AutoStatsIQ
Data through Oct 2026
Model year

2015 Altec Aerial Device

Body and fuel not decoded. Owner complaints on file from no date to no date.

Recalls (20)Complaints (0)Investigations (0)Bulletins (21)
Recall campaigns covering this model year2034k vehicles or units across those campaigns
Owner complaints0Not enough peers on file
Severity indexNoneCrash, fire, injury or death per 100
First 24 months0Complaints in its first two years
Complaints over time

Complaints about the 2015 Altec Aerial Device by year filed

Owner complaints about this model year, by the year they were filed with NHTSA.

No campaigns match these filters.Reset filters
Source: NHTSA ODI complaints file. The lighter column runs through October.
Components

Complaints by component

Owner complaints by component. Hover or focus a bar for the crash, fire, injury or death count.

No campaigns match these filters.Reset filters
Source: NHTSA ODI complaints file. A complaint can name more than one component; it is counted under the first.
Recalls

20 recall campaigns cover the 2015 Altec Aerial Device

Check a specific vehicle by VIN on NHTSA's site: a campaign may cover only part of a model year's production.

Recall campaigns for the 2015 Altec Aerial Device
CampaignFiledSubjectComponentVehiclesRemedy
25V-562Aug 29, 2025Cable step wire rope assembly may be improperly secured, which can allow the cable entry step to detach from the vehicleStructure903Part replacement
25V-250Apr 17, 2025Cracks may develop in the legs of the mounting frame, which can cause the mounting frame side plate to breakEquipment103Repair or modification
24V-015Jan 11, 2024Cables in the engine compartment may contact the vehicle's hood, damaging the cables and causing a short circuitElectrical system437Repair or modification
22V-613Aug 10, 2022Weld between the base boom and the auger stow bracket could crackEquipment975Repair or modification
21V-884Nov 15, 2021Cracks may develop in the legs of the mounting frame, which can cause the mounting frame side plate to breakEquipment4,055Repair or modification
21V-736Sep 23, 2021Cracks may develop in the legs of the mounting frame, which can cause the mounting frame side plate to breakEquipment2,115Repair or modification
21V-409Jun 1, 2021Lower and upper boom raise spools can shift after releasing the joystick or control interlockEquipment1,977Part replacement
20V-502Aug 25, 2020During an HC Desorb cycle, the vehicle's idle will rapidly rise causing an increase in pump flowEngine and cooling17Software update
20V-301May 26, 2020Tow hitch may have incorrect load rating markings, and may have been damaged by unintentional overloadingEquipment396Repair or modification
19V-602Aug 15, 2019Recovery winch valve may allow the winch to lift more than it is rated forEquipment23Repair or modification
19V-483Jun 21, 2019Accessories utilizing chassis air supply may be missing pressure protection valvesBrakes957Repair or modification
18V-728Oct 16, 2018Due to voltage and current spikes, the converter can fail and cause a fireElectrical system24Part replacement
18V-552Aug 22, 2018Platform mounting holes may fail, causing the platform to move unexpectedlyStructure530Repair or modification
18V-348May 29, 2018This towing combination was shipped without a placard that provides the maximum allowable towing limit, possibly resulting in the receiver tube…Trailer hitches201Label or owner notice
18V-110Feb 14, 2018Platform leveling yoke may fail, possibly causing an occupant to fall from the platformEquipment18,000Part replacement
17V-560Sep 11, 2017Jib mast on these vehicles may bend under loadEquipment143Part replacement
17V-175Mar 14, 2017Cable within the IMS may have been improperly installed, possibly causing the cable to rub against an electrical component and short circuitElectrical system335Part replacement
16V-710Oct 5, 2016Affected aerial devices have a fiberglass cover over the boom tip that may have an improperly sized openingEquipment219Part replacement
16V-536Jul 14, 2016Affected vehicles have a hydraulic motor whose shaft may fail resulting in unexpected movement of the winch or the capstanEquipment252Part replacement
15V-473Jul 28, 2015Affected aerial devices outrigger interlock control system may not detect proper deployment of the outriggers, allowing for instability of the boomEquipment2,514Part replacement
Source: NHTSA ODI recalls file.
Look up a VIN at NHTSA
Owner complaints

What owners reported about the 2015 Altec Aerial Device

The full text of every complaint filed with NHTSA about this model year, newest first. Complaints are filed by owners and are not verified by NHTSA; NHTSA removes personal details before publishing.

0 complaints on file.

    Source: NHTSA ODI complaints file.
    Investigations

    NHTSA has not opened an investigation on this model year

    Source: NHTSA ODI investigations file.
    All investigations
    Service bulletins

    21 manufacturer communications cover this model year

    Technical service bulletins and other notices the manufacturer sent to dealers. A bulletin is not a recall.

