AutoStatsIQ
Data through Oct 2026
Manufacturer profile

Terex South Dakota

Terex South Dakota has filed 32 recall campaigns with NHTSA since 2015, covering 16k vehicles or units by the manufacturer's own estimates.

Makes in its campaigns
Terex  32Terex Advance  1
Campaigns filed in 2026 to date3No campaigns in 2025
Vehicles affected5,4062026 to date
Campaigns on file322015 to 2026
Do-not-drive or park-outside0Campaigns with an advisory

Filed under the name "Terex South Dakota, Inc.".

Campaigns per year

Terex South Dakota has averaged 2 campaigns a year since 2021, below its 2016 peak of 6

Terex South Dakota recall campaigns by report date, 2015 to 2026. 2026 runs through October.

02462015201662017201820192020202120222023202420252026
Source: NHTSA ODI recalls file. The lighter column is a partial year.
Components

Equipment is Terex South Dakota's most recalled component since 2016

Terex South Dakota campaigns by primary component, 2016 to 2026.

Equipment
23
Electrical system
4
Structure
3
Suspension
1
Source: NHTSA ODI. Each campaign counted once.
Component trends
Remedy type

Terex South Dakota uses software fixes less than the industry: 0% of its 2026 campaigns

Share of campaigns remedied by a software update, Terex South Dakota against all manufacturers, by year.

Terex South DakotaAll manufacturers
020%40%60%2016201820202022202420260%18%
Source: NHTSA ODI remedy descriptions, classified by rule (see Methodology).
Model years covered

Model year 2015 is covered by the most Terex South Dakota campaigns, 12

Terex South Dakota campaigns covering each model year, last fifteen model years. A campaign counts once for each year it covers.

03691220151220162017201820192020202120222023202420252026
Source: NHTSA ODI recalls file.
Latest campaigns

The latest Terex South Dakota filings

The ten most recent campaigns, by report date.

Latest Terex South Dakota campaigns
CampaignFiledSubjectComponentVehiclesRemedy
26E-016Mar 30, 2026Insufficient weld on the plate weldment may crack, causing the retaining pin to separateEquipment3,015Part replacement
26V-167Mar 19, 2026Insufficient weld on the plate weldment may crack, causing the retaining pin to separateEquipment2,303Part replacement
26V-006Jan 12, 2026Control valve may have been assembled with an incorrect plug, causing the hydraulic equipment to overheatEquipment88Repair or modification
24V-740Oct 3, 2024Jib extension hydraulic cylinder rod may have a weak weld that can failEquipment37Part replacement
24V-526Jul 11, 2024Replacement basket brackets may not be compatible with the original basket retaining pins and cause the basket to unintentionally tiltEquipment172Part replacement
24V-438Jun 13, 2024Master leveling controller may lose the ability to level the platform if power is lost while squeezing the enable triggerElectrical system121Software update
24V-042Jan 25, 2024Boom rotation bearing bolts may not be tightened properlyEquipment340Repair or modification
23V-703Oct 19, 2023Bolts used to mount the aerial device to the sub-base may not be tightened properly, which could result in bolt failure, allowing the aerial…Equipment17Part replacement
23V-396Jun 2, 2023Subframe which the aerial device bolts to may not be welded properly, which could result in weld failure, allowing the aerial device to fallEquipment8Inspection
22V-893Dec 2, 2022Seam in the boom structure may have been improperly welded, causing the weld to crackEquipment431Part replacement
Source: NHTSA ODI.
All 32 campaigns in the Explorer
Largest campaigns

Terex South Dakota's five largest campaigns on file

Vehicles or units affected, millions, any year.

  1. 2026 Insufficient weld on the plate weldment may…0.00M
  2. 2026 Insufficient weld on the plate weldment may…0.00M
  3. 2016 Affected aerial devices may have inadequate…0.00M
  4. 2018 Platform control enable system may be…0.00M
  5. 2022 Pivot points may not have been lubricated…0.00M
Source: NHTSA ODI.