Model year

2026 Mazda CX-50

SUV, hybrid, 4WD/4-Wheel Drive/4x4, built in United States. Owner complaints on file from Mar 31, 2026 to Sep 21, 2026.

Recall campaigns covering this model year0No recall campaign lists this model year
Owner complaints132.2 times the median 2026 suv
Severity index7.72026 suvs average 10.9
First 24 monthsOpenWindow has not closed yet
Complaints over time

Complaints about the 2026 Mazda CX-50 by year filed

Owner complaints about this model year, by the year they were filed with NHTSA.

051015202613
Source: NHTSA ODI complaints file. The lighter column runs through October.
Components

23% of complaints about the 2026 Mazda CX-50 name driver assistance

Owner complaints by component. Hover or focus a bar for the crash, fire, injury or death count.

Driver assistance
3
Powertrain
3
Airbags
2
Engine and cooling
2
Suspension
2
Back-over prevention
1
Electrical system
1
Fuel system
1
Seat belts
1
Steering
1
Source: NHTSA ODI complaints file. A complaint can name more than one component; it is counted under the first.
Recalls

No recall campaign lists the 2026 Mazda CX-50

Check a specific vehicle by VIN on NHTSA's site: a campaign may cover only part of a model year's production.

Source: NHTSA ODI recalls file.
Owner complaints

What owners reported about the 2026 Mazda CX-50

The full text of every complaint filed with NHTSA about this model year, newest first. Complaints are filed by owners and are not verified by NHTSA; NHTSA removes personal details before publishing.

13 complaints on file, page 1 of 1.

  1. Filed Sep 21, 2026Failure Aug 28, 2026Modesto, CAEngine, Fuel/propulsion system, Unknown or other

    I own a brand-new 2026 Mazda CX-50 Hybrid that is currently under the manufacturer's warranty. I am reporting an intermittent failure of the vehicle to respond normally to a selected driving direction. During the first incident on August 28, 2026, I had shifted the vehicle into Reverse. The vehicle indicated that Reverse was selected, but when I pressed the accelerator, the vehicle did not move or respond as expected. I attempted to change the selected driving direction, but the vehicle was not responding normally to the shift commands.l, again responding as if it were in neutral. I was unable to get the vehicle to operate normally until I turned the vehicle completely off, waited, and restarted it. After restarting, the vehicle began responding normally and was able to engage and move as expected. I captured the first incident on video. The video shows the vehicle's behavior during the event. The same issue occurred again on Sept21, 2026. Again, the vehicle did not respond normally to the selected driving direction and accelerator input. I had to turn the vehicle off and restart it before normal operation returned. This concerns me because the vehicle is intermittently failing to respond and move as commanded. The fact that normal operation returns after the vehicle is shut off and restarted makes the problem particularly difficult to reproduce, but it has now occurred more than once. I have reported the issue to my Mazda dealership and am requesting that the vehicle be inspected and diagnosed under warranty. I have also identified other NHTSA owner complaints involving 2025 and 2026 Mazda CX-50/CX-50 Hybrid vehicles describing similar symptoms, including failure to engage a selected direction, unexpected movement in the opposite direction, lack of vehicle response, and normal operation returning after the vehicle is shut off and restarted.

    NHTSA complaint 11765952
  2. Filed Aug 3, 2026Failure May 15, 2026Simi Valley, CAPower train

    On several occasions, moving the gear selector from Reverse to Drive, the transmission has failed to engage Drive, with the dashboard displaying "D" and the vehicle moving in reverse upon throttle application. Fortunately, objects, pets or pedestrians were not present behind the vehicle during the occurrences. The dealership was unable to duplicate the condition and found no software updates or other notices from Mazda addressing the issue.

    NHTSA complaint 11754509
  3. Filed Jul 24, 2026Failure Jul 16, 2026Charleston, SCPower train, Vehicle speed control

