Model year

2016 Can-am Spyder F3

Motorcycle, gasoline, built in Canada. Owner complaints on file from May 7, 2017 to Jun 10, 2022.

Recall campaigns covering this model year130k vehicles or units across those campaigns
Owner complaints2Close to the median 2016 motorcycle
Severity index0.02016 motorcycles average 9.6
First 24 months1Complaints in its first two years
Complaints over time

Complaints about the 2016 Can-am Spyder F3 peaked in 2017, with 1 filed

Owner complaints about this model year, by the year they were filed with NHTSA.

00.250.50.75120171201820192020202120222023202420252026
Source: NHTSA ODI complaints file. The lighter column runs through October.
Components

50% of complaints about the 2016 Can-am Spyder F3 name brakes

Owner complaints by component. Hover or focus a bar for the crash, fire, injury or death count.

Brakes
1
Source: NHTSA ODI complaints file. A complaint can name more than one component; it is counted under the first.
Recalls

One recall campaign covers the 2016 Can-am Spyder F3

Check a specific vehicle by VIN on NHTSA's site: a campaign may cover only part of a model year's production.

Recall campaigns for the 2016 Can-am Spyder F3
CampaignFiledSubjectComponentVehiclesRemedy
22V-352May 18, 2022Front sprocket may be defective and prematurely wear, resulting in a loss of drive powerPowertrain30,389Part replacement
Source: NHTSA ODI recalls file.
Owner complaints

What owners reported about the 2016 Can-am Spyder F3

The full text of every complaint filed with NHTSA about this model year, newest first. Complaints are filed by owners and are not verified by NHTSA; NHTSA removes personal details before publishing.

2 complaints on file, page 1 of 1.

  1. Filed Jun 10, 2022Failure Oct 21, 2021Easley, SCUnknown or other

    2016 CanAm Spyder F3 Limited had a bad front sprocket. Began making noise & vibrating when on the road. Took it to the dealer & it was the front sprocket that is now under recall. I had the Spyder repaired at the cost of $465.46. I notified CanAm of my expenses to replace the sprocket & provided the bill from the dealer. They are refusing to now refund my expenses for the repair. They want to give me a credit towards CanAm products which I do not want any CanAm products. I want a refund for what I spent to fix the Spyder which is now under recall & the new sprocket will have to be replaced because it is also a defective sprocket.

    NHTSA complaint 11468576
  2. Filed May 7, 2017Failure May 6, 2017900 milesFlowery Branch, GAService brakes

    ON SATURDAY MAY 6, 2017 I TEST DROVE A 2016 CAN AM SPYDER F3. IT WAS A CLEAR, BUT CHILLY AND WINDY DAY IN NORTH EAST GEORGIA. I HAD PREARRANGED A TEST RIDE WITH MOUNTAIN MOTORSPORTS IN BUFORD, GA. THE MACHINE WAS PREVIOUSLY OWNED, BUT HAD LESS THAN 1000 MILES ON THE ODOMETER. THE ISSUE: WHILE TRAVELING IN THE RIGHT-MOST LANE IN I 85 NORTH, ON CRUISE CONTROL AND TRAVELING AT APPROXIMATELY 69 MPH, THE TRAFFIC WELL AHEAD OF ME STARTED TO SLOW DOWN. I IMMEDIATELY DISENGAGED THE CRUISE CONTROL AND BEGAN TO COAST THE MACHINE. I THEN NOTICED THE TRAFFIC AHEAD OF ME WAS STOPPED. I REACHED WITH MY RIGHT FOOT TO DEPRESS THE BRAKE PEDAL. I COULD NOT 'FIND' THE BRAKE PEDAL. AT THIS POINT THE TRAFFIC AHEAD OF ME WAS STOPPED AND I WAS FORCED TO TAKE EVASIVE MANEUVERS. I BEGAN TO DOWNSHIFT FRANTICALLY AND ENTERED THE EMERGENCY SHOULDER ON THE RIGHT OF I 85. I SUCCESSFULLY PASSED SEVERAL VEHICLES ON THE RIGHT WHILE IN THE EMERGENCY SHOULDER LANE. //THANKFULLY, I WAS ABLE TO SUCCESSFULLY BRING THE MACHINE ALL THE WAY DOWN TO 1ST GEAR AND LESS THAN 10 MPH WITHOUT STRIKING ANY VEHICLES OR OTHER OBJECTS. //AFTER STOPPING IN THE EMERGENCY SHOULDER AND GATHERING MY COMPOSURE, I LOOKED DOWN AT THE BRAKE PEDAL. I NOTICED THAT IT HAD FLIPPED BACK (UPSIDE DOWN) AND WAS INOPERABLE. //AFTER SUCCESSFULLY GETTING THE VEHICLE TO REST AGAINST A CURB IN A CONVENIENCE STORE PARKING LOT, I INVESTIGATED THE BRAKE ISSUE MORE CLOSELY. SEE ATTACHED PICS! //AS YOU SHOULD BE AWARE, THIS SINGLE POINT OF FAILURE RENDERS THE BRAKES ON THE MACHINE COMPLETELY INOPERABLE AND LEAVES THE OPERATOR AT EXTREME RISK! //HAD I BEEN HEADING INTO A BUSY INTERSECTION, OR TRAVERSING A SERIOUS CURVE OR ANY NUMBER OF OTHER REAL, ON-ROAD SCENARIOS, I CANNOT IMAGINE WHAT COULD HAVE HAPPENED? I AM ONLY HAPPY TO BE ALIVE AND NOT INJURED!

