Complaints over time
Complaints about the 2010 Victory Vision peaked in 2014, with 4 filed
Owner complaints about this model year, by the year they were filed with NHTSA.
Source: NHTSA ODI complaints file. The lighter column runs through October.
Model year
2010 Victory Vision
Motorcycle, built in United States. Owner complaints on file from no date to no date.
Recall campaigns covering this model year0No recall campaign lists this model year
Owner complaints0Not enough peers on file
Severity indexNoneCrash, fire, injury or death per 100
First 24 months0Complaints in its first two years
Components
0% of complaints about the 2010 Victory Vision name structure
Owner complaints by component. Hover or focus a bar for the crash, fire, injury or death count.
Source: NHTSA ODI complaints file. A complaint can name more than one component; it is counted under the first.
Recalls
No recall campaign lists the 2010 Victory Vision
Check a specific vehicle by VIN on NHTSA's site: a campaign may cover only part of a model year's production.
Source: NHTSA ODI recalls file.
Owner complaints
What owners reported about the 2010 Victory Vision
The full text of every complaint filed with NHTSA about this model year, newest first. Complaints are filed by owners and are not verified by NHTSA; NHTSA removes personal details before publishing.
6 complaints on file, page 1 of 1.
- Filed May 27, 2014Failure Apr 12, 20146,200 milesStaten Island, NYUnderbody shields
REAR PART OF THE FRONT FENDER WHILE RIDING GETS CAUGHT UP IN THE BODY FAIRING CAUSING LOSS OF STEERING CONTROL AND ENDS UP CRACKING AND BRAKING OFF. *TR
NHTSA complaint 10594161 - Filed May 27, 2014Failure Jul 3, 20111,800 milesStaten Island, NYUnderbody shields
REAR PART OF THE FRONT FENDER WHILE RIDING GETS CAUGHT UP IN THE BODY FAIRING CAUSING LOSS OF STEERING CONTROL AND ENDS UP CRACKING AND BRAKING OFF. *TR
NHTSA complaint 10594160 - Filed Apr 29, 2014Failure Jun 24, 20103,767 milesNorth Brunswick, NJBody
REF: INVESTIGATION PE 14-006 REAR SECTION OF FRONT WHEEL FENDER CRACKED AT MOUNTING POINTS AND INTERFERED WITH STEERING. PART WAS REPLACED BY DEALER AT MY EXPENSE, NOT UNDER WARRANTEE. THIS INCIDENT IS DOCUMENTED ON MY DEALER'S WORK ORDER #1948. *JS
NHTSA complaint 10585428 - Filed Apr 26, 2014Failure Apr 10, 201310,000 milesSparrows PT, MDSteering, Body, Suspension
WHILE RIDING MY 2010 ABS VICTORY VISION AT APPROXIMATELY 45 MPH, I HEARD A SCRAPING SOUND FROM THE FRONT TIRE AREA. SINCE IT WAS BRIEF I THOUGHT NOTHING OF IT. LATER, ON A VICTORY SPECIFIC WEBSITE SOMEONE POSTED THAT THE REAR SECTION OF THEIR FRONT FENDER HAD BROKEN FREE AND BECOME LODGED IN THE STEERING IN SUCH A WAY SAT TO PREVENT TURNING THE HANDLE BARS. REMEMBERING THE ODD SOUND FROM AN EARLIER RIDE I CHECKED MY BIKE AND FOUND MY FRONT FENDER (REAR SECTION) HAD CRACKED AND WAS LOOSE. MY ASSUMPTION IS THAT THE SOUND I HEARD WAS THE PLASTIC RUBBING THE TIRE WHEN IT FIRST BROKE LOOSE. *TR
NHTSA complaint 10585085 - Filed Aug 19, 2013Failure Aug 19, 201318,245 milesRichfield, OHBody
