AutoStatsIQ
Data through Oct 2026
Model year

2013 Mcneilus Zero Radius

Body and fuel not decoded. Owner complaints on file from no date to no date.

Recalls (1)Complaints (0)Investigations (0)Bulletins (18)
Recall campaigns covering this model year1330 vehicles or units across those campaigns
Owner complaints0Not enough peers on file
Severity indexNoneCrash, fire, injury or death per 100
First 24 months0Complaints in its first two years
Complaints over time

Complaints about the 2013 Mcneilus Zero Radius by year filed

Owner complaints about this model year, by the year they were filed with NHTSA.

No campaigns match these filters.Reset filters
Source: NHTSA ODI complaints file. The lighter column runs through October.
Components

Complaints by component

Owner complaints by component. Hover or focus a bar for the crash, fire, injury or death count.

No campaigns match these filters.Reset filters
Source: NHTSA ODI complaints file. A complaint can name more than one component; it is counted under the first.
Recalls

One recall campaign covers the 2013 Mcneilus Zero Radius

Check a specific vehicle by VIN on NHTSA's site: a campaign may cover only part of a model year's production.

Recall campaigns for the 2013 Mcneilus Zero Radius
CampaignFiledSubjectComponentVehiclesRemedy
19V-656Sep 17, 2019Vehicles are powered with compressed natural gas (CNG) and are equipped with pressure relief devices (PRD) that may not function as designed,…Fuel system330Part replacement
Source: NHTSA ODI recalls file.
Look up a VIN at NHTSA
Owner complaints

What owners reported about the 2013 Mcneilus Zero Radius

The full text of every complaint filed with NHTSA about this model year, newest first. Complaints are filed by owners and are not verified by NHTSA; NHTSA removes personal details before publishing.

0 complaints on file.

    Source: NHTSA ODI complaints file.
    Investigations

    NHTSA has not opened an investigation on this model year

    Source: NHTSA ODI investigations file.
    All investigations
    Service bulletins

    18 manufacturer communications cover this model year

    Technical service bulletins and other notices the manufacturer sent to dealers. A bulletin is not a recall.

    • ZR-IB-018-C Jul 8, 2026 · Service Bulletin/Repair Instructions
      McNeilus Truck and Manufacturing, Inc. offers these instructions for the Zero Radius (ZR) 3.0 speed limiter software update. This document covers some configurations. Revision C updates one step on a Mack diesel version chassis.
    • MISC_IB_085-A Jun 30, 2026 · Service Bulletin/Repair Instructions
      McNeilus Truck and Manufacturing provides these instructions for the installation of new bushings for the service cleanout door for all Side Loader refuse vehicles. The new bushings can help provide a tighter seal on the door.
    • ZR-IB-012-E May 7, 2026 · Other
      This bulletin instructs how to replace the Zero Radius™ (ZR) grabber carriage motor bolts with new bolts if the existing motor bolts are loosening. Revision E replaces two parts with updated parts.
    • MISC-IB-085 Apr 20, 2026 · Service Bulletin/Repair Instructions
      McNeilus Truck and Manufacturing provides these instructions for the installation of new bushings for the service cleanout door for all Side Loader refuse vehicles. The new bushings can help provide a tighter seal on the door.
    • MISC-IB-084-A Feb 26, 2026 · Service Bulletin/Repair Instructions
      McNeilus Truck and Manufacturing requires an inspection and replacement, if needed, to ensure the Bob Tail® Huck® bolts are fully swaged with correct thread exposure on the rear pivot cross member body mounts. Revision A updates the replacement bolt leng…
    • MISC-IB-084 Feb 4, 2026 · Service Bulletin/Repair Instructions
      McNeilus Truck and Manufacturing requires an inspection and replacement, if needed, to ensure the Bob Tail® Huck® bolts are fully swaged with correct thread exposure on the rear pivot cross member body mounts.
    • ZR-IB-018_A Oct 27, 2025 · Service Bulletin/Repair Instructions
      Instructions for the ZR speed limiter software update.
    • ZR-TSIB-012-D Apr 30, 2025 · Service Bulletin/Repair Instructions
      This bulletin instructs to how remove the Zero Radius™ (ZR) grabber carriage motor bolts/studs and replace with new bolts if the motor bolts are loosening. Revision D adds procedure steps to section 3.2 and removes an outdated image.
    • ZR-TSIB-012-C Apr 9, 2025 · Service Bulletin/Repair Instructions
      This bulletin instructs to how remove the Zero Radius™ (ZR) grabber carriage motor bolts/studs and replace with new bolts if the motor bolts are loosening. Revision C replaces studs with bolts
    • ZR-IB-016 Sep 30, 2024 · Service Bulletin/Repair Instructions
      It has been determined that certain McNeilus Zero Radius side loader refuse vehicles may have a hydraulic pressure spike that may cause premature failure to the fan cooler. The fan cooler may be permanently bypassed by following the instructions in this inf…
    • MISC-TSIB-081 Mar 14, 2024 · Service Bulletin/Repair Instructions
      According to an amended ruling in the visual inspection labeling requirement in Federal Motor Vehicle Safety Standard (FMVSS) No. 304, the periodic inspection interval for compressed natural gas (CNG) fuel containers has been modified to “at least every 1…
    • ZR-TSIB-015 Jun 5, 2023 · Service Bulletin/Repair Instructions
      McNeilus Truck and Manufacturing offers these instructions for the installation of a hydraulic reservoir breather upgrade kit to reduce oil leakage in in-body hydraulic reservoirs and frame mounted hydraulic reservoirs on Zero Radius (ZR) Side Loader refu…
    • MISC-TSIB-081 Mar 14, 2023 · Service Bulletin/Repair Instructions
      According to an amended ruling in the visual inspection labeling requirement in Federal Motor Vehicle Safety Standard (FMVSS) No. 304, the periodic inspection interval for compressed natural gas (CNG) fuel containers has been modified to “at least every 1…
    • WM-TSIB-022 Sep 1, 2022 · Service Bulletin/Repair Instructions
      McNeilus Truck and Manufacturing offers these instructions for the installation (retrofit installation) of a streetside panel/door on the tailgate in an effort to reduce trash buildup behind the CNG cover. This is for Zero Radius trucks with roof mounted …
    • MISC-TSIB-079 Sep 27, 2022 · Service Bulletin/Repair Instructions
      McNeilus Truck and Manufacturing provides these instructions for installing a hydraulic reservoir cork gasket. The installation of this gasket will repair leaks coming from the gasket between the in-tank filter and the reservoir.
    • MISC-TSIB-075-A Jul 7, 2022 · Service Bulletin/Repair Instructions
      The following information describes how to purge air and release stored hydraulic energy from a hydraulic system. All manual override features are intended for emergency use, not for continuous-duty operation.
    • ZR-TSIB-012-B Jan 18, 2022 · Service Bulletin/Repair Instructions
      This bulletin instructs to how remove the Zero Radius⢠(ZR) grabber carriage motor bolts and replace with studs if the motor bolts are loosening.
    • MISC-TSIB-078 Nov 2, 2021 · Service Bulletin/Repair Instructions
      McNeilus Truck and Manufacturing offers these instructions for ejector cylinder bypass testing.
    Source: NHTSA manufacturer communications files.
    About service bulletins