Model yearDo not drive

2025 Mack Anthem (AN)

Body and fuel not decoded. Owner complaints on file from no date to no date.

Recall campaigns covering this model year876k vehicles or units across those campaigns
Owner complaints0Not enough peers on file
Severity indexNoneCrash, fire, injury or death per 100
First 24 months0Complaints in its first two years
Complaints over time

Complaints about the 2025 Mack Anthem (AN) by year filed

Owner complaints about this model year, by the year they were filed with NHTSA.

No campaigns match these filters.Reset filters
Source: NHTSA ODI complaints file. The lighter column runs through October.
Components

Complaints by component

Owner complaints by component. Hover or focus a bar for the crash, fire, injury or death count.

No campaigns match these filters.Reset filters
Source: NHTSA ODI complaints file. A complaint can name more than one component; it is counted under the first.
Recalls

8 recall campaigns cover the 2025 Mack Anthem (AN)

Check a specific vehicle by VIN on NHTSA's site: a campaign may cover only part of a model year's production.

Recall campaigns for the 2025 Mack Anthem (AN)
CampaignFiledSubjectComponentVehiclesRemedy
25V-666Oct 6, 2025Seat belt anchorage bracket may be improperly weldedSeat belts15,841Repair or modification
25V-521Aug 11, 2025Dynamic steering and oversteer guidance feature may malfunction and cause a loss of steering controlSteering32Software update
25V-382Jun 10, 2025Power cables may have been improperly routed, which can cause an electrical shortElectrical system8Repair or modification
25V-256Apr 17, 2025Idler gear bracket fasteners may have been improperly tightened, allowing the idler gear to detach from the engineEngine and cooling3Part replacement
24V-792Oct 23, 2024Electrical noise and low signal to the power line carrier may cause the ECU to incorrectly process commands or stop workingElectrical system59,338Software update
24V-567Jul 30, 2024Seat pedestal and seat belt attachment may have been improperly tightenedSeat belts242Part replacement
24V-424Jun 9, 2024Tie rod assemblies may contain an improperly heat-treated ball stud that can fail, resulting in a sudden loss of steering controlDo not drivePowertrain7Part replacement
24V-398Jun 4, 2024Drag link may contain an improperly heat-treated ball stud that can fail, resulting in a sudden loss of steering controlDo not driveSteering972Part replacement
Source: NHTSA ODI recalls file.
Owner complaints

What owners reported about the 2025 Mack Anthem (AN)

The full text of every complaint filed with NHTSA about this model year, newest first. Complaints are filed by owners and are not verified by NHTSA; NHTSA removes personal details before publishing.

0 complaints on file.

    Source: NHTSA ODI complaints file.
    Investigations

    NHTSA has not opened an investigation on this model year

    Source: NHTSA ODI investigations file.
    Service bulletins

    66 manufacturer communications cover this model year

    Technical service bulletins and other notices the manufacturer sent to dealers. A bulletin is not a recall; the 60 most recent are listed.

