Model year

2024 International HV

Body and fuel not decoded. Owner complaints on file from no date to no date.

Recall campaigns covering this model year6194k vehicles or units across those campaigns
Owner complaints0Not enough peers on file
Severity indexNoneCrash, fire, injury or death per 100
First 24 months0Complaints in its first two years
Complaints over time

Complaints about the 2024 International HV by year filed

Owner complaints about this model year, by the year they were filed with NHTSA.

No campaigns match these filters.Reset filters
Source: NHTSA ODI complaints file. The lighter column runs through October.
Components

Complaints by component

Owner complaints by component. Hover or focus a bar for the crash, fire, injury or death count.

No campaigns match these filters.Reset filters
Source: NHTSA ODI complaints file. A complaint can name more than one component; it is counted under the first.
Recalls

6 recall campaigns cover the 2024 International HV

Check a specific vehicle by VIN on NHTSA's site: a campaign may cover only part of a model year's production.

Recall campaigns for the 2024 International HV
CampaignFiledSubjectComponentVehiclesRemedy
25V-178Mar 21, 2025Caliper may contact a suspension spring or axle U-bolt and prevent the outer brake pad from functioningBrakes153Part replacement
24V-818Oct 31, 2024Electrical noise and low signal to the power line carrier may cause the ECU to incorrectly process commands or stop workingElectrical system105,276Software update
24V-088Feb 8, 2024Steering gear assemblies may have been assembled incorrectly with fewer recirculating balls than are required, which may result in a loss of…Steering893Part replacement
24V-026Jan 18, 2024Driver's seat belt tether bolt may not be properly seated in the anchor, causing a bind at the anchor pointSeat belts297Part replacement
23V-370May 25, 2023Anti-lock brake system (ABS) indicator light does not remain illuminated when a malfunction exists, and when the vehicle's ignition switch is on,…Brakes59,684Software update
23V-120Feb 23, 2023When the parking brake is applied, the automatic transmission is still in drive or reverse position, and the stationary power take-off (PTO)…Engine and cooling27,972Software update
Source: NHTSA ODI recalls file.
Owner complaints

What owners reported about the 2024 International HV

The full text of every complaint filed with NHTSA about this model year, newest first. Complaints are filed by owners and are not verified by NHTSA; NHTSA removes personal details before publishing.

0 complaints on file.

    Source: NHTSA ODI complaints file.
    Investigations

    NHTSA has not opened an investigation on this model year

    Source: NHTSA ODI investigations file.
    Service bulletins

    88 manufacturer communications cover this model year

    Technical service bulletins and other notices the manufacturer sent to dealers. A bulletin is not a recall; the 60 most recent are listed.

