Model year

2016 Lexus IS

Sedan, gasoline, 4x2, built in Japan. Owner complaints on file from Aug 4, 2024 to Mar 23, 2026.

Recall campaigns covering this model year0No recall campaign lists this model year
Owner complaints2Below the median 2016 sedan
Severity index0.02016 sedans average 7.1
First 24 months0Complaints in its first two years
Complaints over time

Complaints about the 2016 Lexus IS peaked in 2024, with 1 filed

Owner complaints about this model year, by the year they were filed with NHTSA.

00.250.50.7512024120252026
Source: NHTSA ODI complaints file. The lighter column runs through October.
Components

100% of complaints about the 2016 Lexus IS name fuel system

Owner complaints by component. Hover or focus a bar for the crash, fire, injury or death count.

Fuel system
2
Source: NHTSA ODI complaints file. A complaint can name more than one component; it is counted under the first.
Recalls

No recall campaign lists the 2016 Lexus IS

Check a specific vehicle by VIN on NHTSA's site: a campaign may cover only part of a model year's production.

Source: NHTSA ODI recalls file.
Owner complaints

What owners reported about the 2016 Lexus IS

The full text of every complaint filed with NHTSA about this model year, newest first. Complaints are filed by owners and are not verified by NHTSA; NHTSA removes personal details before publishing.

2 complaints on file, page 1 of 1.

  1. Filed Mar 23, 2026Failure Mar 21, 2026Van Buren, ARFuel/propulsion system

    When I start my car, every once in a while it acts as if it is not getting enough gas and lags. In the colder months it seems to do this more often and sometimes will not start. When the weather is warmer it will sporadically do this. I have put a new battery in thinking it was weak and this could be the cause for it to not want to start, but it has done this at least 5 times within the month that the battery was replaced. My VIN is not showing a recall for the fuel pump like the other 2016 IS200t models, but I’m afraid that this is the recall problem. What should I do if my mechanic says it is the fuel pump? Will it get replaced under the recall?

    NHTSA complaint 11726260
  2. Filed Aug 4, 2024Failure Aug 1, 2024Inverness, FLFuel/propulsion system

    Car keeps randomly dying out while driving sometimes it comes back on sometimes It has to pull over and start the car again has a lean code pretty sure its the fuel pump noticed they have a recall on other is200t for fuel pump issues believe mine should Definitely been part of the recall it's very dangerous when it dies on the highway

    NHTSA complaint 11606375
Source: NHTSA ODI complaints file.
Investigations

NHTSA has not opened an investigation on this model year

Source: NHTSA ODI investigations file.
Service bulletins

23 manufacturer communications cover this model year

Technical service bulletins and other notices the manufacturer sent to dealers. A bulletin is not a recall.

