Manufacturer profile

Maintainer of Iowa

Maintainer of Iowa has filed 11 recall campaigns with NHTSA since 2018, covering 1,227 vehicles or units by the manufacturer's own estimates.

Campaigns filed in 2026 to date0No campaigns in 2025
Vehicles affected02026 to date
Campaigns on file112018 to 2023
Do-not-drive or park-outside0Campaigns with an advisory

Filed under the name "Maintainer Corporation of Iowa, Inc.".

Campaigns per year

Maintainer of Iowa has averaged 1 campaigns a year since 2021, below its 2019 peak of 4

Maintainer of Iowa recall campaigns by report date, 2018 to 2026. 2026 runs through October.

012342018201942020202120222023202420252026
Source: NHTSA ODI recalls file. The lighter column is a partial year.
Components

Equipment is Maintainer of Iowa's most recalled component since 2018

Maintainer of Iowa campaigns by primary component, 2018 to 2026.

Equipment
4
Electrical system
2
Lighting
2
Brakes
2
Steering
1
Source: NHTSA ODI. Each campaign counted once.
Remedy type

Maintainer of Iowa uses software fixes less than the industry: 0% of its 2019 campaigns

Share of campaigns remedied by a software update, Maintainer of Iowa against all manufacturers, by year.

Maintainer of IowaAll manufacturers
050%100%201820192020202120222023202420252026100%18%
Source: NHTSA ODI remedy descriptions, classified by rule (see Methodology).
Model years covered

Model year 2019 is covered by the most Maintainer of Iowa campaigns, 6

Maintainer of Iowa campaigns covering each model year, last fifteen model years. A campaign counts once for each year it covers.

0246201520172018201962020202120222023
Source: NHTSA ODI recalls file.
Latest campaigns

The latest Maintainer of Iowa filings

The ten most recent campaigns, by report date.

Latest Maintainer of Iowa campaigns
CampaignFiledSubjectComponentVehiclesRemedy
23V-057Feb 7, 2023During crane operation, if power gets disconnected to the receiver on the Maintainer crane, the crane may continue to move without control of the userEquipment1,120Software update
22V-139Mar 9, 2022Output inductor may contact the frame of the Enpak, causing an electric arcElectrical system17Repair or modification
22V-074Feb 9, 2022Sheetmetal guard inside the auxiliary power unit may have been installed incorrectly, allowing a belt to contact and damage a power cable or…Electrical system17Part replacement
21V-518Jul 8, 2021Crane mounting bolts are not long enough to securely attach the crane to the crane mountEquipment7Part replacement
21V-503Jul 1, 2021All-in-one rear LED lights may be too bright, exceeding the maximum light output allowed which may adversely affect the vision of driversLighting1Not stated
20V-261May 8, 2020PTOs were installed incorrectly and as a result, the attachment hardware may loosen over timeEquipment16Repair or modification
19V-898Dec 18, 2019Air pressure control lines may not be pressure-protectedBrakes3Inspection
19V-894Dec 16, 2019Front shocks may separate from their upper mount on the front suspensionSteering1Repair or modification
19V-890Dec 12, 2019Brake relay valve may have an air flow restriction, which may result in an extended stopping distanceBrakes1Part replacement
19V-155Mar 1, 2019Depending on the specific wiring of the vehicle, these brake lights may illuminate when the brake pedal has not been pressedLighting12Part replacement
Source: NHTSA ODI.
Largest campaigns

Maintainer of Iowa's five largest campaigns on file

Vehicles or units affected, millions, any year.

  1. 2023 During crane operation, if power gets…0.00M
  2. 2018 These vehicles have a FORCE America…0.00M
  3. 2022 Output inductor may contact the frame of…0.00M
  4. 2022 Sheetmetal guard inside the auxiliary power…0.00M
  5. 2020 PTOs were installed incorrectly and as a…0.00M
Source: NHTSA ODI.