Model year

2000 Triumph Trophy

Body and fuel not decoded. Owner complaints on file from no date to no date.

Recall campaigns covering this model year0No recall campaign lists this model year
Owner complaints0Not enough peers on file
Severity indexNoneCrash, fire, injury or death per 100
First 24 months0Complaints in its first two years
Complaints over time

Complaints about the 2000 Triumph Trophy by year filed

Owner complaints about this model year, by the year they were filed with NHTSA.

No campaigns match these filters.Reset filters
Source: NHTSA ODI complaints file. The lighter column runs through October.
Components

Complaints by component

Owner complaints by component. Hover or focus a bar for the crash, fire, injury or death count.

No campaigns match these filters.Reset filters
Source: NHTSA ODI complaints file. A complaint can name more than one component; it is counted under the first.
Recalls

No recall campaign lists the 2000 Triumph Trophy

Check a specific vehicle by VIN on NHTSA's site: a campaign may cover only part of a model year's production.

Source: NHTSA ODI recalls file.
Owner complaints

What owners reported about the 2000 Triumph Trophy

The full text of every complaint filed with NHTSA about this model year, newest first. Complaints are filed by owners and are not verified by NHTSA; NHTSA removes personal details before publishing.

0 complaints on file.

    Source: NHTSA ODI complaints file.
    Investigations

    NHTSA has not opened an investigation on this model year

    Source: NHTSA ODI investigations file.
    Service bulletins

    58 manufacturer communications cover this model year

    Technical service bulletins and other notices the manufacturer sent to dealers. A bulletin is not a recall.