  • L-SB-0030-24 Rev2 Dec 15, 2025 · Service Bulletin/Repair Instructions
    Some 2005 – 2026 Lexus vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to…
  • L-SB-0043-23 Rev1 Jun 13, 2025 · Service Bulletin/Repair Instructions
    The air conditioning dye injection tool kit has been developed to aid in identifying the location of air conditioning refrigerant leaks. The procedures outlined in this Service Bulletin aid in locating, inspecting, and repairing refrigerant leaks.
  • L-SB-0017-19 Rev1 Feb 7, 2025 · Service Bulletin/Repair Instructions
    Some 2010 – 2026 model year Lexus vehicles may exhibit paint stains after the removal of Rapgard™. The paint stains may appear to be under the clear coat but are usually under wrinkles in the Rapgard™. The wrinkles may trap water and cause the paint to stai…
  • L-SB-0017-19 Rev1 Feb 7, 2025 · Service Bulletin/Repair Instructions
    Some 2010 – 2026 model year Lexus vehicles may exhibit paint stains after the removal of Rapgard™. The paint stains may appear to be under the clear coat but are usually under wrinkles in the Rapgard™. The wrinkles may trap water and cause the paint to stai…
  • L-SB-0030-24 Rev1 Jul 29, 2024 · Service Bulletin/Repair Instructions
    Some 2005 – 2024 Lexus vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to…
  • L-SB-0007-21 Rev2 Jul 2, 2024 · Service Bulletin/Repair Instructions
    Some 2015 – 2017 model year NX 200t, 2016 – 2017 model year GS 200t, IS 200t, and RC 200t, 2018 – 2019 model year GS 300, and 2018 – 2021 model year NX 300, and 2018 – 2024 model year IS 300 and RC 300 vehicles equipped with an 8AR-FTS engine may exhibit a …
  • L-SB-0030-24 Rev1 Jul 29, 2024 · Service Bulletin/Repair Instructions
    Some 2005 – 2024 Lexus vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to…
  • L-SB-0007-21 Rev2 Jul 2, 2024 · Service Bulletin/Repair Instructions
    Some 2015 – 2017 model year NX 200t, 2016 – 2017 model year GS 200t, IS 200t, and RC 200t, 2018 – 2019 model year GS 300, and 2018 – 2021 model year NX 300, and 2018 – 2024 model year IS 300 and RC 300 vehicles equipped with an 8AR-FTS engine may exhibit a …
  • L-SB-0030-24 Jun 21, 2024 · Service Bulletin/Repair Instructions
    Some 2005 – 2024 Lexus vehicles that have undergone water intrusion may exhibit a condition in which a musty smell is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is t…
  • L-SB-0030-24 Jun 21, 2024 · Service Bulletin/Repair Instructions
    Some 2005 – 2024 Lexus vehicles that have undergone water intrusion may exhibit a condition in which a musty smell is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is t…
  • L-SB-0023-24 Apr 19, 2024 · Service Bulletin/Repair Instructions
    To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before…
  • L-SB-0024-24 Apr 19, 2024 · Service Bulletin/Repair Instructions
    The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especi…
  • L-SB-0022-24 Apr 19, 2024 · Service Bulletin/Repair Instructions
    Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and deckl…
  • L-SB-0021-24 Apr 19, 2024 · Service Bulletin/Repair Instructions
    Lexus vehicles are currently protected with RapgardTM protective film designed to protect the horizontal painted surfaces. This material protects from acid rain, environmental fallout, and rail contamination. Follow the Removal Procedure in this bulletin to…
  • L-SB-0020-24 Apr 19, 2024 · Service Bulletin/Repair Instructions
    Vehicles may occasionally be subjected to contamination by airborne iron particles shed from railroad tracks, train wheels, exposure to heavy machinery facilities, grinding, welding, etc. This type of contamination can be identified by the presence of small…
  • L-SB-0007-21 Rev1 Apr 17, 2024 · Service Bulletin/Repair Instructions
    Some 2015 – 2017 model year NX 200t, 2016 – 2017 model year GS 200t, IS 200t, and RC 200t, 2018 – 2019 model year GS 300, and 2018 – 2021 model year NX 300, and 2018 – 2024 model year IS 300 and RC 300 vehicles equipped with an 8AR-FTS engine may exhibit a …
  • L-SB-0023-24 Apr 19, 2024 · Service Bulletin/Repair Instructions
    To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before…
  • L-SB-0024-24 Apr 19, 2024 · Service Bulletin/Repair Instructions
    The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especi…
  • L-SB-0022-24 Apr 19, 2024 · Service Bulletin/Repair Instructions
    Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and deckl…
  • L-SB-0021-24 Apr 19, 2024 · Service Bulletin/Repair Instructions
    Lexus vehicles are currently protected with RapgardTM protective film designed to protect the horizontal painted surfaces. This material protects from acid rain, environmental fallout, and rail contamination. Follow the Removal Procedure in this bulletin to…
  • L-SB-0020-24 Apr 19, 2024 · Service Bulletin/Repair Instructions
    Vehicles may occasionally be subjected to contamination by airborne iron particles shed from railroad tracks, train wheels, exposure to heavy machinery facilities, grinding, welding, etc. This type of contamination can be identified by the presence of small…
  • L-SB-0007-21 Rev1 Apr 17, 2024 · Service Bulletin/Repair Instructions
    Some 2015 – 2017 model year NX 200t, 2016 – 2017 model year GS 200t, IS 200t, and RC 200t, 2018 – 2019 model year GS 300, and 2018 – 2021 model year NX 300, and 2018 – 2024 model year IS 300 and RC 300 vehicles equipped with an 8AR-FTS engine may exhibit a …
  • LSB004323 Aug 21, 2023 · Service Bulletin/Repair Instructions
    TSB: The air conditioning dye injection tool kit has been developed to aid in identifying the location of air conditioning refrigerant leaks. Follow the procedures outlined in this service bulletin to aid in locating, inspecting, and repairing refrigerant l…
Source: NHTSA manufacturer communications files.