| 24V-758 | Oct 11, 2024 | Emergency exit label operating instructions lettering is too small and may be difficult to read | Equipment | 28,479 | Part replacement |
| 24V-599 | Aug 12, 2024 | Coating on the fuel lines may have been improperly applied, which can result in a fuel leak | Fuel system | 8,294 | Part replacement |
| 24V-543 | Jul 19, 2024 | Exterior roof joint may have been manufactured with insufficient strength that can allow the roof panels to separate in a crash | Structure | 16,708 | Repair or modification |
| 24V-078 | Feb 7, 2024 | Convertible seats may have been incorrectly installed, which can result in an unsecured seat | Seats | 6,691 | Repair or modification |
| 23V-276 | Apr 18, 2023 | System Control Module (SCM) may activate the anti-rollback feature, causing the vehicle to reverse faster than expected when the vehicle is in… | Powertrain | 419 | Software update |
| 22V-736 | Oct 4, 2022 | LPG supply line may be damaged from contact with the RH park brake cable, which can result in a fuel leak | Fuel system | 66 | Repair or modification |
| 22V-579 | Aug 4, 2022 | Zinc-plating on the fuel return line may break away when contacted by road debris, causing two dissimilar metals on the fuel line to contact each… | Fuel system | 4,900 | Part replacement |
| 22V-578 | Aug 4, 2022 | Zinc-plating on the fuel return line may break away when contacted by road debris, causing two dissimilar metals on the fuel line to contact each… | Fuel system | 49 | Part replacement |
| 22V-505 | Jul 14, 2022 | Air compressor housing is improperly grounded, causing electrical voltage greater than 50V AC during operation | Electrical system | 482 | Repair or modification |
| 21V-300 | Apr 28, 2021 | Drivetrain may experience an electromagnetic noise on the Control Area Network (CAN) bus, which may cause a loss of electrical power to the power… | Powertrain | 302 | Part replacement |
| 21V-284 | Apr 22, 2021 | Retainer was not properly seated in the SC-3 single check valve and may not provide source air isolation when pressure is applied | Brakes | 1,634 | Part replacement |
| 21V-253 | Apr 12, 2021 | Electric drive train cannot detect isolation faults when the high voltage contactors are closed | Electrical system | 292 | Software update |
| 21V-070 | Feb 12, 2021 | Seats with integrated 3-point seat belts may have been installed incorrectly | Seat belts | 620 | Repair or modification |
| 20V-409 | Jul 15, 2020 | Three-point seatbelt assembly may have been installed without reinforcing washers under the floor at the anchorage point, possibly preventing the… | Seat belts | 3,532 | Repair or modification |
| 20V-357 | Jun 15, 2020 | Castle nuts that connect the steering drag link to the steering arm may have not been correctly tightened, potentially causing separation of the… | Steering | 11 | Repair or modification |
| 20V-356 | Jun 15, 2020 | Castle nuts used to connect the steering drag link to the steering arm may have not been correctly tightened, potentially causing separation of… | Steering | 1,471 | Repair or modification |
| 20V-266 | May 12, 2020 | A/C circuit breaker may have been installed incorrectly | Electrical system | 1,239 | Part replacement |
| 20V-258 | May 8, 2020 | Foot pedal parking brake assembly may have been improperly assembled possibly resulting in a failure to hold the vehicle stationary on an incline… | Brakes | 1,585 | Repair or modification |
| 20V-249 | May 5, 2020 | Due to improper routing of the parking brake cables, the parking brake cable may contact and chafe the gasoline fuel line, potentially causing a… | Fuel system | 352 | Repair or modification |
| 20V-234 | Apr 27, 2020 | Floor-mounted parking brake may fail to hold the vehicle stationary on an incline when the vehicle is loaded to its maximum weight, due to an… | Brakes | 2,264 | Inspection |
| 20V-125 | Mar 3, 2020 | Seat barrier behind the driver seat with an integrated 3-point seat belt may have been installed incorrectly and may be missing the reinforcing… | Seats | 2,790 | Repair or modification |
| 19V-795 | Nov 6, 2019 | Brake light switch mounting bracket may have caused the brake light switch to be incorrectly adjusted at installation and/or the brake light… | Lighting | 12,835 | Repair or modification |
| 19V-707 | Oct 4, 2019 | Insufficient number of rivets were installed in the roof sheets, allowing the roof sheets to separate in the event of a severe impact | Structure | 302 | Inspection |
| 19V-526 | Jul 12, 2019 | Due to a manufacturing issue, the roof hatch external handle may unexpectedly break under reasonable use | Structure | 1,737 | Part replacement |
| 19V-524 | Jul 12, 2019 | Due to a manufacturing issue, the roof hatch external handle may unexpectedly break under reasonable use | Structure | 13 | Part replacement |
| 19V-391 | May 24, 2019 | Driver side rear brakes may drag | Brakes | 4,218 | Repair or modification |
| 18V-884 | Dec 12, 2018 | Hydraulic brake lines or transmission shifter cable may have been improperly routed, causing the brake line to be exposed to excessive heat, and… | Powertrain | 5,169 | Repair or modification |
| 18V-846 | Nov 28, 2018 | There may be an insufficient number of bolts attaching the seat to the bus floor, allowing the seat to detach from the bus floor in the event of a… | Seats | 12 | Repair or modification |
| 18V-566 | Aug 28, 2018 | These seats may be missing a warning label on the lower restraint strap | Equipment | 551 | Repair or modification |