    • COM3_29478 Dec 16, 2024 · Service Bulletin/Repair Instructions
      Dealer notice announcing the availability of Diagnostic software 2024-14 and that dealers should begin using it immediately.
    • COM3-29131 Nov 13, 2024 · Service Bulletin/Repair Instructions
      Dealer notice announcing the availability of Diagnostic software 2024-13 and dealers should begin using it immediately.
    • COM2-28473 Sep 11, 2024 · Service Bulletin/Repair Instructions
      Dealer notice announcing the availability of Diagnostic software 2024-12 and dealers should begin using it immediately.
    • COM1-28369 Aug 28, 2024 · Service Bulletin/Repair Instructions
      Dealer notice announcing the availability of Diagnostic software 2024-11 and that dealers should begin using it immediately.
    • COM3-28197 Jul 29, 2024 · Service Bulletin/Repair Instructions
      Dealer notice announcing the availability of Diagnostic software 2024-10 and dealers should begin using it immediately.
    • COM2-28140 Jul 18, 2024 · Service Bulletin/Repair Instructions
      Dealer notice announcing the availability of Diagnostic software 2024-09.1 and dealers should begin using it immediately.
    • COM1-28064 Jul 9, 2024 · Service Bulletin/Repair Instructions
      Dealer notice announcing the availability of Diagnostic software 2024-09 and dealers should begin using it immediately.
    • COM2-27933 Jun 25, 2024 · Service Bulletin/Repair Instructions
      Dealer notice announcing the availability of Diagnostic software 2024-08.1 and dealers should begin using it immediately.
    • COM1-27828 Jun 14, 2024 · Service Bulletin/Repair Instructions
      Dealer notice announcing the availability of Diagnostic software 2024-08 and dealers should begin using it immediately.
    • COM7-TDT May 21, 2024 · Service Bulletin/Repair Instructions
      Dealer notice announcing the availability of Diagnostic software 2024-07 and dealers should begin using it immediately.
    • SMT-COM-02 Mar 18, 2024 · Service Bulletin/Repair Instructions
      Dealer notice announcing the availability of Diagnostic software 2024-04 and dealers should begin using it immediately.
    • SMT-COM-01 Apr 3, 2024 · Service Bulletin/Repair Instructions
      Dealer notice announcing the availability of Diagnostic software 2024-03 and dealers should begin using it immediately.
    • Parts Feb 15, 2024 · Service Bulletin/Repair Instructions
      Dealer notice announcing the availability of Diagnostic software 2024-02 and dealers should begin using it immediately.
    • SMTCOM01 Jan 17, 2024 · Service Bulletin/Repair Instructions
      Dealer notice announcing the availability of Diagnostic software 2024-01 and dealers should begin using it immediately.
    • SMT-COM01 Dec 10, 2023 · Service Bulletin/Repair Instructions
      Dealer notice announcing the availability of Diagnostic software 2023-06 and dealers should begin using it immediately.
    • SMT-COM03 May 22, 2023 · Service Bulletin/Repair Instructions
      Dealer notice advising of a bug notification affecting calibration download function on certain systems.
    • SMT-COM01 Mar 5, 2023 · Service Bulletin/Repair Instructions
      Dealer notice announcing the availability of Diagnostic software 2023-02.1 and dealers should begin using it immediately.
    • SMT-TB230 Jun 4, 2023 · Service Bulletin/Repair Instructions
      Technical Bulletin 230 provides instructions that applies to Electronic Systems Commissioning and Motorcycle Unlocking, Introduction of New Instrument Hardware, Triumph Diagnostic Tool 2023-02 Update - Calibrations Removed From Service and Encapsulated Fixi…
    • SMT-COM03 Jun 4, 2023 · Service Bulletin/Repair Instructions
      Dealer notice announcing the availability of Diagnostic software 2023-02 and dealers should begin using it immediately.
    • SMT-COM02 Mar 4, 2023 · Service Bulletin/Repair Instructions
      Dealer notice announcing the availability of Diagnostic software 2023-02 and dealers should begin using it immediately.
    • SMT23891 Mar 20, 2023 · Service Bulletin/Repair Instructions
      Dealer notice announcing the availability of Diagnostic software 2023-01.3 and dealers should begin using it immediately.
    • SMT-COM05 Jul 22, 2022 · Service Bulletin/Repair Instructions
      Dealer notice announcing the availability of Diagnostic software 2022-08.1 and dealers should begin using it immediately.
    • SMT-COM04 Jul 20, 2022 · Service Bulletin/Repair Instructions
      Dealer notice announcing the availability of Diagnostic software 2022-08 and dealers should begin using it immediately.
    • SMTCOM04 Jun 21, 2022 · Service Bulletin/Repair Instructions
      Dealer notice announcing the availability of Diagnostic software 2022-07 and dealers should begin using it immediately.
    • Technical Bullet Nov 19, 2022 · Service Bulletin/Repair Instructions
      Dealer notice announcing the availability of Diagnostic software 2022-11.1 and dealers should begin using it immediately.
    • 22714 Apr 11, 2022 · Service Bulletin/Repair Instructions
      Dealer notice announcing the availability of Diagnostic software 2022-11 and dealers should begin using it immediately.
    • 22651 Jan 11, 2022 · Service Bulletin/Repair Instructions
      Dealer notice announcing the availability of Diagnostic software 2022-10 and dealers should begin using it immediately.
    • 20733 SVC Feb 8, 2021 · Service Bulletin/Repair Instructions
      Triumph has released diagnostic software version 2022-01
    • SMT-COM01-13APRI Apr 13, 2022 · Service Bulletin/Repair Instructions
      Dealer notice announcing the availability of Diagnostic software 2022-03.1 and dealers should begin using it immediately.
    • SMTCOM01 Mar 24, 2022 · Service Bulletin/Repair Instructions
      Dealer notice announcing the availability of Diagnostic software 2022-02 and dealers should begin using it immediately.
    • SMT-COM04-18MAY2 May 18, 2021 · Service Bulletin/Repair Instructions
      Dealer notice announcing the availability of Diagnostic software 2021-09 and dealers should begin using it immediately.
    • SMT-TN-166 Mar 1, 2016 · Service Bulletin/Repair Instructions