    I parked this hybrid rental vehicle on a steep street facing uphill and remained in the car with it on for about 15 to 30 minutes. When I put the vehicle back in Drive, released the brake pedal, and pressed the gas pedal to drive away, the car quickly free-rolled backwards. There was no throttle response, and I had to quickly brake to stop the car from its quick backwards descent. Multiple attempts to correct the issue, including various combinations of placing the car back in Park and back in Drive, engaging the electronic parking brake, etc., had no effect. There was no throttle response at all when in Drive, and no ability to control the free-roll of the car after pressing the gas pedal when in Drive without braking. I even tried placing the car in Reverse, and this allowed me to go backwards at a controlled speed instead of free-rolling, but Drive only initiated an uncontrollable backward free-roll. Note that the hybrid vehicle was on, but the engine did not sound like it was running, and I believe it was in electric mode while experiencing this issue. There were no warning lamps, messages, or other symptoms of problems prior to or during the issue. Over the course of these various attempts I rolled backwards several car lengths. Had there been a vehicle or person behind me, there would have been an accident. I eventually placed the car in Park and turned it off and left it there. When I returned about 2 hours later the vehicle behaved as normal, and the issue was never experienced again while I had the rental car. Since this was a Budget rental car, they would need to be contacted about any availability for inspection. I did not report the issue to Budget or to Mazda. This issue concerned me enough to report it directly to NHTSA.

    NHTSA complaint 11752755
  4. Filed Jul 21, 2026Failure Jul 12, 20263,506 milesAlamogordo, NMSuspension

    The contact's daughter owns a 2026 Mazda CX-50. The contact stated that while his daughter was driving 40 MPH and decelerating to turn into a parking lot, the front passenger’s side wheel detached and fell in underneath the vehicle. The vehicle was towed to a tow yard and was then towed to the dealer. The dealer stated that the failure was due to a crash and informed the owner that the repair was not covered under warranty; however, the contact stated that a Police Officer confirmed that there was no damage to the curb or in the vicinity of the vehicle during the failure. No diagnostic information was available. Upon inspection by an insurance adjuster, it was determined that the repair would be covered by the insurance company and would be performed using aftermarket parts. The parts were unavailable, and the vehicle was not repaired. The manufacturer was notified of the failure and assisted in locating a dealer. The failure mileage was approximately 3,506.

    NHTSA complaint 11751784
  5. Filed Jul 14, 2026Failure Jul 14, 2026Brooklyn Center, MNAutomatic emergency braking, Warnings

    Was braking with traffic and all of a sudden the emergency braking kicked on and brought the car to a stop from about 40 miles per hour with no immediate threat of collision. Brakes were being applied manually and had plenty of room infront of the vehicle and traffic was not stopped. Nearly caused the vehicle behind to collide into me. Very uncomfortable whiplash feeling experienced and my unsecured belongings in my car went flying.

    NHTSA complaint 11750218
  6. Filed Jul 8, 2026Failure Jul 3, 2026Lexington, KYAir bagsCrash2 injured

    Component: Air Bags – Knee Airbag / Trim Panel During a collision, on July 3rd with the Mazda CX‑50, the knee airbag deployed and a hard plastic trim panel from the lower dashboard was forcibly ejected. This panel struck my knee and caused a laceration across my kneecap. The injury was not caused by the crash itself but directly by the detached interior component. The trim panel appears to be part of the knee‑airbag assembly and should not detach with enough force or sharpness to cause bodily harm. I experience pain, discomfort, and ongoing issues due to the injury with tingling down my left leg when I get up to walk. I am concerned this represents a design or manufacturing defect in the knee‑airbag trim panel or its breakaway mechanism. Photos of the deployed airbag, the detached part, and the injury are available.

    NHTSA complaint 11749114
  7. Filed Jul 6, 2026Failure Jul 4, 2026Lincoln, NEAir bags, Seat belts

    This report concerns the design of the front seat belt reminder system, which I believe creates a safety hazard. The audible warning begins the instant the engine starts — while the vehicle is stationary in Park — is very loud, and repeats indefinitely until the belt is latched. Federal Standard No. 208 requires only a short warning (up to 8 seconds); this immediate, persistent chime is a voluntary design choice. Other manufacturers (e.g., Honda) meet the same standard while chiming only once the vehicle is in motion, which is sufficient and far less intrusive. The safety problem: because the warning is so aggravating, owners are defeating their own seat belt systems. Owners across the Mazda lineup — CX-5, CX-30, CX-50, CX-90, Mazda3, and Mazda6 — publicly document this on owner forums ([XXX], [XXX], [XXX], [XXX], [XXX], [XXX]) and in TikTok and YouTube tutorials. Common methods include cutting or de-pinning the buckle-latch wire so the car always reads as belted, and installing uncertified seat belt extenders or dummy buckles. The buckle-latch signal feeds the airbag/SRS control module and affects airbag and pretensioner deployment, so these workarounds degrade crash protection. NHTSA's own research notes that reminders annoying enough to be circumvented reduce seat belt use. Mazda has acknowledged the excessive chime volume in Technical Service Bulletin 09-002-24. The system operates as designed — the design itself is the hazard. Symptom: continuous chime and belt warning light at startup while in Park; vehicle available for inspection on request. I request that NHTSA review whether this reminder design induces unsafe circumvention and should be revised. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)

