Model year

1999 Triumph Tiger

Body and fuel not decoded. Owner complaints on file from Mar 27, 2000 to Mar 27, 2000.

Recall campaigns covering this model year220k vehicles or units across those campaigns
Owner complaints1Close to the median 1999 vehicle
Severity index0.0Crash, fire, injury or death per 100
First 24 months1Complaints in its first two years
Complaints over time

Complaints about the 1999 Triumph Tiger peaked in 2000, with 1 filed

Owner complaints about this model year, by the year they were filed with NHTSA.

00.250.50.7512000120032006200920122015201820212026
Source: NHTSA ODI complaints file. The lighter column runs through October.
Components

100% of complaints about the 1999 Triumph Tiger name powertrain

Owner complaints by component. Hover or focus a bar for the crash, fire, injury or death count.

Powertrain
1
Source: NHTSA ODI complaints file. A complaint can name more than one component; it is counted under the first.
Recalls

2 recall campaigns cover the 1999 Triumph Tiger

Check a specific vehicle by VIN on NHTSA's site: a campaign may cover only part of a model year's production.

Recall campaigns for the 1999 Triumph Tiger
CampaignFiledSubjectComponentVehiclesRemedy
04V-156Apr 7, 2004On certain motorcycles, the fuel connector linking each of the feed and return fuel hoses to the fuel pump mounting plate may fracture following…Fuel system18,998Part replacement
99V-083Apr 15, 1999Vehicle description: motorcyclesEngine and cooling1,198Part replacement
Source: NHTSA ODI recalls file.
Owner complaints

What owners reported about the 1999 Triumph Tiger

The full text of every complaint filed with NHTSA about this model year, newest first. Complaints are filed by owners and are not verified by NHTSA; NHTSA removes personal details before publishing.

1 complaint on file, page 1 of 1.

  1. Filed Mar 27, 2000Greensburg, PAManual transmission

    ONE OF THE TRANSMISSIOIN SHAFTS WAS NOT GETTING ENOUGH OIL, CAUSING A SQUEALING NOISE THAT WAS GETTING LOUDER. THE SHAFT DRIED OUT, ALMOST CAUSING A LOCK UP OF THE TRANSMISSION. DEALER HAS BEEN CONTACTED. *AK

    NHTSA complaint 859210
Source: NHTSA ODI complaints file.
Investigations

NHTSA has not opened an investigation on this model year

Source: NHTSA ODI investigations file.
Service bulletins

44 manufacturer communications cover this model year

Technical service bulletins and other notices the manufacturer sent to dealers. A bulletin is not a recall.