      Crackshaft position sensor/ignition pickup, front brake hose p-clip, headlight fixings, reed valve cover torque fixing, engine bar plugs, lower yoke wire guide, front fork oil level and volume, motorcycle assembly guide update-backrest bar, rear bevel box p…
    • SMT-TN-154 Dec 1, 2013 · Service Bulletin/Repair Instructions
      If a customer reports excessive top-end engine noise on an engine fitted to the above models up to VIN 602960, the dealer is requested to replace the cylinder head with a new cylinder head and camshaft drive chain tensioner following the procedure listed be…
    • SMT-TN-153 Dec 1, 2013 · Service Bulletin/Repair Instructions
      If a Trophy or Trophy SE customer reports excessive top-end engine noise (a ticking and or knocking noise) on an engine fitted to the above models up to VIN 602960, the dealer is requested to arrange the return of the motorcycle to Triumph Motorcycles to pe…
    • SMT-TN-146 May 1, 2013 · Service Bulletin/Repair Instructions
      The throttle balance procedure described in the above models? Service Manuals is correct for the Street Triple and Street Triple R only. For the correct method of throttle balance for the above models, carry out the following procedure.
    • SMT-COM04-16DECE Dec 16, 2020 · Service Bulletin/Repair Instructions
      Dealer notice announcing the availability of Diagnostic software 2020-12 and dealers should begin using it immediately.
    • SMT-COM01-06OCTO Jun 10, 2020 · Service Bulletin/Repair Instructions
      Dealer notice announcing the availability of Diagnostic software 2020-10 and dealers should begin using it immediately.
    • SMT-COM06-18SEPT Sep 18, 2020 · Service Bulletin/Repair Instructions
      Dealer notice announcing the availability of Diagnostic software 2020-9.1 and dealers should begin using it immediately.
    • SMT-COM04-16JUNE Jun 16, 2020 · Service Bulletin/Repair Instructions
      Dealer notice announcing the availability of Diagnostic software 2020-6.2 and dealers should begin using it immediately.
    • SMT-COM02-14APRI Apr 14, 2020 · Service Bulletin/Repair Instructions
      Dealer notice announcing the availability of Diagnostic software 2020-05 and dealers should begin using it immediately.
    • SMT-COM06-17MAR2 Mar 17, 2020 · Service Bulletin/Repair Instructions
      Dealer notice announcing the availability of Diagnostic software 2020-4.2 available and dealers should begin using it immediately.
    • SMT-COM03-19FEB2 Feb 19, 2020 · Service Bulletin/Repair Instructions
      Dealer notice announcing the availability of Diagnostic software 2020-3 and dealers should begin using it immediately.
    • SMT-COM02-18FEB2 Feb 18, 2020 · Service Bulletin/Repair Instructions
      Dealer notice announcing the auto-issue of three new service tools.
    • SMT-TB201-20DEC2 Dec 20, 2019 · Service Bulletin/Repair Instructions
      Technical Bulletin 200 provides instructions that apply to Steering Lock and Keys, Neutral Position Adaption, Triumph Diagnostic Tool - End of Support for Microsoft Windows 7®, Triumph Diagnostic Tool - Internet Connection and Minimum eEquipment Requirement…
    • SMT-COM07-20DEC2 Dec 20, 2019 · Service Bulletin/Repair Instructions
      Dealer notice announcing the availability of Technical Bulletin 201.
    • SMT-COM03-16DEC2 Dec 16, 2019 · Service Bulletin/Repair Instructions
      Dealer notice announcing the availability of Diagnostic software 2019-8 and dealers should begin using it immediately.
    • SMT-TB197-18OCT2 Oct 18, 2019 · Service Bulletin/Repair Instructions
      Technical Bulletin 197 provides instructions that apply to Alternator Cover Installation - Addition of Sealant, Steering Head Bearings - Adjustment, Gear Change Selector Mechanism Kit and Fork Seal Cleaner.
    • SMT-COM03-18OCT2 Oct 18, 2019 · Service Bulletin/Repair Instructions
      Dealer notice announcing the availability of Technical Bulletin 197 & 198.
    • SMT-COM02-18OCT2 Oct 18, 2019 · Service Bulletin/Repair Instructions
      Dealer notice announcing the availability of Diagnostic software 2019-5.1 and dealers should begin using it immediately.
    • SMT-COM01-15OCT2 Oct 15, 2019 · Service Bulletin/Repair Instructions
      Dealer notice announcing the availability of Diagnostic software 2019-5 and dealers should begin using it immediately.
    • SMT-COM02-24JUN2 Jun 24, 2019 · Service Bulletin/Repair Instructions
      Dealer notice concluding the comprehensive test conducted to explore the warranty claims for headlamps with surface damage and corrective actions to prevent the issue.
    • SMTCom0102Aug201 Feb 8, 2018 · Service Bulletin/Repair Instructions
      Dealer notice announcing that Diagnostic software 2018-7 is now available and dealers should begin using it immediately.
    • SMT-Com01-23Janu Jan 23, 2018 · Service Bulletin/Repair Instructions
      Dealer notice announcing that Diagnostic Software 2018-1 is now available and dealers should begin using it immediately.
    • SMT-TN 160 1 Nov Nov 1, 2014 · Service Bulletin/Repair Instructions
      Technical service bulletin 160 addressing 9 service instructions, some of which apply to all models. Instructions relate to frame bolt tightening sequence, new harness and harness/gear position sensor parts kit, panniers, instrument pack washer, side stand …
    • SMT-TN 159 1 Oct Oct 1, 2014 · Service Bulletin/Repair Instructions
      Technical service bulletin 159 addressing 19 service instructions, some of which apply to all models. Instructions relate to piston and piston top ring, alternator rotor retaining bolt, rear brake hose guide, auxiliary lights, headlight spares, gear selecto…
    • SMT-TN 155 1 Feb Feb 1, 2014 · Service Bulletin/Repair Instructions
      Technical service bulletin 155 addressing 9 service instructions, some of which apply to all models. Instructions relate to the upper drive belt guard, catalytic converter mounting bracket, torque figures updates, horn fixing, centre stand fixings, front b…
    • 85 Mar 1, 2006 · Service Bulletin/Repair Instructions
      TECHNICAL NEWS CONCERNING TRIUMPH MOTORCYCLES. *AK
    • 269 Sep 25, 2001 · Service Bulletin/Repair Instructions
      SUBJECT REGARDING SET-UP INSTRUCTIONS TO BE USED TO UNCRATE 2000 MODEL YEAR MOTORCYCLES. *TT
    Source: NHTSA manufacturer communications files.