    • TSB M-913-001 202609 Sep 2, 2026 · Service Bulletin/Repair Instructions
      Parker engine-mounted hydraulic pump service bulletin.
    • S4533 202608 Aug 5, 2026 · Service Campaign
      Mack Trucks has determined that certain AN model trucks equipped with an MP8 Turbo Compound (TC) engine may experience TC Double Idler Gear failure due to incorrect bearing preload. TC units within this population are suspected to be affected, which could r…
    • CBR 159 202608 Aug 10, 2026 · Service Bulletin/Repair Instructions
      Mack Trucks Equipped With A Cummins Engine - Engine Preheat Icon Does Not Illuminate In The Instrument Cluster (IC) During Engine Pre-heat (Intake Air Heater) Operation - Vehicles With 2018Instrument Cluster Update, Model Year2018 And Newer
    • CBR-2592-1 202606 Jun 22, 2026 · Service Bulletin/Repair Instructions
      The purpose of this CBR is to provide steps on how to correct a customer complaint of DTC P107B86 accompanied With intermittent loss of throttle.
    • CBR 2575-1 202604 Apr 30, 2026 · Service Bulletin/Repair Instructions
      CBR - Mack Chassis - Dash Panel Cracking at Mounting to BIW.
    • CBR 2573-1 202604 Apr 9, 2026 · Service Bulletin/Repair Instructions
      CBR - Mack Chassis - Through Shaft Bearing Retainer Breakage On Mack Carriers.
    • CBR 2362-3 202604 Apr 9, 2026 · Service Bulletin/Repair Instructions
      CBR - Mack Carrier Nut Adhesive Change.
    • CBR 2246-5 032026 Mar 2, 2026 · Service Bulletin/Repair Instructions
      CBR - Z Spring Bracket Wear.
    • CBR 2218-6 032026 Mar 3, 2026 · Service Bulletin/Repair Instructions
      CBR - Parker F3 Hydraulic Pump Troubleshooting.
    • CBR 2712-7 032026 Mar 19, 2026 · Service Bulletin/Repair Instructions
      CBR - No Start Condition After Over the Air Programing.
    • S4373 022026 Feb 26, 2026 · Service Campaign
      SC - Mack Trucks has determined that certain Mack sleeper cab assemblies were possibly manufactured with an insufficient number of welds across the rear flange of the upper header
    • S4342 022026 Feb 1, 2026 · Service Campaign
      SC - Mack Trucks has determined that a select group of trucks were built with an AHI Module fuel pressure sensor which does not meet our specifications.
    • CBR 2432-2 202601 Jan 8, 2026 · Service Bulletin/Repair Instructions
      CBR - Mack Chassis - AN And GR Models - Door Glass Shattering.
    • S4270 202512 Dec 2, 2025 · Service Campaign
      SC - Electric Exhaust Heater Control Unit Update
    • CBR 199 202512 Dec 4, 2025 · Service Bulletin/Repair Instructions
      Vehicles affected by this issue will show coolant runoff on the front rights side of the engine.
    • CBR 2171-11 202511 Nov 22, 2025 · Service Bulletin/Repair Instructions
      CBR - Mack Temperature Sensor Troubleshooting Guide
    • CBR 199-6 202511 Nov 12, 2025 · Service Bulletin/Repair Instructions
      CBR - 13 Liter Engines ONLY - Engine Coolant Pump Housing Leak; Coolant Found Around The Oil Cooler Duct Cover Or In Between The Coolant Pump Housing And Oil Cooler Housing.
    • S4632 102025 Oct 1, 2025 · Service Campaign
      SC - The vehicle’s seat belt tether may have been assembled with incorrect hardware.
    • CBR 2517-1 102025 Oct 22, 2025 · Service Bulletin/Repair Instructions
      CBR - Wiper Linkage Inspection.
    • CBR 2496 092025 Sep 12, 2025 · Service Bulletin/Repair Instructions
      The purpose of this CBR is outline the interim software solution for PR(4) andAN(4). Note that this document is subject to updates and currently covers Service Pack updates to B2_T2_1.2.
    • CBR 2172-5 082025 Aug 22, 2025 · Service Bulletin/Repair Instructions
      CBR - When an OTA (Over-The-Air) job starts to program the VECU blocks the starter relay out, if the job ends in a Critical failure, the vehicle will remain in Safe State.
    • S4533 072025 Jul 1, 2025 · Service Campaign
