Complaints over time
Complaints about the 2023 Can-am Spyder F3 peaked in 2024, with 2 filed
Owner complaints about this model year, by the year they were filed with NHTSA.
Source: NHTSA ODI complaints file. The lighter column runs through October.
Model year
2023 Can-am Spyder F3
Motorcycle, gasoline, built in Canada. Owner complaints on file from Jan 21, 2024 to May 28, 2026.
Recall campaigns covering this model year11,149 vehicles or units across those campaigns
Owner complaints33.0 times the median 2023 motorcycle
Severity index0.02023 motorcycles average 7.9
First 24 months2Complaints in its first two years
Components
33% of complaints about the 2023 Can-am Spyder F3 name electrical system
Owner complaints by component. Hover or focus a bar for the crash, fire, injury or death count.
Source: NHTSA ODI complaints file. A complaint can name more than one component; it is counted under the first.
Recalls
One recall campaign covers the 2023 Can-am Spyder F3
Check a specific vehicle by VIN on NHTSA's site: a campaign may cover only part of a model year's production.
| Campaign | Filed | Subject | Component | Vehicles | Remedy |
|---|---|---|---|---|---|
| 23V-856 | Dec 17, 2023 | Rearview mirror lens may dislodge from the housing | Visibility and wipers | 1,149 | Repair or modification |
Source: NHTSA ODI recalls file.
Owner complaints
What owners reported about the 2023 Can-am Spyder F3
The full text of every complaint filed with NHTSA about this model year, newest first. Complaints are filed by owners and are not verified by NHTSA; NHTSA removes personal details before publishing.
3 complaints on file, page 1 of 1.
- Filed May 28, 2026Failure Apr 8, 2026Shippenville, PAFuel/propulsion system
On April 8, 2026, while riding on a busy 8 Lane (4 each direction) interstate during evening rush hour, I experienced immediate loss of propulsion when I attempted to engage the throttle. There was absolutely no power, just a grinding noise. I immediately put on my hazard lights and began working my way over toward the right berm. The exit was within a very short distance and I was able to exit the interstate and pulled in to the first road I could. I had to put my Can Am Spyder in neutral so my husband could push me off to the side of the road to safety. There were no warnings or symptoms prior to my immediate loss of propulsion. I was placed in harm's way because most drivers were traveling in excess of the speed limit of 70 mph. I was in fear for my life as there were truck tractors and other vehicles within feet of the rear of my Can Am Spyder as I made my way to safety. The loss of proplusion was caused by the output shaft stripping the front sprocket. The sprocket was physically inspected by a dealership and BRP as well and replaced with another sprocket. I previously had a 2018 Can Am Spyder F3 and the sprocket was replaced 4 times due to the same issue, however my sprockets were always replaced before an epic fail as happened in this case. There was a recall and final fix with a stronger sprocket by BRP. I do not want anyone else to experience this safety issue.
NHTSA complaint 11740587 - Filed Apr 11, 2024Failure Apr 11, 2024Alameda, CAEquipment
The contact owns a Biltwell Bonanza helmet. The contact stated that while driving a 2023 Can-Am Spyder F3 at 60 MPH in windy weather, the helmet visor unexpectedly detached. The contact emailed the helmet retailer to make them aware of the failure. The helmet was not repaired. The manufacturer was not made aware of the failure. The failure mileage was unavailable.
NHTSA complaint 11582439 - Filed Jan 21, 2024Failure Jan 18, 2024Alameda, CAElectrical system, Service brakes, Vehicle speed control
VSS fault Hill hold control not working Loud knock from shifting gear Warranty company refused to provide towing , vehicle is under warranty till 2027. Escalated complaint unaddressed. Not notified of recall since December 2023. Purchased October 2023.
NHTSA complaint 11566787
Source: NHTSA ODI complaints file.
Investigations
NHTSA has not opened an investigation on this model year
Source: NHTSA ODI investigations file.
Service bulletins
6 manufacturer communications cover this model year
Technical service bulletins and other notices the manufacturer sent to dealers. A bulletin is not a recall.
- 145277 Mar 21, 2026 · Other
Under some circonstances it is possible to hear a chirping noise coming from the right side of the engine The noise was identified as worn friction washers on the alternator shaft - TST 144649 Oct 2, 2025 · Other
Spyder seat and top case shock retrofit There is complaints that the seat and top case shocks are too weak A new seat and top case shock absorber we're introduced for MY2025, however claims keep coming in and the wrong replacement part is used - TST 143615 Mar 2, 2025 · Service Bulletin/Repair Instructions
The front sprocket might be stuck on the mainshaft upon disassembly - TST 140875 Rev Mar 18, 2024 · Service Bulletin/Repair Instructions
Revision of TST 140875 P0730 Active Fault Fault code can be triggered if the unit has the wrong rear sprocket or a different wheel size. The cluster will stop displaying the gear indication and check engine light came on (limp home condition) and th… - TST 134170 Mar 26, 2024 · Service Bulletin/Repair Instructions
Engine Oil Level reading Issue Impossible to read the oil level on the dipstick. - Bulletin 2023-5 Mar 15, 2023 · Service Bulletin/Repair Instructions
Warranty Bulletin: Insufficient Torque on the Parking Brake Cable Nut The parking brake cable retaining nut may not have been properly tightened to specification.
Source: NHTSA manufacturer communications files.