    NHTSA complaint 11748544
  8. Filed Jul 5, 2026Failure Jul 4, 2026Durham, NCUnknown or other

    I was backing out of a parking spot in a parking lot that backed up to a 2 lane highway. I placed the car in Reverse and then put the car in Drive, so that I could exit the parking lot to a side road. When I placed the car in Drive and pressed gas, the car went into Reverse (towards the 2 lane highway behind me). I placed the car in park, then back to Drive, it went in Reverse again. We were now in the 2 lane highway with oncoming traffic swerving to avoid us. We decided to put the car in park and turn off the car. Then, we restarted and place the car in Drive. It went into drive and we moved forward into the parking lot, off the highway and then we could exit the parking lot and drive home.

    NHTSA complaint 11748332
  9. Filed Jun 21, 2026Failure Jun 19, 2026Wetumpka, ALEngine

    At approximately 2,900 miles, during the first oil change/service, the factory-installed spin-on oil filter could not be removed normally. The oil filter required approximately one hour of removal effort and would not spin off in a normal manner. When the filter was finally removed, the oil filter threaded adapter/union came out of the engine-side oil filter housing while still seized inside the oil filter. The adapter threads showed visible damage, including flattened, galled, and torn thread areas. The oil filter was seized tightly enough to the adapter that the oil filter had to be cut away from the adapter to separate the parts. The adapter was removed from the filter without adding further damage. The damaged adapter threads were cleaned/chased only as a temporary repair because the vehicle was needed for work and parts were not immediately available over the weekend. A new correct replacement oil filter was test-fitted to the adapter. It threaded fully onto the adapter by hand but had slight binding in the previously damaged thread area. The filter was installed, the engine was started, and the assembly was checked for leaks. No leak was observed during the temporary service check. However, the adapter remains damaged and should be replaced. This appears to be a manufacturing, assembly, or original filter installation issue, because the vehicle had only approximately 2,900 miles and the factory-installed oil filter was seized to the oil filter threaded union. The filter should not be seized to the adapter at this mileage, and the threaded adapter should not be pulled out of the engine-side housing during normal oil filter removal. The concern is that a damaged or improperly threaded oil filter adapter could cause oil filter sealing failure, oil leakage, loss of engine oil pressure, engine damage, or an oil leak onto the roadway. The damaged threaded oil filter adapter/union should be documented as a factory/dealer assembly defect.

    NHTSA complaint 11745430
  10. Filed Jun 12, 2026Failure Dec 2, 2025Raymore, MOElectrical system, Power train, Steering

    We are having concerning issue with Mazda CX 50, 2026 hybrid. not going into reverse gear or stopping unexpectedly after attempting to shift to reverse. We recently took the vehicle to the Mazda dealership where we bought it.: Luther Mazda in [XXX]. After repeated attempts, they said they had no way to address the problem since they couldn’t re-create it. We reiterated that it just happened several times to us, but we cannot re-create it on demand. I sent the dealership the following information from the Internet, that was posted about the 2025 model having the same issue as our new 2026 is having. Factory Transmission Software Mode     •    Recall Numbers: NHTSA ID 25V487000 (approx.) early production CX-50 Hybrid units were shipped to dealerships with their software accidentally locked in a specialized "factory testing mode". [1 ([XXX])]     •    Safety Impact: When trapped in this mode, a driver can shift the vehicle directly into Drive or Reverse without depressing the brake pedal, which violates federal safety standards and poses a roll-away or sudden acceleration risk. [     •    The Remedy: Dealers must replace the Engine Control Module (ECM), reprogram the Power Control Unit (PCU) and Hybrid Control Unit (HCU), and use a proprietary diagnostic tool to formally deactivate the factory mode at no cost. [1 ([XXX])] We sent our dealer list, but they still say they cannot do anything for now to resolve the situation with our 2026 model. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)

    NHTSA complaint 11743687
  11. Filed Jun 4, 2026Failure May 30, 2026Wynantskill, NYWarnings, Automatic emergency braking, Blind spot detection