    NHTSA complaint 10983890
Source: NHTSA ODI complaints file.
Investigations

NHTSA has not opened an investigation on this model year

Source: NHTSA ODI investigations file.
Service bulletins

17 manufacturer communications cover this model year

Technical service bulletins and other notices the manufacturer sent to dealers. A bulletin is not a recall.

  • TST 143615 Mar 2, 2025 · Service Bulletin/Repair Instructions
    The front sprocket might be stuck on the mainshaft upon disassembly
  • TST 140875 Rev Mar 18, 2024 · Service Bulletin/Repair Instructions
    Revision of TST 140875 P0730 Active Fault Fault code can be triggered if the unit has the wrong rear sprocket or a different wheel size. The cluster will stop displaying the gear indication and check engine light came on (limp home condition) and th…
  • TST 134170 Mar 26, 2024 · Service Bulletin/Repair Instructions
    Engine Oil Level reading Issue Impossible to read the oil level on the dipstick.
  • TST 140875 Jan 23, 2023 · Service Bulletin/Repair Instructions
    Spyder P0730 Active Fault - This fault code can be triggered if the unit has the wrong rear sprocket or a different wheel size. The cluster will stop displaying the gear indication and check engine light came on (limp home condition) and the gearbox won't s…
  • TST 140654 Dec 6, 2022 · Service Bulletin/Repair Instructions
    Missing or damaged scavenge pump components could lead to poor engine performance on 1330 engines.
  • Bulletin 2019-11 Jun 30, 2022 · Service Bulletin/Repair Instructions
    Front Sprocket Wear- Interim Solution As covered in the SAFETY CAMPAIGN BULLETIN 2019-10, The front sprocket may be defective and may be subject to premature wear.
  • Bulletin 2019-10 May 26, 2022 · Service Bulletin/Repair Instructions
    Safety Campaign- Front Sprocket Wear- Potential Loss of Propulsion The front sprocket may be defective and may be subject to premature wear. Over time, the vehicle could lose propulsion. If the vehicle loses propulsion, there is an increased risk of a crash.
  • F3-123018 Jan 5, 2016 · Service Bulletin/Repair Instructions
    Oil pressure switch switch connector boot cracking.
  • WCN61Y016 May 6, 2016 · Service Bulletin/Repair Instructions
    Relay terminals could be damaged at fuse boxes.
  • D2-8316 Aug 3, 2016 · Service Bulletin/Repair Instructions
    Sticking throttle.
  • Article Radio 10 Oct 22, 2013 · Service Bulletin/Repair Instructions
    If a customer wants to change the radio pre-set channel number and is unable to do so, here is the reason this is happening.
  • D122791 Apr 12, 2015 · Service Bulletin/Repair Instructions
    Clutch assist installation.
  • D109338 Apr 12, 2014 · Service Bulletin/Repair Instructions
    Trailer module may fail.
  • A117219 Nov 5, 2015 · Service Bulletin/Repair Instructions
    Details on the f3 rear suspension and available options.
  • PAC 2016-4 Jan 29, 2020 · Service Bulletin/Repair Instructions
    Revision 1 of Bulletin 2016-4 The pillion switch is not activated when a passenger is on the seat. This situation may results in a loss of control and possibly cause injuries or even death.
  • 2016-3 Jun 7, 2016 · Service Bulletin/Repair Instructions
    POSTING ABOUT NEW BULLETIN 2016-3 -SOME THROTTLE GRIPS ASSEMBLY MAY HAVE TIGHTER MATERIALS TOLERANCES THAT MAY INCREASE RETURN TIME TO ORIGINAL POSITION
  • 115 Oct 27, 2011 · Service Bulletin/Repair Instructions
    STICKING THROTTLE ON 2016 RT AND F3S. THROTTLE WILL NOT RETURN TO CLOSED POSITION. 1. MULTIFUNCTION SWITCH HOUSING MAY INTERFERE WITH THROTTLE LUBE. 2. THROLTTLE SECONDARY SPRING MAY BIND WITH BUSHING.
Source: NHTSA manufacturer communications files.