Model year

2011 Mcneilus Rear Loader

Body and fuel not decoded. Owner complaints on file from no date to no date.

Recall campaigns covering this model year1431 vehicles or units across those campaigns
Owner complaints0Not enough peers on file
Severity indexNoneCrash, fire, injury or death per 100
First 24 months0Complaints in its first two years
Complaints over time

Complaints about the 2011 Mcneilus Rear Loader by year filed

Owner complaints about this model year, by the year they were filed with NHTSA.

No campaigns match these filters.Reset filters
Source: NHTSA ODI complaints file. The lighter column runs through October.
Components

Complaints by component

Owner complaints by component. Hover or focus a bar for the crash, fire, injury or death count.

No campaigns match these filters.Reset filters
Source: NHTSA ODI complaints file. A complaint can name more than one component; it is counted under the first.
Recalls

One recall campaign covers the 2011 Mcneilus Rear Loader

Check a specific vehicle by VIN on NHTSA's site: a campaign may cover only part of a model year's production.

Recall campaigns for the 2011 Mcneilus Rear Loader
CampaignFiledSubjectComponentVehiclesRemedy
24V-766Oct 15, 2024License plate light was installed in the wrong location and may not fully illuminate the license plateLighting431Repair or modification
Source: NHTSA ODI recalls file.
Owner complaints

What owners reported about the 2011 Mcneilus Rear Loader

The full text of every complaint filed with NHTSA about this model year, newest first. Complaints are filed by owners and are not verified by NHTSA; NHTSA removes personal details before publishing.

0 complaints on file.

    Source: NHTSA ODI complaints file.
    Investigations

    NHTSA has not opened an investigation on this model year

    Source: NHTSA ODI investigations file.
    Service bulletins

    9 manufacturer communications cover this model year

    Technical service bulletins and other notices the manufacturer sent to dealers. A bulletin is not a recall.

    • REL-IB-027 Apr 27, 2026 · Other
      McNeilus Truck and Manufacturing provides these instructions for replacing hardware on the front ejector shoes of a Rear Loader refuse vehicle in order to create greater clearance between the hardware and the ejector track. The potential clearance issue i…
    • MISC-IB-084-A Feb 26, 2026 · Service Bulletin/Repair Instructions
      McNeilus Truck and Manufacturing requires an inspection and replacement, if needed, to ensure the Bob Tail® Huck® bolts are fully swaged with correct thread exposure on the rear pivot cross member body mounts. Revision A updates the replacement bolt leng…
    • MISC-IB-084 Feb 4, 2026 · Service Bulletin/Repair Instructions
      McNeilus Truck and Manufacturing requires an inspection and replacement, if needed, to ensure the Bob Tail® Huck® bolts are fully swaged with correct thread exposure on the rear pivot cross member body mounts.
    • MISC-TSIB-081 Mar 14, 2024 · Service Bulletin/Repair Instructions
      According to an amended ruling in the visual inspection labeling requirement in Federal Motor Vehicle Safety Standard (FMVSS) No. 304, the periodic inspection interval for compressed natural gas (CNG) fuel containers has been modified to “at least every 1…
    • MISC-TSIB-081 Mar 14, 2023 · Service Bulletin/Repair Instructions
      According to an amended ruling in the visual inspection labeling requirement in Federal Motor Vehicle Safety Standard (FMVSS) No. 304, the periodic inspection interval for compressed natural gas (CNG) fuel containers has been modified to “at least every 1…
    • MISC-TSIB-079 Sep 27, 2022 · Service Bulletin/Repair Instructions
      McNeilus Truck and Manufacturing provides these instructions for installing a hydraulic reservoir cork gasket. The installation of this gasket will repair leaks coming from the gasket between the in-tank filter and the reservoir.
    • REL-TSIB-024 Aug 31, 2022 · Service Bulletin/Repair Instructions
      If you are experiencing repeated failures of the main pressure tube (PN 1137938 or PN 1597692) at or near the welded saddle port and have replaced the tube, McNeilus Truck and Manufacturing offers these instructions for an alternate option to help reduce …
    • MISC-TSIB-078 Nov 2, 2021 · Service Bulletin/Repair Instructions
      McNeilus Truck and Manufacturing offers these instructions for ejector cylinder bypass testing.
    • MISC-TSIB-073 Sep 27, 2017 · Service Bulletin/Repair Instructions
      This technical service information bulletin lists instructions to replace the hydraulic vane pumps on McNeilus front and rear loading refuse collection trucks with a longer life hydraulic pump. The hydraulic pump powers vehicle body functions for refuse col…
    Source: NHTSA manufacturer communications files.