    I am reporting a severe safety defect on a brand-new Mazda CX-50 Turbo Premium Plus involving a complete failure and malfunction of the Advanced Driver Assistance Systems (ADAS), specifically the proximity, forward collision, parking collision, and automatic emergency braking sensors. The safety sensors continuously malfunction, creating an immediate and erratic hazard while driving. The chief concern is the risk of uncommanded, sudden automatic emergency braking at highway speeds, or the complete failure of critical safety warning systems during a real collision event.Upon identifying this safety risk, I contacted an authorized Mazda dealer to arrange an emergency repair. The dealership explicitly promised a loaner vehicle so they could hold my car safely for diagnostic testing. However, when I arrived, the dealership reneged on the loaner vehicle and refused to check the car into service.Instead, dealership sales and service personnel drove my vehicle into the service bay and instructed me to get inside the cabin. A staff member then entered the vehicle settings menu and manually muted the auditory safety alerts to conceal the active sensor malfunction warnings. I immediately protested, stating that muting a critical ADAS safety warning system was unsafe, did not diagnose or repair the defect, and put my life and public safety at risk. Despite my clear objections, the dealership's management instructed me that I must continue to drive the vehicle with the disabled/muted safety systems anyway and to bring it back if anything else happens.When I refused to accept this hazardous vehicle modification and sought alternative resolution, the dealership owner issued a written communication banning me from the property, entirely refusing to honor the manufacturer's warranty or perform mandatory safety repairs. The vehicle remains unrepaired and unsafe to operate on public roads due to random sensor failures, and the primary local dealer has outright refused service.

    NHTSA complaint 11742213
  12. Filed May 20, 2026Failure May 20, 2026Holly Springs, NCSuspension

    Gradually increasing knocking and clicking sounds from front end suspension through first 400 miles of new car miles was observed. Researched this issue and found known recall for this specific problem for same model/year but VIN was not identified within the known range. Reported to dealer/mazda service center and told to bring vehicle in for inspection with reported confidence that this is the same known problem.

    NHTSA complaint 11739067
  13. Filed Mar 31, 2026Failure Mar 31, 2026San Diego, CAAutomatic emergency braking

    I was pulling into a parking spot and the emergency braking system applied the brakes very forcefully as if a collision was imminent. I backed up and saw nothing in the parking spot and then proceeded to pull back into the same spot with no issue. There was a loud and rhythmic thumping sound that I perceived as the abs system engaging. This is a rental car so I am returning it to the company, National rental car, and swapping out for a new vehicle. I contacted Mazda about this and was given a case # 00434431.

    NHTSA complaint 11728337
Source: NHTSA ODI complaints file.
Investigations

NHTSA has not opened an investigation on this model year

Source: NHTSA ODI investigations file.
Service bulletins

70 manufacturer communications cover this model year

Technical service bulletins and other notices the manufacturer sent to dealers. A bulletin is not a recall; the 60 most recent are listed.