  • Parts Feb 15, 2024 · Service Bulletin/Repair Instructions
    Dealer notice announcing the availability of Diagnostic software 2024-02 and dealers should begin using it immediately.
  • SMTCOM01 Jan 17, 2024 · Service Bulletin/Repair Instructions
    Dealer notice announcing the availability of Diagnostic software 2024-01 and dealers should begin using it immediately.
  • SMT-COM01 Dec 10, 2023 · Service Bulletin/Repair Instructions
    Dealer notice announcing the availability of Diagnostic software 2023-06 and dealers should begin using it immediately.
  • SMT-COM03 May 22, 2023 · Service Bulletin/Repair Instructions
    Dealer notice advising of a bug notification affecting calibration download function on certain systems.
  • SMT-COM01 Mar 5, 2023 · Service Bulletin/Repair Instructions
    Dealer notice announcing the availability of Diagnostic software 2023-02.1 and dealers should begin using it immediately.
  • SMT-TB230 Jun 4, 2023 · Service Bulletin/Repair Instructions
    Technical Bulletin 230 provides instructions that applies to Electronic Systems Commissioning and Motorcycle Unlocking, Introduction of New Instrument Hardware, Triumph Diagnostic Tool 2023-02 Update - Calibrations Removed From Service and Encapsulated Fixi…
  • SMT-COM03 Jun 4, 2023 · Service Bulletin/Repair Instructions
    Dealer notice announcing the availability of Diagnostic software 2023-02 and dealers should begin using it immediately.
  • SMT-COM02 Mar 4, 2023 · Service Bulletin/Repair Instructions
    Dealer notice announcing the availability of Diagnostic software 2023-02 and dealers should begin using it immediately.
  • SMT23891 Mar 20, 2023 · Service Bulletin/Repair Instructions
    Dealer notice announcing the availability of Diagnostic software 2023-01.3 and dealers should begin using it immediately.
  • SMT-COM05 Jul 22, 2022 · Service Bulletin/Repair Instructions
    Dealer notice announcing the availability of Diagnostic software 2022-08.1 and dealers should begin using it immediately.
  • SMT-COM04 Jul 20, 2022 · Service Bulletin/Repair Instructions
    Dealer notice announcing the availability of Diagnostic software 2022-08 and dealers should begin using it immediately.
  • SMTCOM04 Jun 21, 2022 · Service Bulletin/Repair Instructions
    Dealer notice announcing the availability of Diagnostic software 2022-07 and dealers should begin using it immediately.
  • Technical Bullet Nov 19, 2022 · Service Bulletin/Repair Instructions
    Dealer notice announcing the availability of Diagnostic software 2022-11.1 and dealers should begin using it immediately.
  • 22714 Apr 11, 2022 · Service Bulletin/Repair Instructions
    Dealer notice announcing the availability of Diagnostic software 2022-11 and dealers should begin using it immediately.
  • 22651 Jan 11, 2022 · Service Bulletin/Repair Instructions
    Dealer notice announcing the availability of Diagnostic software 2022-10 and dealers should begin using it immediately.
  • 20733 SVC Feb 8, 2021 · Service Bulletin/Repair Instructions
    Triumph has released diagnostic software version 2022-01
  • 20680 SVC Feb 1, 2022 · Service Bulletin/Repair Instructions
    Triumph has released Technical Bulletin 222 including 8 subjects across a range of models.
  • SMT-COM01-13APRI Apr 13, 2022 · Service Bulletin/Repair Instructions
    Dealer notice announcing the availability of Diagnostic software 2022-03.1 and dealers should begin using it immediately.
  • SMTCOM01 Mar 24, 2022 · Service Bulletin/Repair Instructions
    Dealer notice announcing the availability of Diagnostic software 2022-02 and dealers should begin using it immediately.
  • SMT-COM04-18MAY2 May 18, 2021 · Service Bulletin/Repair Instructions
    Dealer notice announcing the availability of Diagnostic software 2021-09 and dealers should begin using it immediately.
  • SMT-TN-165 Oct 1, 2015 · Service Bulletin/Repair Instructions
    Mudgaurd extension, swinging arm/chain rubbing strip, final drive unit, maximum payload, twist grip position sensor, rear suspension drag link and drop link fixings, recommended crankcase sealnt, silencer heat sheild clamp fixings, front brake caliper bolts…
  • SMT-COM04-16DECE Dec 16, 2020 · Service Bulletin/Repair Instructions
    Dealer notice announcing the availability of Diagnostic software 2020-12 and dealers should begin using it immediately.
  • SMT-COM01-06OCTO Jun 10, 2020 · Service Bulletin/Repair Instructions
    Dealer notice announcing the availability of Diagnostic software 2020-10 and dealers should begin using it immediately.
  • SMT-COM06-18SEPT Sep 18, 2020 · Service Bulletin/Repair Instructions