    • SIL-3273 Apr 10, 2026 · Service Bulletin/Repair Instructions
      Altec has received notification from Parker Chelsea, the manufacturer, of an issue with some of their 281 and 890 Series PTOs. An unintended restriction in lubrication flow may produce elevated back pressure in cold-start scenarios, leading to partial engag…
    • SIL-3143 Jun 21, 2024 · Service Bulletin/Repair Instructions
      Altec has learned that a 12-volt Airtronics relay installed in the PDM could have been manufactured to an insufficient threshold on certain units built from December 2004 to October 2022. This can cause the relay to overheat and fail, causing the accessory …
    • SIL 3129 Jan 26, 2024 · Service Bulletin/Repair Instructions
      Altec has learned that the cap screws used to mount the planetary winch at the turntable could be shorter than specified on certain D3000A/B and D4000A/B units built from January 2012 to December 2015.
    • SIL 3068 Jun 28, 2023 · Service Bulletin/Repair Instructions
      Altec has learned that certain digger derricks and aerial devices of various models built from January 2010 to January 2023 may contain access steps with a handrail and side plate that come together in a small space causing a potential pinch point. Altec ha…
    • SIL-3052 Apr 28, 2023 · Service Bulletin/Repair Instructions
      Altec has learned that the hydraulic ball valve on the hydraulic reservoir return line of certain L42/45 M/P units built from February 2002 to November 2019 might not get returned to the open position after being turned to the closed position for maintenanc…
    • SIL 3033 Jan 19, 2023 · Service Bulletin/Repair Instructions
      Altec has learned that on certain AT37-G aerial devices built from November 2007 to April 2018, the rear torsion bar swing arm can interfere with the long runner channels under the body as the torsion bar rotates during road travel. The interference can cau…
    • PA713 Oct 5, 2022 · Service Bulletin/Repair Instructions
      Product advisory posted on our web site to inform owners, user, & operators that the new ANSI A92.2-2021 standard has taken effect and they must review. The standard has changed some of the responsibilities of the parties who use or operate vehicle mounted…
    • CSR-3012 Aug 4, 2022 · Service Bulletin/Repair Instructions
      Altec Industries, Inc. has received notification from Ford Motor Company that a condition exists relating to motor vehicle safety, compliance, or emissions in a vehicle you possess that is equipped with Altec equipment. In certain 2011 through 2013 and …
    • SIL 850 May 3, 2022 · Service Bulletin/Repair Instructions
      The body compartment wiring on certain Altec aerial devices, digger derricks, and body-only units built from 2014 to 2021 contains an in-line fuse located close to the lighting in the compartment, while other units are fused upstream, closer to the power so…
    • SIL 852 Apr 27, 2022 · Service Bulletin/Repair Instructions
      Altec has learned that the electrohydraulic outrigger/tools control valve on AA755L and A-series aerial devices and DLB, DMB, and D2/3/4000B series digger derricks could have the potential to produce a very small amount of flow into the lower tools circuit …
    • CSR 532 Mar 18, 2022 · Service Bulletin/Repair Instructions
      Altec Industries, Inc. has received notification from Navistar that a condition exists relating to motor vehicle safety, compliance, or emissions in a vehicle you possess that is equipped with Altec equipment. On certain trucks equipped with an automatic…
    • SIL 844 Feb 7, 2022 · Service Bulletin/Repair Instructions
      Altec has learned that there could be loose, missing, or incorrectly installed mounting fasteners on the electric power take-off (ePTO) on certain aerial devices built from 2015 to 2020 and equipped with a JEMS 18E20 hybrid system. This can cause the ePTO t…
    • PUN 2021D Nov 3, 2021 · Service Bulletin/Repair Instructions
      Altec has learned that the labeling describing the proper jump starting procedure for certain vehicles equipped with a Jobsite Energy Management System (JEMS) 2, 4, 6, or 12 built by Altec from 2015 to 2021 has sometimes been overlooked. Failure to follow t…
    • CSR 521 Aug 31, 2021 · Service Bulletin/Repair Instructions
      Fiat Chrysler Automobiles (FCA) US has decided that a defect that relates to motor vehicle safety exists on certain 2012 through 2020 model year (D2) Ram 3500 pickup, (DD) Ram 3500 cab chassis, and (DP) Ram 4500/5500 cab chassis vehicles. Refer to the incl…
    • SIL 798 Jul 28, 2021 · Service Bulletin/Repair Instructions
      On certain AT37/41/48 M/ME/P/PE/S/SE aerial devices built from June of 2015 to March of 2020 Altec requires the platform leveling bracket assembly to be inspected as described in the Inspection Procedure. If the inspection discovers any missing or damaged …
    • SIL 811-818 Jun 15, 2021 · Service Bulletin/Repair Instructions
      Altec has learned that certain AT35/37-G and AT40-G aerial devices built between February 2008 and January 2016 have power wiring for the 12V hydraulic oil reservoir heater which could be insufficient to carry the electrical current required to operate the …
    • SIL 783 Jan 29, 2021 · Service Bulletin/Repair Instructions
      Structural cracking has been observed where the primary leveling cylinder mounting pin is welded to the lower boom side plate on LS 40/45/55 aerial devices. Failure of this connection could disable the hydraulic platform leveling system. Altec has developed…
    • SIL 782 Jan 29, 2021 · Service Bulletin/Repair Instructions
      There may be inadequate weld fusion between the boom extension cylinder rod and rod end on the affected units. This can lead to failure of the weld. Altec has developed a process to have the cylinder rod end attachment repaired by the cylinder manufacturer.…
    • SIL 764 Jan 15, 2021 · Service Bulletin/Repair Instructions
      Altec has discovered that the protective fabric hose sock in the upper boom hose carrier on the affected units can become unsecured and slip out of place. This can expose the fiber optic lines to damage, resulting in intermittent operation or failure of the…
    • PUN 2020B Apr 10, 2020 · Service Bulletin/Repair Instructions
      Product Update Notice 2020B reminded customers that they may be unable to store necessary equipment in the body of the cutaway van without exceeding the rear axle capacity. For customers who are not satisfied with the remaining capacity of your vehicle, th…
    • SIL 721 Aug 21, 2019 · Service Bulletin/Repair Instructions
      SIL 721 informed unit owners of potential issues with JEMS units mounted on Dodge chassis Some customers have reported that the engine on the affected chassis will not start after sitting over a weekend time period. Investigation found there was an issue w…
    Source: NHTSA manufacturer communications files.
    About service bulletins