  • SA-042-26a Sep 17, 2026 · Service Bulletin/Repair Instructions
    Mazda Connected Services - Frequently Asked Questions (FAQ) This Service Alert supersedes the previously issued SAs listed below. The changes are noted in Red text. SA-042/26 06/30/26 DESCRIPTION Frequently Asked Questions (FAQ) Index General Questions MA…
  • SA-041-26a Sep 11, 2026 · Service Bulletin/Repair Instructions
    DESCRIPTION If you encounter any type of electrical concern (e.g, dead battery, engine no start, DTC(s) stored...), interview the customer before proceeding with normal MGSS diagnosis by asking if any aftermarket devices have been installed. Aftermarket dev…
  • DRW60 Warr b Sep 25, 2026 · Service Campaign
    Subject: Notification of Dealer Re-Work (DRW60) – 2026MY CX-50 and CX-50 Hybrid - Rear Door Glass Holder Detach Issue Dear Mazda Dealer Colleagues, Mazda Motor Corporation has decided to conduct a Dealer Re-Work on certain 2026MY CX-50 and CX-50 Hybrid vehi…
  • SA-038-26b Sep 10, 2026 · Service Bulletin/Repair Instructions
    This Service Alert supersedes the previously issued service alert listed below. The changes are noted in Red text. SA-038/26 08/18/26 and 06/15/26 DESCRIPTION Some customers may complain about any of the following: 1. Infotainment Center Display does not pr…
  • SA-012-26d Sep 18, 2026 · Service Bulletin/Repair Instructions
    DESCRIPTION Some customers may experience a message "TCU Malfunction. Have the Vehicle Inspected" in the instrument cluster. Additional symptoms that may occur: Connected Vehicle One Time Passcode (OTP) may fail. Connected Vehicle Remote functions may fail…
  • SA-039-26a Aug 19, 2026 · Service Bulletin/Repair Instructions
    This Service Alert supersedes the previously issued SA(s) listed below. The changes are noted in Red text. SA-039/26 06/15/26 Mazda Connect Symptom Troubleshooting DESCRIPTION Customers having MAZDA CONNECT concerns should have their vehicle repaired using …
  • SA-038-26a Sep 4, 2026 · Service Bulletin/Repair Instructions
    This Service Alert supersedes the previously issued service alert listed below. The changes are noted in Red text. SA-038/26 06/15/26 DESCRIPTION Some customers may complain about any of the following: 1. Infotainment Center Display does not provide the Au…
  • SA-012-26c Aug 7, 2026 · Service Bulletin/Repair Instructions
    This Service Alert supersedes the previously issued SA(s) listed below. The changes are noted in Red. SA-012/26 04/17/26, 03/04/26 and 02/26/2026 DESCRIPTION Some customers may experience a message "TCU Malfunction. Have the Vehicle Inspected" in the instr…
  • SA-053-26 Aug 19, 2026 · Service Bulletin/Repair Instructions
    This Service Alert supersedes the previously issued bulletin(s) listed below. The changes are noted in Red text. SA-006/23 01/23/23 DESCRIPTION Some customers may complain about the infotainment system and/or the MyMazda App showing incorrect clock and/or…
  • SA-050-26 Aug 7, 2026 · Service Bulletin/Repair Instructions
    DESCRIPTION Some vehicles may continue to display the recall notification "IMPORTANT NOTICE. VIEW VEHICLE STATUS MONITOR FOR DETAILS" on the center display even after the recall has been completed. NOTE: Once the warranty claim for the recall campaign is ap…
  • DRW60 Warr Aug 12, 2026 · Other
    Subject: Notification of Dealer Re-Work (DRW60) – 2026MY CX-50 and CX-50 Hybrid - Rear Door Glass Holder Detach Issue Dear Mazda Dealer Colleagues, Mazda Motor Corporation has decided to conduct a Dealer Re-Work on certain 2026MY CX-50 and CX-50 Hybrid vehi…
  • DRW60 Repair a Aug 19, 2026 · Service Campaign
    Subject: Notification of Dealer Re-Work (DRW60) – 2026MY CX-50 and CX-50 Hybrid - Rear Door Glass Holder Detach Issue Dear Mazda Dealer Colleagues, Mazda Motor Corporation has decided to conduct a Dealer Re-Work on certain 2026MY CX-50 and CX-50 Hybrid vehi…
  • DRW60 Repair Aug 12, 2026 · Service Campaign
    Subject: Notification of Dealer Re-Work (DRW60) – 2026MY CX-50 and CX-50 Hybrid - Rear Door Glass Holder Detach Issue Dear Mazda Dealer Colleagues, Mazda Motor Corporation has decided to conduct a Dealer Re-Work on certain 2026MY CX-50 and CX-50 Hybrid vehi…
  • DRW60 Dlr Ltr Aug 12, 2026 · Service Campaign
    Subject: Notification of Dealer Re-Work (DRW60) – 2026MY CX-50 and CX-50 Hybrid - Rear Door Glass Holder Detach Issue Dear Mazda Dealer Colleagues, Mazda Motor Corporation has decided to conduct a Dealer Re-Work on certain 2026MY CX-50 and CX-50 Hybrid vehi…
  • SA-043-26 Jul 2, 2026 · Service Bulletin/Repair Instructions
    This SA supersedes the previously issued SA(s) listed below. The changes are noted in Red. SA-063/24 09/06/24 DESCRIPTION The Blind Spot Monitoring (BSM) system can malfunction with the following symptoms if the rear side radar sensors are installed facing …