    Dealer notice announcing the availability of Diagnostic software 2020-9.1 and dealers should begin using it immediately.
  • SMT-COM04-16JUNE Jun 16, 2020 · Service Bulletin/Repair Instructions
    Dealer notice announcing the availability of Diagnostic software 2020-6.2 and dealers should begin using it immediately.
  • SMT-COM02-14APRI Apr 14, 2020 · Service Bulletin/Repair Instructions
    Dealer notice announcing the availability of Diagnostic software 2020-05 and dealers should begin using it immediately.
  • SMT-COM03-19FEB2 Feb 19, 2020 · Service Bulletin/Repair Instructions
    Dealer notice announcing the availability of Diagnostic software 2020-3 and dealers should begin using it immediately.
  • SMT-COM02-18FEB2 Feb 18, 2020 · Service Bulletin/Repair Instructions
    Dealer notice announcing the auto-issue of three new service tools.
  • SMT-TB201-20DEC2 Dec 20, 2019 · Service Bulletin/Repair Instructions
    Technical Bulletin 200 provides instructions that apply to Steering Lock and Keys, Neutral Position Adaption, Triumph Diagnostic Tool - End of Support for Microsoft Windows 7®, Triumph Diagnostic Tool - Internet Connection and Minimum eEquipment Requirement…
  • SMT-COM07-20DEC2 Dec 20, 2019 · Service Bulletin/Repair Instructions
    Dealer notice announcing the availability of Technical Bulletin 201.
  • SMT-COM03-16DEC2 Dec 16, 2019 · Service Bulletin/Repair Instructions
    Dealer notice announcing the availability of Diagnostic software 2019-8 and dealers should begin using it immediately.
  • SMT-TB197-18OCT2 Oct 18, 2019 · Service Bulletin/Repair Instructions
    Technical Bulletin 197 provides instructions that apply to Alternator Cover Installation - Addition of Sealant, Steering Head Bearings - Adjustment, Gear Change Selector Mechanism Kit and Fork Seal Cleaner.
  • SMT-COM03-18OCT2 Oct 18, 2019 · Service Bulletin/Repair Instructions
    Dealer notice announcing the availability of Technical Bulletin 197 & 198.
  • SMT-COM02-18OCT2 Oct 18, 2019 · Service Bulletin/Repair Instructions
    Dealer notice announcing the availability of Diagnostic software 2019-5.1 and dealers should begin using it immediately.
  • SMT-COM01-15OCT2 Oct 15, 2019 · Service Bulletin/Repair Instructions
    Dealer notice announcing the availability of Diagnostic software 2019-5 and dealers should begin using it immediately.
  • SMT-COM02-24JUN2 Jun 24, 2019 · Service Bulletin/Repair Instructions
    Dealer notice concluding the comprehensive test conducted to explore the warranty claims for headlamps with surface damage and corrective actions to prevent the issue.
  • SMTCom0102Aug201 Feb 8, 2018 · Service Bulletin/Repair Instructions
    Dealer notice announcing that Diagnostic software 2018-7 is now available and dealers should begin using it immediately.
  • SMT-Com01-23Janu Jan 23, 2018 · Service Bulletin/Repair Instructions
    Dealer notice announcing that Diagnostic Software 2018-1 is now available and dealers should begin using it immediately.
  • SMT-TN 160 1 Nov Nov 1, 2014 · Service Bulletin/Repair Instructions
    Technical service bulletin 160 addressing 9 service instructions, some of which apply to all models. Instructions relate to frame bolt tightening sequence, new harness and harness/gear position sensor parts kit, panniers, instrument pack washer, side stand …
  • SMT-TN 159 1 Oct Oct 1, 2014 · Service Bulletin/Repair Instructions
    Technical service bulletin 159 addressing 19 service instructions, some of which apply to all models. Instructions relate to piston and piston top ring, alternator rotor retaining bolt, rear brake hose guide, auxiliary lights, headlight spares, gear selecto…
  • TN-111 Oct 19, 2009 · Service Bulletin/Repair Instructions
    TRIUMPH MOTORCYCLES: WORKSHOP TECHNICIANS AND RELEVANT STAFF ARE AWARE OF CONTENTS FOR REPAIR. THIS EDITION-CYLINDER HEAD; CARB ADAPTER AND EFI ADAPTER; HEADSTOCK BEARINGS; LICENSE PLATE BRACKET; FRONT BRAKE DISC; HEADLIGHT RIM; STARTER SOLENOID; RADIATOR…
  • TB-104 Nov 1, 2008 · Service Bulletin/Repair Instructions
    TRIUMPH MOTORCYCLE: HEADERS DISCOLOURATION, CAMSHAFT COVER, HORN, BRAKE CALIPER SLIDING PIN GREASING, CAMSHAFT CAP LADDER BOLTS TIGHTENING SEQUENCE, OIL PRESSURE RELIEF VALVE, NEW COOLANT, WARNING LABELS, ENGINE CONTROL MODULE (ECM) BRACKET, FORK SHROUDS, …
  • 85 Mar 1, 2006 · Service Bulletin/Repair Instructions
    TECHNICAL NEWS CONCERNING TRIUMPH MOTORCYCLES. *AK
  • 80 Aug 1, 2005 · Service Bulletin/Repair Instructions
    WIRE SPOKED WHEELS. TRIUMPH . *TT
Source: NHTSA manufacturer communications files.