THE FRONT FENDER ON THIS MOTORCYCLE IS 2 PIECE. THE FRONT SECTION IS STAMPED STEEL AND THE REAR SECTION IS PLASTIC. THE PLASTIC REAR SECTION IS MOUNTED TO THE FORKS WITH 2 HEX HEAD BOLTS. THE PLASTIC FENDER CRACKS AT THE BOLT ATTACHMENT POINTS CAUSING THE REAR FENDER SECTION TO COME LOOSE AND JAM INTO THE FRONT FAIRING OPENING. WHEN THIS HAPPENS ALL STEERING CONTROL IS LOST. THIS IS BECOMING A COMMON PROBLEM ON THESE VEHICLES ONCE THEY GET APPROX. 2 YEARS OLD AND OLDER. *TR
NHTSA complaint 10536052 - Filed Oct 26, 2012Failure Aug 7, 2012Punta Gorda, FLBody
TL*THE CONTACT OWNS A 2010 VICTORY VISION MOTORCYCLE. THE CONTACT STATED THAT THE FRONT OF THE REAR FENDER BECAME CRACKED, CAUSING THE REAR WHEEL TO SEIZE ABNORMALLY. THE CONTACT WAS ABLE TO STOP THE VEHICLE WITHOUT INCIDENT. THE CONTACT SPOKE WITH THE DEALER AND WAS ADVISED THAT THE FENDER WOULD NEED TO BE REPLACED, BUT THE PART WAS ON BACK ORDER AND REPAIRS COULD NOT BE MADE UNTIL FURTHER NOTICE. THE VEHICLE WAS NOT REPAIRED. THE FAILURE MILEAGE WAS UNKNOWN, BUT THE CURRENT MILEAGE WAS 22,622. UPDATED 12/11/12*LJ THE CONSUMER STATED THE REAR PORTION OF THE FRONT FENDER CRACKED LEAVING A PORTION TO BE LODGED INTO THE BODY OF THE MAINFRAME OF THE MOTORCYCLE RENDERING THE BIKE INOPERABLE TO STEER. UPDATED 12/12/12
NHTSA complaint 10482347
Source: NHTSA ODI complaints file.
Investigations
1 NHTSA investigation on file
- PE14006 Preliminary evaluation, Structure
Motorcycle steering lockup
Opened Mar 10, 2014, closed May 22, 2015
Source: NHTSA ODI investigations file.
Service bulletins
4 manufacturer communications cover this model year
Technical service bulletins and other notices the manufacturer sent to dealers. A bulletin is not a recall.
- SAF-16-01 Aug 16, 2016 · Service Bulletin/Repair Instructions
A STOP RIDE MEANS THE CONSUMER MUST NOT OPERATE THEIR VEHICLE UNTIL THE REPAIR IS COMPLETE. We have been made aware that some dealers are incorrectly communicating the importance of STOP RIDE communications. - V-15-07-02 Jul 7, 2015 · Service Bulletin/Repair Instructions
The Victory Motorcycle Division of Polaris Industries Inc. has determined that certain California Air Resource Board (CARB) certified Victory Vision models, equipped with approved Stage 1 accessory exhaust, must have the Stage 1 Certification decal updated… - V-15-02 Jun 24, 2015 · Service Bulletin/Repair Instructions
Victory Motorcycles has determined that 2008-2015 Victory Vision front fenders may not meet internal durability standards. Certain operating conditions may cause the fender halves to crack at the mounting holes. A fender bracket kit has been developed to ad… - TSB-V-15-02AB Jun 24, 2015 · Service Bulletin/Repair Instructions
VICTORY MC: TSB HAS AN OWNER NOTIFICATION LETTER. SELECT DOCUMENT SEARCH BUTTON BELOW. AT MOUNTING HOLES ON FRONT FENDER HALVES, CRACKS WILL DEVELOP AND EITHER HAVE BOTH OR ONE REPLACED. MODEL 2008-15 VISION. *PE
Source: NHTSA manufacturer communications files.