  • SA-0-38/26 Jun 16, 2026 · Service Bulletin/Repair Instructions
    DESCRIPTION Some customers may complain about any of the following: 1. Infotainment Center Display does not provide the Authorization Code (OTP) during the MyMazda App Connected Vehicle enrollment. 2. Remote function(s) inoperative. Engine Start / Stop Doo…
  • SA-028-26a Jun 30, 2026 · Service Bulletin/Repair Instructions
    DESCRIPTION Some vehicles may exhibit a clicking, popping, tapping or knocking noise from the front end when turning left or right and accelerating. NOTE: The noise could occur at different steering wheel angles or power levels. Due to the insulating prope…
  • SA-042-26 Jul 1, 2026 · Service Bulletin/Repair Instructions
    This Service Alert supersedes the previously issued SAs listed below. The changes are noted in Red text. SA-017/25 12/16/25, 09/08/25, 07/14/25, 05/15/25 and 03/21/25 DESCRIPTION Mazda Connect Frequently Asked Questions (FAQ) Index General Questions MAZDA C…
  • SA-041-26 Jun 19, 2026 · Service Bulletin/Repair Instructions
    This SA supersedes the previously issued SA(s) listed below. The changes are noted in Red. SA-061/25 12/17/25 DESCRIPTION If you encounter any type of electrical concern (e.g, dead battery, engine no start, DTC(s) stored...), interview the customer before p…
  • SA-040-26 Jun 16, 2026 · Service Bulletin/Repair Instructions
    This Service Alert supersedes the previously issued SA(s) listed below. The changes are noted in Red. SA-009/25 08/22/25 and 02/18/25 DESCRIPTION Some customers may experience a Connected Vehicle failure. The MyMazda App may display an Error Code. This docu…
  • SA-039-26 Jun 16, 2026 · Service Bulletin/Repair Instructions
    This Service Alert supersedes the previously issued SA listed below. The changes are noted in Red text. SA-012/25 10/06/25, 08/21/25, 05/15/25 and 02/27/25 DESCRIPTION Customers having MAZDA CONNECT concerns should have their vehicle repaired using the foll…
  • SA-027-26a Jun 17, 2026 · Service Bulletin/Repair Instructions
    This SA supersedes the previously issued bulletin(s) listed below. The changes are noted below in Red. SA-027/26 04/16/26 DESCRIPTION The Mazda DCA-8000 is required for all warranty battery testing. If the Mazda DCA-8000 is not used, incorrect battery testi…
  • 16-010-26 Jul 1, 2026 · Service Bulletin/Repair Instructions
    COMPLIANCE WITH NEW YORK STATE GENERAL BUSINESS LAW §399‑CCCCC (CONNECTED VEHICLE SERVICE; DOMESTIC VIOLENCE VICTIMS) DESCRIPTION This Service Information is issued in accordance with New York State General Business Law §399􀀀CCCCC (Connected Vehicle Servic…
  • 16-001-26a Jun 30, 2026 · Service Bulletin/Repair Instructions
    UPDATED SOFTWARE RELEASE FOR CONCERNS WITH MAZDA CONNECT INFOTAINMENT SYSTEM This bulletin supersedes the previously issued bulletin(s) listed below. The changes are noted in Red. 16-001/26 01/08/26 DESCRIPTION The release notes outlined below provide an o…
  • SA-034-26 May 19, 2026 · Service Bulletin/Repair Instructions
    This service alert supersedes the previously issued service alert listed below. The changes are noted in Red text. SA-047/25 10/07/25 DESCRIPTION When the Telematics Control Unit (TCU) replacement is necessary due to a failure, use MDARS to activate the new…
  • SA-033-26 Jun 4, 2026 · Service Bulletin/Repair Instructions
    This SA supersedes the previously issued SA(s) listed below. The changes are noted below in Red. SA-029/25 10/16/25 and 06/02/25 DESCRIPTION This service information provides testing and charging procedures in order to promote proper battery maintenance, to…
  • SA-032-26 May 2, 2026 · Service Bulletin/Repair Instructions
    This SA supersedes the previously issued SA(s) listed below. The changes are noted in Red. SA-011/25 10/16/25 and 02/27/25 DESCRIPTION Some customers will report that their fuel door (AKA, fuel filler door, fuel lid, and fuel-filler lid) was stuck closed an…
  • SA-031-26 Apr 30, 2026 · Service Bulletin/Repair Instructions
    DESCRIPTION Some vehicles may require the replacement of a damaged VIN plate or vehicle certification label. To obtain a replacement VIN plate (bulkhead-mounted and visible through the lower-left area of the windshield), contact DAG (Dealer Assistance Group…
  • SA-029-26 Apr 21, 2026 · Service Bulletin/Repair Instructions
    This Service Alert supersedes the previously issued SA listed below: The changes are noted in Red. SA-011/24 02/12/24, 06/06/24, 07/29/24 DESCRIPTION Mazda has developed factory recommended scheduled maintenance services that support all major vehicle syste…
  • SA-027-26 Apr 15, 2026 · Service Bulletin/Repair Instructions
