vehicle by VIN on NHTSA's site: a campaign may cover only part of a model year's production.

Recall campaigns for the 2025 Honda CRF1100
CampaignFiledSubjectComponentVehiclesRemedy
25V-583Sep 5, 2025Left handlebar switch harness may corrode due to oxidation, resulting in the loss of horn function or the ability to switch the headlight from low…Electrical system7,492Part replacement
25V-358May 29, 2025Crankcase sealing bolt may have been improperly manufactured, which can cause the engine to leak oil onto the rear tireEngine and cooling1,016Part replacement
24V-882Nov 21, 2024Software error in the fuel injection electronic control unit (FI-ECU) may cause an engine stall or a loss of power when the Wheelie Control…Electrical system4,205Software update
Source: NHTSA ODI recalls file.
Owner complaints

What owners reported about the 2025 Honda CRF1100

The full text of every complaint filed with NHTSA about this model year, newest first. Complaints are filed by owners and are not verified by NHTSA; NHTSA removes personal details before publishing.

4 complaints on file, page 1 of 1.

  1. Filed Aug 29, 2026Failure Aug 20, 2026Chula Vista, CAService brakes

    I own a 2025 Honda Africa Twin 1100 DCT with approximately 7,300 miles. The rear brake pads became completely worn down to the metal pad-wear indicator clips. According to maintenance personnel at MotorWorld in El Cajon, CA, the root cause was the rear brake caliper failing to retract to its original position after braking. This caused the pads to remain pressed against the rotor while riding, continuously wearing down the pads and rotor. The pads were eventually ground down to the clips, causing severe metal-on-metal contact, grinding, and extremely loud brake squealing. The issue occurred approximately 1.5 weeks ago. There were no warning lights, warning messages, or electronic warnings indicating excessive brake wear or a potentially dangerous condition. This created a significant safety hazard and resulted in multiple near-miss situations. The motorcycle’s braking performance was severely affected, and my braking distance increased by approximately three times the normal distance. The motorcycle was inspected and repaired by MotorWorld in El Cajon, CA. Separately, the maintenance manager at Del Amo Motorsports in Chula Vista, CA, stated that it is “very rare that rear brakes go out before the front, ESPECIALLY at 7,300 miles.” I can provide photographs, dealership documentation, and the removed brake components for inspection. The original dealership also reported the issue to Honda. I believe this is a serious safety concern because the rear brake caliper failed to retract properly, causing severe premature brake and rotor wear without warning. The resulting loss of braking performance substantially increased stopping distance and created multiple near misses. A similar unexpected failure could significantly increase the risk of a crash, serious injury, or death.

    NHTSA complaint 11760639
  2. Filed Aug 29, 2026Failure Aug 20, 2026Chula Vista, CAService brakes

    I own a 2025 Honda Africa Twin 1100 DCT with approximately 7,300 miles. The rear brake pads became completely worn down to the metal pad-wear indicator clips. The rear brake caliper was pushing the brake pads into the brake rotor/disc, resulting in severe metal-on-metal grinding and extremely loud brake squealing. The issue occurred approximately one and a half weeks ago. There were no warning lights, warning messages, or other electronic warnings indicating that the rear brakes were experiencing excessive wear or a potentially dangerous condition. The condition created a significant safety hazard and resulted in multiple near-miss situations. The motorcycle’s braking performance was severely affected, and I experienced an increase in braking distance of approximately three times the normal distance. The motorcycle was inspected and repaired by a Honda dealership in El Cajon, California. The maintenance manager at Del Amo Motorsports in Chula Vista, California, stated that it is “very rare that rear brakes go out before the front, ESPECIALLY at 7,300 miles.” The removed brake components may be available for inspection. I can also provide photographs and documentation from the dealership that performed the repair. The original dealership also reported the issue to Honda. I believe this condition presents a serious safety concern because the rear brake system experienced severe premature wear and loss of braking performance at very low mileage without any warning light or electronic warning to the rider. A similar failure occurring unexpectedly could substantially increase stopping distance and the risk of a crash, serious injury, or death

    NHTSA complaint 11760619
  3. Filed Aug 29, 2026Failure Aug 20, 2026Chula Vista, CAService brakes

    I own a 2025 Honda Africa Twin 1100 DCT with approximately 7,300 miles. The rear brake pads became completely worn down to the metal pad-wear indicator clips. The rear brake caliper was pushing the brake pads into the brake rotor/disc, resulting in severe metal-on-metal grinding and extremely loud brake squealing. The issue occurred approximately one and a half weeks ago. There were no warning lights, warning messages, or other electronic warnings indicating that the rear brakes were experiencing excessive wear or a potentially dangerous condition. The condition created a significant safety hazard and resulted in multiple near-miss situations. The motorcycle’s braking performance was severely affected, and I experienced an increase in braking distance of approximately three times the normal distance. The motorcycle was inspected and repaired by a Honda dealership in El Cajon, California. The maintenance manager at Del Amo Motorsports in Chula Vista, California, stated that it is “very rare that rear brakes go out before the front, ESPECIALLY at 7,300 miles.” The removed brake components may be available for inspection. I can also provide photographs and documentation from the dealership that performed the repair. The original dealership also reported the issue to Honda. I believe this condition presents a serious safety concern because the rear brake system experienced severe premature wear and loss of braking performance at very low mileage without any warning light or electronic warning to the rider. A similar failure occurring unexpectedly could substantially increase stopping distance and the risk of a crash, serious injury, or death

    NHTSA complaint 11760618
  4. Filed Apr 14, 2026Failure Mar 24, 20266,000 milesTequesta, FLElectrical system

    The contact owns a 2025 Honda CRF1100 Motorcycle. The contact received notification of NHTSA Campaign Number: 25V583000 (Electrical System); however, the part to do the recall repair was not yet available. The local dealer was contacted, but the motorcycle was not repaired. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact stated that the horn, turn signals, and the high and low beam headlights were inoperable. The failure mileage was 6,000.

    NHTSA complaint 11731237
Source: NHTSA ODI complaints file.
Investigations

NHTSA has not opened an investigation on this model year

Source: NHTSA ODI investigations file.
Service bulletins

No manufacturer communications on file

Technical service bulletins and other notices the manufacturer sent to dealers. A bulletin is not a recall.

Source: NHTSA manufacturer communications files.