      SC - Mack Trucks has determined that certain AN model trucks equipped with an MP8 Turbo Compound (TC) engine may experience TC Double Idler Gear failure due to incorrect bearing preload.
    • CBR 407 072025 Jul 17, 2025 · Service Bulletin/Repair Instructions
      CBR - To correct the MID136 SID 66 FMI 7 fault code the latest Bendix VCP file will need to downloaded.
    • CBR 2488 072025 Jul 28, 2025 · Service Bulletin/Repair Instructions
      CBR - A significant GPS reporting issue is affecting fleet operations, with trucks maintaining back-office communication but failing to transmit GPS location data.
    • CBR 2464-1 202505 May 1, 2025 · Service Bulletin/Repair Instructions
      Mack Chassis - Rear Axle Overheat
    • CBR 2107-21 202505 May 27, 2025 · Service Bulletin/Repair Instructions
      Mack DEF Level (UQLS) Sensor Troubleshooting Guide - US17+OBD16 Emissions and Newer
    • CBR 901-5 202505 May 13, 2025 · Service Bulletin/Repair Instructions
      Remote Control Central Door Lock, Programming; Key Fob Cannot Be Programmed Or Does Not Work After Programming - Model Year 2018 And Newer
    • CBR 170-8 202505 May 28, 2025 · Service Bulletin/Repair Instructions
      Inactive Code P25AE00 Being Generated After A Hard Pull And A Momentary Drop In Engine Oil Pressure (Low Oil Pressure) (Possible Related Codes - SPN4811 , SPN 100 , PID 100)
    • S4404 202504 Apr 2, 2025 · Service Campaign
      SC - Mack Trucks has determined that certain Anthem and Granite model trucks have a mislabeled Electronic Fuse & Relay Center (EFRC) Cover.
    • CBR-2452 202503 Mar 17, 2025 · Service Bulletin/Repair Instructions
      If the vehicle door is open and the truck is in neutral, a popup message may appear on the Driver Information Display (DID) instructing the operator to shift into neutral. If this message appears while the vehicle is already in neutral, the Instrument Clust…
    • CBR-2449 202503 Mar 12, 2025 · Service Bulletin/Repair Instructions
      Cummins Exhaust Aftertreatment System (EATS) catalysts may experience cracking, which may be attributed to excessive vertical vibration in the exhaust stack. To mitigate this issue, a modification to the exhaust stack length is required.
    • CBR-561 202503 Mar 6, 2025 · Service Bulletin/Repair Instructions
      If oil dilution is suspected refer to the applicable CBR solution below: ∙ CBR-659􀁡Mack Chassis - Oil Diluted With Fuel; Fuel In Oil, Diagnostic Information - All Emissions, All Model Years
    • S4373-202502 Feb 28, 2025 · Service Campaign
      Mack Trucks has determined that certain Mack sleeper cab assemblies were possibly manufactured with an insufficient number of welds across the rear flange of the upper header. The reduced number of welds could lower the designed cab integrity.
    • S4342-202502 Feb 28, 2025 · Service Bulletin/Repair Instructions
      Mack Trucks has determined that a select group of trucks were built with an AHI Module fuel pressure sensor which does not meet our specifications.
    • CBR-2432 202501 Jan 15, 2025 · Service Bulletin/Repair Instructions
      This CBR solution provides detailed instructions for diagnosing and addressing window glass shattering issues, including replacement specifications, interference checks, fastener verification, and reinforcement tab adjustments to ensure proper installation …
    • CBR-2016 202412 Dec 3, 2024 · Service Bulletin/Repair Instructions
      Frame lean can be caused by several seemingly isolated possibilities. The two most common are suspension and frame assembly issues.
    • CBR-997 202411 Nov 14, 2024 · Service Bulletin/Repair Instructions
      Vehicles may present with oil leak coming from the clutch/flywheel housing and observation of burned clutch smell or clutch slipping. These symptoms can be mistaken as a crankshaft rear main seal leak, when the actual cause is the crankshaft adaptor O-ring.