    This SA supersedes the previously issued bulletin(s) listed below. The changes are noted below in Red. SA-007/25 10/22/25, 06/02/25 and 02/03/25 DESCRIPTION The Mazda DCA-8000 is required for all warranty battery testing. If the Mazda DCA-8000 is not used, …
  • SA-026-26 Apr 16, 2026 · Service Bulletin/Repair Instructions
    This Service Alert supersedes the previously issued M-Tip(s) listed below. The changes are noted in Red text. MT-002/19 09/30/19 and 12/19/19 DESCRIPTION If an engine assembly is replaced after a catastrophic internal mechanical failure, clean the intake ma…
  • SA-021-26 Apr 4, 2026 · Service Bulletin/Repair Instructions
    This Service Alert supersedes the previously issued SAs and bulletin(s) listed below: The changes are noted below in red. SA-010/23 02/09/23 DESCRIPTION Some customers may experience one or more electrical malfunctions after a vehicle body repair. A newly p…
  • SA-028-26 Apr 17, 2026 · Service Bulletin/Repair Instructions
    DESCRIPTION Some vehicles may exhibit a clicking, popping, tapping or knocking noise from the front when turning left or right and accelerating. NOTE: The noise could occur at different steering wheel angles or power levels. Due to the insulating properties…
  • SA-012-26b Apr 18, 2026 · Service Bulletin/Repair Instructions
    Some customers may experience a message "TCU Malfunction. Have the Vehicle Inspected" in the instrument cluster. Additional symptoms that may occur: Connected Vehicle One Time Passcode (OTP) may fail. • Connected Vehicle Remote functions may fail. • The fol…
  • SA-008-26a Apr 21, 2026 · Service Bulletin/Repair Instructions
    During PDI, an indentation in the rear bumper may be noticed, or in some cases, the customer may return after delivery to report the indentation. Follow the steps below to repair the concern. REPAIR PROCEDURE Check the rear bumper for an indentation. Repair…
  • 09-014-26 Apr 30, 2026 · Service Bulletin/Repair Instructions
    Some vehicles may experience intermittent battery discharge. This may be caused by improperly installed door boots allowing water to enter into the central connectors C-22/C-23 (located near the A-pillar at the base of the left and right front doors), leadi…
  • SA-014-26 Mar 11, 2026 · Service Bulletin/Repair Instructions
    This Service Alert supersedes the previously issued SA(s) and TSB(s) listed below: The changes are noted in Red. SA-035/24 05/31/24 DESCRIPTION There is a concern that some water pumps are being replaced that are not faulty, due to signs of a very small coo…
  • SA-012-26a Mar 4, 2026 · Service Bulletin/Repair Instructions
    This Service Alert supersedes the previously issued SA(s) listed below. The changes are noted in Red. SA-012/26 02/26/2026 DESCRIPTION Some customers may experience a message "TCU Malfunction. Have the Vehicle Inspected" in the instrument cluster. Addition…
  • SA-012-26 Feb 27, 2026 · Service Bulletin/Repair Instructions
    This Service Alert supersedes the previously issued SA(s) listed below. The changes are noted in Red. SA-060/25 12/16/25 Some customers may experience a message "TCU Malfunction. Have the Vehicle Inspected" in the instrument cluster. Additional symptoms tha…
  • SA-008-26 Feb 21, 2026 · Service Bulletin/Repair Instructions
    This SA supersedes the previously issued SA(s) listed below. The changes are noted in Red. SA-041/25 10/31/25 and 09/10/25 During PDI, an indentation in the rear bumper may be noticed, or in some cases, the customer may return after delivery to report the i…
  • SA-005-26 Jan 26, 2026 · Service Bulletin/Repair Instructions
    There are currently 2 methods for cutting a new auxiliary key blank. A. Auxiliary Key Trace Cut Method • B. Auxiliary Key Code Cut Method 2019 and newer models require a 10-digit key code to accurately cut keys • 5-digit codes CANNOT be provided for 2019 an…
  • SA-004-26 Jan 20, 2026 · Service Bulletin/Repair Instructions
    Some customers may complain that a door beltline molding is loose, fell off, or is missing.
  • SA-002-26 Jan 6, 2026 · Service Bulletin/Repair Instructions
    Some customers may complain that the tire sidewalls are distorted or "damaged". Sidewall waviness/indentations/undulations are common on radial tires and are more noticeable on tires with taller sidewalls. The higher the tire pressure, the more noticeable t…
  • SA-001-26 Jan 5, 2026 · Service Bulletin/Repair Instructions
    Some customers may report an odor or water in the HVAC system and upon inspection, the cabin air filter may be found to be wet.
  • 09-004-26 Jan 13, 2026 · Service Bulletin/Repair Instructions