    • IK1201526 Jul 2, 2026 · Service Bulletin/Repair Instructions
      This document will guide the user through the parts and information related to A26B resonator removal and EGR cross-over tube installation.
    • IK4300031 Jun 16, 2026 · Service Bulletin/Repair Instructions
      This document will provide information regarding certain approved S13 and T14 chemicals.
    • IK1201518 Jun 26, 2026 · Service Bulletin/Repair Instructions
      Some low mileage S13 engines in HV and HX chassis may experience complaints of excess fan belt noise or chirping, and or belt edge fraying. This document will guide the user through troubleshooting and Installation of the required parts needed to correct th…
    • IK1201506 Jun 23, 2026 · Service Bulletin/Repair Instructions
      This document will guide the user through to inspect A26 turbochargers remanufactured by SRC between 05/01/2023 and 02/01/2025. SRC Turbochargers assembled with new compressor housings may have a defect that prevents the TCOT sensor (Part# 1845988C1, Senso…
    • IK0800560 Jun 9, 2026 · Service Bulletin/Repair Instructions
      This document will guide the user through the changes of the dielectric grease/coatings used in certain areas on all International vehicles built after 1/8/2018. International's Electrical Engineering Team made this change to improve the longevity of the OE…
    • IK1201516 May 21, 2026 · Service Bulletin/Repair Instructions
      This document will guide the user through parts information and installation instructions for the IMP Isolation Kit.
    • 26101 May 22, 2026 · Service Campaign
      Certain International® trucks and IC BusTM CE Series buses may have out of date BCM programing that may cause erroneous fault codes after a vehicle sits for 2 or 3 days.
    • IK2800082 Apr 29, 2026 · Service Bulletin/Repair Instructions
      VIN and Incomplete Vehicle Document Label Replacement Procedure
    • IK2700129 Apr 23, 2026 · Service Bulletin/Repair Instructions
      This article provides step-by-step guidance for troubleshooting issues with Techline Connect software.
    • IK1201514 May 1, 2026 · Service Bulletin/Repair Instructions
      This document provides instructions for sealing oil leakage past the flywheel bolt holes on S13 engines. Oil leaking from behind the crankshaft gear may exit through the flywheel bolt holes and is often misdiagnosed as a rear crankshaft seal leak. This cond…
    • IK2600255 Apr 23, 2026 · Service Bulletin/Repair Instructions
      This document provides guidance for assessing the feasibility of implementing a customer-requested change to an engine or vehicle parameter/feature. Customer requested changes will be approved in accordance with the requirements specified in 40 CFR Part 103…
    • 26101 Apr 7, 2026 · Service Campaign
      Certain International® trucks and IC BusTM CE Series buses may have out of date BCM programing that may cause erroneous fault codes after a vehicle sits for 2 or 3 days.
    • IK4300031 Mar 24, 2026 · Service Bulletin/Repair Instructions
      This document will provide information regarding certain approved S13 and T14 chemicals.
    • IK3100005 Mar 11, 2026 · Emissions
      This article will provide the calibration revision history for S13 Integrated EPA 2024 Powertrains.
    • IK0800677 Mar 2, 2026 · Service Bulletin/Repair Instructions
      This document is intended to provide supplemental information for concerns with brake light switches and pressure sensors used by the BCM and PIM module to determine if the operator of the vehicle is applying the service brakes. All S13 vehicles are equippe…
    • IK1201505 Feb 24, 2026 · Service Bulletin/Repair Instructions
      This article is to walk through and assist the technician in diagnosing and repairing some of the known leaks around the S13 Integrated Powertrain.
    • IK0800684 Feb 13, 2026 · Service Bulletin/Repair Instructions
      This document is to inform dealers, customers, and body builders/TEMs of a known BCM software issue with kernels 747 through 752. Units built after November of 2024 as well as older units that were updated with DLB between 11/5/2024 and 6/26/2025 with Remo…
    • IK4300035 Feb 3, 2026 · Service Bulletin/Repair Instructions
      This tool is designed to compare Diamond Logic feature data across multiple vehicle configuration files. It allows users to quickly load files either manually or directly from the Diamond Logic Builder Vehicles folder using VIN-based selection. As files are…
    • IK2600264 Jan 5, 2026 · Service Bulletin/Repair Instructions
      This document provides instructions for the programming changes that will be needed when performing an S13 engine swap.
    • IK2600255 Jan 26, 2026 · Other
      This document provides guidance for assessing the feasibility of implementing a customer-requested change to an engine or vehicle parameter/feature. Customer requested changes will be approved in accordance with the requirements specified in 40 CFR Part 103…
    • IK2600090 Feb 5, 2026 · Other
      New CARB Idle Reduction Change Request
    • IK2600047 Jan 2, 2026 · Service Bulletin/Repair Instructions
      Engine replacements for all International engines will need to follow this procedure.
    • IK2600279 Dec 19, 2025 · Service Bulletin/Repair Instructions
      This document provides: Steps to take when switch pack programming fails, or when switch pack disappears after body control module update Sample scenarios Additional information to assist readers in understanding DLB switch pack programming
    • IK1600272 Dec 19, 2025 · Service Bulletin/Repair Instructions
      This document will guide the user through a step-by-step procedure for detecting water leaks in vehicle cabs and windshields using an ultrasonic sound detector.
    • IK0800677 Dec 10, 2025 · Service Bulletin/Repair Instructions
      This document is intended to provide supplemental information for concerns with brake light switches and pressure sensors used by the BCM and PIM module to determine if the operator of the vehicle is applying the service brakes. All S13 vehicles are equipp…
    • IK1201009 Nov 6, 2025 · Service Bulletin/Repair Instructions
      In some geographic areas, ambient temperatures reaching below 15°F (-10 °C), including high levels of humidity, an operator may experience engine stalling, low performance, and or poor aftertreatment performance. This is caused by condensation accumulating …
    • IK0800689 Nov 21, 2025 · Service Bulletin/Repair Instructions