    • CBR-2417 202411 Nov 6, 2024 · Service Bulletin/Repair Instructions
      CBR - 11L Engine block compatibility and Backward Conversion Parts Requirements
    • CBR-2409 202411 Nov 12, 2024 · Service Bulletin/Repair Instructions
      CBR - 13L Engine - Rear Main Oil Seal Leak Model Year 2025
    • CBR-2411 202410 Oct 23, 2024 · Service Bulletin/Repair Instructions
      CBR - One-Box SCR Weld Leaks.
    • CBR-2409 202410 Oct 1, 2024 · Service Bulletin/Repair Instructions
      CBR - 13L Engine - Rear Main Oil Seal Leak - Model Year 2025
    • CBR-2263 202410 Oct 31, 2024 · Service Bulletin/Repair Instructions
      CBR - Mack Chassis - Timing Gear Plate Repair
    • S4088 202409 Oct 1, 2024 · Service Campaign
      Service Campaign: Interaxle Driveline Torque
    • CBR-2387 202409 Sep 2, 2024 · Service Bulletin/Repair Instructions
      CBR: Vehicles Equipped With A Lift Axle - Wheel Speed Fault Code SPN 793, SPN 794 Set When Axle Is Up
    • CBR-2376 202409 Sep 19, 2024 · Service Bulletin/Repair Instructions
      CBR: Drivers Information Display (DID) Inoperative/Goes Blank During Vehicle Operation
    • CBR-731 202409 Sep 16, 2024 · Service Bulletin/Repair Instructions
      CBR: Automated Manual Transmission (AMT) Model D or F (mDrive and I-Shift, AMT-D, AMT-F) - Transmission Oil Leakage From Transmission Input Shaft Seal Or Output Shaft Seal - US10 And Newer Emissions, Common Model Years 2010 And Newer
    • CBR-471 202409 Sep 10, 2024 · Service Bulletin/Repair Instructions
      CBR: The procedure to eliminate the Mack Chassis "Air Restriction Light On" seen in the cluster is to confirm that the parameter YYT is set to "Enable" with Premium Tech Tool.
    • CBR-407 202409 Sep 13, 2024 · Service Bulletin/Repair Instructions
      CBR: To correct the MID136 SID 66 FMI 7 fault code the latest Bendix VCP fi le will need to be downloaded.
    • CBR-561 202408 Aug 13, 2024 · Service Bulletin/Repair Instructions
      CBR: 11L, 13L, And 16L Engine Oil Analysis Specifications - US10 And Newer Emissions
    • CBR-523 202408 Aug 13, 2024 · Service Bulletin/Repair Instructions
      CBR: Overhead Wear Overview - Model Year2018 To Current (Common Rail Fuel System ONLY)
    • CBR-343 202408 Aug 28, 2024 · Service Bulletin/Repair Instructions
      CBR: Mack chassis with an mDRIVE transmission, there have been reports of complete shift assemblies and TECUs being replaced due to technicians being unable to pinpoint the source of the air leak.
    • S0488 202407 Jul 24, 2024 · Service Campaign
      Service Campaign: Interaxle Driveline Torque
    • CBR-2384 202407 Jul 10, 2024 · Service Bulletin/Repair Instructions
      CBR: Mack Chassis - Day Cab Glass Breakage
    • CBR-2356 202407 Jul 9, 2024 · Service Bulletin/Repair Instructions
      CBR: Drivers Information Display (DID)Inoperative After Cluster Replacement And Programming
    • CBR-2350 202407 Jul 2, 2024 · Service Bulletin/Repair Instructions
      CBR: Telematics Gateway (TGW) Connect Ability Issues
    • CBR-2024 202407 Jul 8, 2024 · Service Bulletin/Repair Instructions
      CBR: Mack Anthem (AN) And Pinnacle (PI) -Bendix ABS Fault SPN 807 FMI 13 Blink code 19-4
    • CBR-2384 202406 Jun 29, 2024 · Service Bulletin/Repair Instructions
      CBR - Mack Chassis - Day Cab Glass Breakage
    • CBR-2383 202406 Jun 19, 2024 · Service Bulletin/Repair Instructions
      CBR - Accelerator Pedal: Inspection Instructions
    • CBR-2376 202406 Jun 11, 2024 · Service Bulletin/Repair Instructions
      CBR - Drivers Information Display (DID) Inoperative/Goes Blank During Vehicle Operation
    • CBR-2356 202406 Jun 8, 2024 · Service Bulletin/Repair Instructions
      CBR - Drivers Information Display (DID) Inoperative After Cluster Replacement And Programming
    Source: NHTSA manufacturer communications files.