    Some vehicles may exhibit a crack in the door side of the front seat cushion trim. Cracks develop along the areas where wrinkles form when weight is applied to the seat. When exiting the vehicle, the door-side surface of the cushion trim may be folded and c…
  • 09-001-26 Jan 7, 2026 · Service Bulletin/Repair Instructions
    There are wrinkles on the leather seat cushion and/or seat back surface at PDI, when new vehicle is delivered, or when new upholstery is installed under Warranty repair. NOTE: This repair is not a permanent fix, it is meant to make new seats look their best…
  • SA-061-25 Dec 17, 2025 · Service Bulletin/Repair Instructions
    If you encounter any type of electrical concern (e.g, dead battery, engine no start, DTC(s) stored...), interview the customer before proceeding with normal MGSS diagnosis by asking if any aftermarket devices have been installed. Aftermarket devices may be …
  • SA-023-25c Dec 16, 2025 · Service Bulletin/Repair Instructions
    Some customers may complain about any of the following: 1. Infotainment Center Display does not provide the Authorization Code (OTP) during the MyMazda App Connected Vehicle enrollment. 2. Remote function(s) inoperative. Engine Start / Stop • Door Lock / Un…
  • SA-060-25 Dec 17, 2025 · Service Bulletin/Repair Instructions
    Some customers may experience a message "TCU Malfunction. Have the Vehicle Inspected" in the instrument cluster. The following DTC's may be stored: B1252:87-8B:TCU - COMMUNICATION ERROR WITH CONNECTIVITY MASTER UNIT (CMU) • U0198:00-03:CMU - COMMUNICATION E…
  • SA-017-25d Dec 17, 2025 · Service Bulletin/Repair Instructions
    Mazda Connect Services - Frequently Asked Questions (FAQ)
  • SA-056-25 Nov 27, 2025 · Service Bulletin/Repair Instructions
    When inspected, the differential or PTO oil is dark or black. This is considered normal and NO repair should be performed. During production, differential ring and pinion gears receive a manganese phosphate coating (commonly referred to as black oxide). Thi…
  • SA-055-25 Nov 26, 2025 · Service Bulletin/Repair Instructions
    Some vehicles exhibit brake related concerns such as brake noise, brake judder or brake dragging. If you encounter a customer complaint for any one of these symptoms, refer to the following information to understand why symptoms may occur, and to better ass…
  • SA-052-25 Nov 6, 2025 · Service Bulletin/Repair Instructions
    Some customer's might state that they notice fluid or oil leaking/dripping on the ground when the vehicle is parked. For this concern, inspect the vehicle for any trace of a fluid or oil leak and use the following examples as a guide to determine if it is s…
  • SA-051-25 Nov 8, 2025 · Service Bulletin/Repair Instructions
    Noise, Vibration, and Harshness (NVH) Diagnostic Guidelines Diagnostic Guidelines When diagnosing NVH concerns, it is essential to first classify the issue into one of three primary categories: Noise, Vibration, or Harshness. Many customer complaints may in…
  • SA-020-25a Nov 19, 2025 · Service Bulletin/Repair Instructions
    There have been warranty claims submitted for growling or bearing whine noise in differentials, transfer units and transmissions where the source of the noise was a wheel bearing. This misdiagnosis can lead to multiple repair attempts, warranty debits, and …
  • 09-010-25b Nov 8, 2025 · Service Bulletin/Repair Instructions
    Some customers may complain about a rattle from the sunroof (panorama roof) area. Make sure to read the complete repair procedure before attempting any repairs as the sunroof may have rattles from more than one location. The rattle noise may be caused by: L…
  • SA-047-25 Oct 8, 2025 · Service Bulletin/Repair Instructions
    When the Telematics Control Unit (TCU) replacement is necessary due to a failure, use MDARS to activate the new TCU after replacement. Use the information in this service alert to initialize the new TCU until the procedure on MGSS is updated.
  • SA-044-25 Oct 2, 2025 · Service Bulletin/Repair Instructions
    For improvement of electrical diagnosis, the SKYACTIV® Wiring Terminal Test Kits has been delivered all the dealers. The terminal test kit enables you: To check pin fit drag of all PCM terminals used in SKYACTIV® vehicles and compare suspect terminal drag w…
  • SA-029-25a Oct 17, 2025 · Service Bulletin/Repair Instructions
    This service information provides testing and charging procedures in order to promote proper battery maintenance, to deliver new vehicles with fully charged batteries, and to reduce unnecessary battery replacement cost. For new vehicles in stock at the deal…
  • SA-012-25c Oct 7, 2025 · Service Bulletin/Repair Instructions
    Customers having MAZDA CONNECT concerns should have their vehicle repaired using the following repair procedure.
Source: NHTSA manufacturer communications files.