      In some instances, the driver's or passenger's door pod may become unresponsive, where it will not respond to any manual inputs from the driver or passenger. In some of these situations, it is possible for this symptom to be present without any fault codes …
    • IK0800688 Nov 5, 2025 · Service Bulletin/Repair Instructions
      This document is to notify the field of an issue with BCM that causes various electrical system concerns after the vehicle sits for 2-3 days. This can affect all LT, RH, MV, HV models, 2021MY and up HX, 2024MY and up CE Bus with BCM kernel version 752, 753,…
    • IK0600030 Dec 5, 2025 · Service Bulletin/Repair Instructions
      This document will guide the user through understanding Prop Shaft Codes and understanding the variations of prop codes. (Metric Prop codes start with the number a 4 and Non metric Prop codes start with a 2.)
    • IK3400001 Aug 28, 2025 · Service Bulletin/Repair Instructions
      Title: Service Portal iKNow Feedback Case Types Applies To: All
    • IK1400005 Aug 25, 2025 · Service Bulletin/Repair Instructions
      Title: Driveline Information Center and Troubleshooting Procedures Applies To: All Vehicles
    • IK1900022 Jul 18, 2025 · Service Bulletin/Repair Instructions
      Title: A/C Refrigerant and Oil Capacities Applies To: All current models
    • IK1200716 Jul 7, 2025 · Service Bulletin/Repair Instructions
      Title: Engine Emission Label Replacement, Certificate of Conformance and Clean Idle Sticker Addition Procedure Applies To: All Navistar Powered Trucks Requesting Engine Emission Label Replacement, Certificate of Conformance and/or Clean Idle Sticker, Clean …
    • IK0900157 Jul 17, 2025 · Service Bulletin/Repair Instructions
      Title: Fan belt replacement guidelines for frayed edges Applies To: All Models
    • IK1201519 Jun 24, 2025 · Service Bulletin/Repair Instructions
      Title: Replacing the Crankshaft Gear on S13 Engines
    • IK0800684 Jun 27, 2025 · Service Bulletin/Repair Instructions
      Title: Erratic BCM and RPM Behavior with Kernel 747-752 Applies To: All MV, HV, HX with RPM modules
    • IK1201511 May 11, 2025 · Service Bulletin/Repair Instructions
      Title: Supplemental A26 MAF Fault Diagnostics Applies To: All A26 Engines
    • IK0500054 Jun 4, 2025 · Service Bulletin/Repair Instructions
      Title: Steering Gear Seal Repair Guidelines Applies To: Steering gears
    • IK2600069 May 20, 2025 · Service Bulletin/Repair Instructions
      Title: How to Request a Horsepower Quote Applies To: All International and Cummins Electronic engines
    • IK0300078 May 9, 2025 · Service Bulletin/Repair Instructions
      This document reminds technicians of the critical relationship between the truck's suspension and the driveline operating angles. The information applies to diesel, gas, and electric vehicles.
    • IK1200716 Apr 24, 2025 · Emissions
      Applies To: All Navistar Powered Trucks Requesting Engine Emission Label Replacement, Certificate of Conformance and/or Clean Idle Sticker, Clean Truck Check
    • IK1201505 Apr 24, 2025 · Service Bulletin/Repair Instructions
      Title: S13 Integrated Powertrain Known Leaks
    • IK1300194 Apr 10, 2025 · Service Bulletin/Repair Instructions
      Title: S13/T14 Transmission Cooler Pipe or Clamp Leak Troubleshooting and Repairs
    • IK2600264 Apr 10, 2025 · Service Bulletin/Repair Instructions
      : Programming Instructions For S13 Engine Swaps
    • IK2600279 Apr 29, 2025 · Service Bulletin/Repair Instructions
      Switch Pack Programming Troubleshooting Information
    • 24116R1 Apr 14, 2025 · Service Campaign
      Updates to Labor Information section.
    • IK0900156 Mar 7, 2025 · Service Bulletin/Repair Instructions
      Title: Connecting an Auxiliary APU to the S13 Coolant System
    • IK1201511 Mar 26, 2025 · Service Bulletin/Repair Instructions
      Title: Supplemental A26 MAF Fault Diagnostics
    • IK1201507 Feb 26, 2025 · Service Bulletin/Repair Instructions
      Title: S13 Leaks at the Coolant Return Pipe Hose Clamps
    • IK0800676 Jan 21, 2025 · Service Bulletin/Repair Instructions
      This document will guide the user through inspecting the shark fin antenna cable for rubbing/chafing at the mounting hardware. In some cases, cable damage has been seen where the antenna cables pass over the mounting hardware. This cable damage can cause th…
    • 24116 Jan 14, 2025 · Service Bulletin/Repair Instructions
      Certain International® HV™, HX®, and MV™ Series trucks were converted from C-loop mirrors to pedestal mounted mirrors. Some of the unused holes during the conversion may have hardware improperly installed.
    • IK1400023 Oct 8, 2024 · Service Bulletin/Repair Instructions
      This article addresses chassis lean conditions on all chassis. This does not include any diagnostics for body leans such as a cab lean. Keep in mind that a chassis lean may cause or accentuate a cab lean. Filling out the printable form and using the notes i…
    • IK1400023 Sep 24, 2024 · Service Bulletin/Repair Instructions
      This article addresses chassis lean conditions on all chassis. This does not include any diagnostics for body leans such as a cab lean. Keep in mind that a chassis lean may cause or accentuate a cab lean. Filling out the printable form and using the notes i…
    • IK1600270 Aug 16, 2024 · Service Bulletin/Repair Instructions
      This document will guide the user through installing the upper mounting hardware in place of the missing C-Loop and/or look down mirrors.
    • iK1500095 Jul 2, 2024 · Service Bulletin/Repair Instructions
      This document will provide the user with cleaning options and procedures for aluminum bright work parts that become stained or tarnished.
    • Emission Recall 23519 Jul 2, 2024 · Emissions
      The Exhaust Gas Sensor In-Use Monitor Performance Ratio (IUMPR) may operate below the prescribed standard.
    • IK0200025 Apr 2, 2024 · Service Bulletin/Repair Instructions
      This document will guide the user to inspect oil pan for any sign of damage that could potentially be created by the front axle set screw
    • IK0400037 Apr 29, 2024 · Service Bulletin/Repair Instructions
      This document is to guide users to eliminate brake pedal rattle noise.
    • IK08000403 Apr 24, 2024 · Service Bulletin/Repair Instructions
      This document details the procedure that must be followed to ensure proper alternator troubleshooting.
    • IK0800503 Feb 21, 2024 · Service Bulletin/Repair Instructions
      Cummins ISB Starting system diagnostics.
    Source: NHTSA manufacturer communications files.